LBN12002

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 10MHz Bandwidth Part Number: LBN12002 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 18 dB Bandwidth 25 dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 119.875 10.1 40 Typical 120 22 10.13 10.83 10.95 11.02 11.21 1.2 2.88 45 -11.28 YZ LN 25 Maximum 120.125 28 10.9 11.2 11.5 12.5 1.5 3 - -40 -45 - 0 1A +85 +105 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12002 2008-02-18 1.1 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 10MHz Bandwidth Part Number: LBN12002 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: SIPAT LBN12002 08XX Input Output 1 5 12.80 0.5 4.7 4.5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN12002: Part Number 3) 08XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN12002 2008-02-18 1.1 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 10MHz Bandwidth Part Number: LBN12002 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -12.2315 -22.2315 -21.7315 -21.2315 Passband Respond -32.2315 -42.2315 Magnitude(dB) -52.2315 -62.2315 -72.2315 -82.2315 -92.2315 -24.2315 -23.2315 -22.2315 -22.7315 -23.7315 -102.2315 -112.2315 100 105 110 115 120 125 Frequency(MHz) 130 135 140 -24.7315 110 112 114 116 118 120 122 124 126 128 130 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±5MHz) Type Performance 3300 15 Phase Linearity(f0±5MHz) Type Performance 3200 10 3100 3000 5 X: 115 Y: 0.6734 X: 125 Y: 2796 2900 Group Delay Time(ns) X: 115 Y: 2823 X: 120 Y: 2806 X: 125 Y: 0.00718 2800 Degree(deg) 0 X: 120 Y: -4.811 2700 -5 2600 -10 2500 2400 -15 2300 2200 114 116 118 120 Frequency(MHz) 122 124 126 -20 114 116 118 120 Frequency(MHz) 122 124 126 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12002 2008-02-18 1.1 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com