LBN12012_10

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBN12012 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 20 dB Bandwidth 25 dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 119.875 15 40 Typical 120 25.4 15.07 15.21 15.73 15.81 15.87 15.98 0.9 2.87 44 -11.28 YZ LN 25 Maximum 120.125 27 15.8 16.05 16.5 17.5 1.5 2.95 - -40 -45 - 0 1A +85 +105 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12012 2010-07-30 2.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBN12012 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: SIPAT LBN12012 XXYYZZ Input Output 1 5 12.80 0.50 4.70 0.50 4.50 0.50 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN12012: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN12012 2010-07-30 2.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBN12012 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -15.4194 -25.4194 -35.4194 -24.9194 -23.9194 Passband Response Type Performance -24.4194 -45.4194 Magnitude(dB) A m plitude ripple(dB ) -55.4194 -65.4194 -75.4194 -85.4194 -25.4194 -25.9194 -26.4194 -26.9194 -95.4194 -105.4194 -115.4194 70 80 90 100 110 120 130 Frequency(MHz) 140 150 160 170 -27.4194 -27.9194 105 110 115 120 Frequency(MHz) 125 130 135 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±7MHz) Type Performance 3200 15 Phase Linearity(f0±7MHz) Type Performance 3100 10 3000 5 X: 120 Y: 1.573 X: 127 Y: 2838 G roup Delay T im e(ns ) 2900 Degree(deg) 0 X: 113 Y: -0.6498 X: 127 Y: 1.382 X: 113 Y: 2856 X: 120 Y: 2867 2800 -5 2700 -10 2600 2500 110 115 120 Frequency(MHz) 125 130 -15 110 115 120 Frequency(MHz) 125 130 Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12012 2010-07-30 2.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com