LBN12037

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 20MHz Bandwidth Part Number: LBN12037 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 23 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Phase Linearity(f0±10MHz) Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec deg dB KHz/°C °C °C °C V dBm - Minimum 119.85 20.05 40 Typical 120 27 20.06 20.75 20.87 20.92 1.4 3.33 16 50 -11.28 YZ LN 25 Maximum 120.15 28 20.8 21 21.6 1.5 4 - -40 -45 0 +85 +105 - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12037 2008-08-25 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 20MHz Bandwidth Part Number: LBN12037 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω L1 L2 L1=L2=33nH OUTPUT 50Ω Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: 12.80 0.5 SIPAT LBN12037 XXYYZZ Input Output 1 5 Ground All Others 4.7 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN12037: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 4.5 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN12037 2008-08-25 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 20MHz Bandwidth Part Number: LBN12037 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -16.8816 -26.8816 -36.8816 -26.3816 -25.3816 Passband Respond Type Performance -25.8816 -46.8816 Magnitude(dB) Amplitude ripple(dB) -56.8816 -66.8816 -76.8816 -86.8816 -26.8816 -27.3816 -27.8816 -28.3816 -96.8816 -106.8816 -116.8816 70 -28.8816 80 90 100 110 120 130 Frequency(MHz) 140 150 160 170 -29.3816 100 105 110 115 120 Frequency(MHz) 125 130 135 140 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±10MHz) Type Performance 3600 80 Phase Linearity(f0±10MHz) Type Performance 60 3500 40 3400 20 X: 110 Y: 4.126 X: 130 Y: 8.46 X: 120 Y: -1.716 Group Delay Time(ns) 3300 X: 130 Y: 3287 Degree(deg) 135 X: 110 Y: 3318 X: 120 Y: 3327 0 -20 3200 -40 -60 3100 -80 3000 105 110 115 120 Frequency(MHz) 125 130 -100 105 110 115 120 Frequency(MHz) 125 130 135 Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Vertical: 20deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12037 2008-08-25 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com