LBN12029

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 14MHz Bandwidth Part Number: LBN12029 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Group Delay Variation(f0±7MHz) Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB nsec usec dB KHz/°C °C °C °C V dBm - Minimum 119.92 14 50 Typical 120 23 13.91 14.21 15.33 15.44 0.7 80 2.48 54 -9.84 128LN 25 Maximum 120.08 25 15.7 1 200 - -40 -45 0 +85 +105 - 1 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12029 2007-12-27 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 14MHz Bandwidth Part Number: LBN12029 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50 L1 C1 OUTPUT 50 L1=27nH L2=33nH C1=39pF Source/Load Impedance=50 ohm L2 Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBN12029 07XX Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN12029: Part Number 3) 07XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN12029 2007-12-27 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 14MHz Bandwidth Part Number: LBN12029 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -12.9291 -22.9291 -32.9291 -22.4291 -21.4291 Passband Respond -21.9291 -42.9291 Magnitude(dB) -52.9291 -62.9291 -72.9291 -82.9291 -24.4291 -22.9291 -23.4291 -23.9291 -92.9291 -102.9291 -112.9291 95 -24.9291 100 105 110 115 120 125 Frequency(MHz) 130 135 140 145 110 115 120 125 130 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±7MHz) Type Performance 2700 40 Phase Linearity(f0±7MHz) Type Performance 2650 30 2600 20 X: 127 Y: 8.642 X: 113 Y: 3.494 X: 120 Y: -1.496 2550 10 Group Delay Time(ns) 2500 X: 120 Y: 2488 2450 X: 127 Y: 2438 Degree(deg) 130 X: 113 Y: 2464 0 -10 2400 -20 2350 -30 2300 2250 -40 2200 110 112 114 116 118 120 Frequency(MHz) 122 124 126 128 -50 110 112 114 116 118 120 Frequency(MHz) 122 124 126 128 130 Horizontal: 2MHz/Div Vertical: 50ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12029 2007-12-27 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com