LBN15502

China Electronics Technology Group Corporation No.26 Research Institute 154.9MHz SAW Filter 8MHz Bandwidth Part Number: LBN15502 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth 53 dB Bandwidth Group Delay Variation(f0±1.3MHz) Passband Variation Absolute Delay Ultimate Rejection(f0±19.2MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz MHz nsec dB usec dB KHz/°C °C V dBm - Minimum 154.75 8.25 53 Typical 154.9 23.7 8.16 8.31 9.1 9.16 9.21 9.27 9.31 310 0.7 3.15 57 -14.6 YZ LN 25 0 Maximum 155.05 30 9.2 9.6 10.4 18.4 1.5 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN15502 2010-07-21 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 154.9MHz SAW Filter 8MHz Bandwidth Part Number: LBN15502 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω OUTPUT 50Ω Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN15502 XXYYZZ Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN15502: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN15502 2010-07-21 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 154.9MHz SAW Filter 8MHz Bandwidth Part Number: LBN15502 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -13.7213 -23.7213 -33.7213 -23.2213 -22.2213 Passband Response Type Performance -22.7213 -43.7213 Magnitude(dB) Amplitude ripple(dB) -53.7213 -63.7213 -73.7213 -83.7213 -23.7213 -24.2213 -24.7213 -25.2213 -93.7213 -103.7213 -113.7213 130 135 140 145 150 155 160 Frequency(MHz) 165 170 175 -25.7213 -26.2213 146 148 150 152 154 156 Frequency(MHz) 158 160 162 164 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4MHz) Type Performance 4000 Phase Linearity(f0±4MHz) Type Performance 80 60 40 20 Degree(deg) 0 -20 -40 -60 -80 -100 X: 150.9 Y: 4.07 X: 158.9 Y: 15.92 X: 154.9 Y: -7.384 3800 3600 3400 Group Delay Time(ns) 3200 X: 150.9 Y: 2983 X: 154.9 Y: 3140 X: 158.9 Y: 3107 3000 2800 2600 2400 2200 150 152 154 Frequency(MHz) 156 158 160 150 152 154 156 Frequency(MHz) 158 160 Horizontal: 2MHz/Div Vertical: 200ns/Div Horizontal: 2MHz/Div Vertical: 20deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN15502 2010-07-21 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com