LBN12026

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 71MHz Bandwidth Part Number: LBN12026 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3 dB Bandwidth Passband Variation Absolute Delay Group Delay variation(f0±35MHz) @f0±38～f0±45MHz @ f0±55MHz Ultimate Rejection DC～500MHz Unit MHz dB MHz dB usec nsec dB dB dB KHz/°C °C °C °C V dBm - Minimum 119.5 - Typical 120 22.5 69.83 1 1.16 13 8 45 27 -9.84 128LN 25 Maximum 120.5 25 - Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. -40 -45 0 +85 +105 - 1 SMD13.3*6.5C 10 All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12026 2007-11-19 2.0 Page 1/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 71MHz Bandwidth Part Number: LBN12026 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L1=27nH OUTPUT 50Ω C1=4.7pF INPUT 50Ω C1 Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension +0.2 13.3-0.1 Pad Configuration: 10 11 12 9 8 7 +0.2 6.5-0.1 Input 6 5 11 5 SIPAT LBN12026 07XX 3 4 Output Ground All Others Marking Configuration: 1.56 0.1 0.76 0.4 0.79 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) LBN12026: Part Number 4) 07XX: Date Code 5 6 1 1.5 2 3 4 12 11 10 2.54 9 8 7 Package: SMD13.3*6.5C Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12026 2007-11-19 2.0 Page 2/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 71MHz Bandwidth Part Number: LBN12026 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -12.495 -22.495 -32.495 -21.995 -20.995 Passband Respond -21.495 -42.495 Magnitude(dB) -52.495 -62.495 -72.495 -82.495 -23.995 -22.495 -22.995 -23.495 -92.495 -102.495 -112.495 -24.495 -24.995 20 40 60 80 100 120 140 Frequency(MHz) 160 180 200 220 70 80 90 100 110 120 130 140 150 160 170 Horizontal: 20MHz/Div Vertical: 10dB/Div Horizontal: 10MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±30MHz) Type Performance 1200 10 Phase Linearity(f0±30MHz) Type Performance 1190 5 1180 X: 120 Y: 1.581 1170 X: 89.78 Y: 1157 X: 149.9 Y: 1158 0 Group Delay Time(ns) 1160 X: 120 Y: 1156 X: 89.78 Y: -2.02 X: 149.9 Y: -2.172 1150 Degree(deg) 60 80 100 120 Frequency(MHz) 140 160 180 -5 1140 1130 -10 1120 1110 -15 1100 60 80 100 120 Frequency(MHz) 140 160 180 Horizontal: 20MHz/Div Vertical: 10ns/Div Horizontal: 20MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12026 2007-11-19 2.0 Page 3/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com