LBN12406

China Electronics Technology Group Corporation No.26 Research Institute 123.5MHz SAW Filter 12MHz Bandwidth Part Number: LBN12406 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±10MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz dB usec dB KHz/°C °C °C V dBm - Minimum 123.35 11.8 50 Typical 123.5 22.6 11.71 11.86 12.56 12.66 12.7 12.74 0.9 3.4 65 -11.6 YZ LN 25 Maximum 123.65 27 12.65 1.5 4 - -25 - 0 1A +85 10 DIP3512 (35.0x12.8x4.7) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12406 2011-09-14 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 123.5MHz SAW Filter 12MHz Bandwidth Part Number: LBN12406 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50 1 5 OUTPUT 50 Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBN12406 XXYYZZ Pad Configuration: Input Output 1 5 Ground 2,3,4,6 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN12406: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN12406 2011-09-14 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 123.5MHz SAW Filter 12MHz Bandwidth Part Number: LBN12406 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -12.6357 -22.6357 -32.6357 -22.1357 -21.1357 Passband Response Type Performance -21.6357 -42.6357 Magnitude(dB) Amplitude ripple(dB) -52.6357 -62.6357 -72.6357 -82.6357 -22.6357 -23.1357 -23.6357 -24.1357 -92.6357 -102.6357 -112.6357 100 105 110 115 120 125 130 Frequency(MHz) 135 140 145 -24.6357 -25.1357 115 120 125 Frequency(MHz) 130 135 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±5.5MHz) Type Performance 3800 40 Phase Linearity(f0±5.5MHz) Type Performance 3700 30 3600 20 X: 129 Y: 8.07 3500 Group Delay Time(ns) X: 123.5 Y: 3407 10 X: 118 Y: 3.661 Degree(deg) 3400 X: 118 Y: 3352 X: 129 Y: 3369 0 X: 123.5 Y: -3.168 3300 -10 3200 -20 3100 -30 3000 -40 2900 114 116 118 120 122 124 Frequency(MHz) 126 128 130 132 -50 114 116 118 120 122 124 Frequency(MHz) 126 128 130 132 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN12406 2011-09-14 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com