LBN16504

China Electronics Technology Group Corporation No.26 Research Institute 165MHz SAW Filter 20MHz Bandwidth Part Number: LBN16504 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Single-ended operation Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth Passband Variation Group Delay Variation(f0±10MHz) Absolute Delay 10～110MHz Ultimate Rejection 127～149MHz 190～450MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz dB nsec usec dB dB dB KHz/°C °C °C °C V dBm - Minimum 20 35 10 33 Typical 165 7.5 24.23 0.7 25 0.28 43 14 35 -13.53 128LN 25 Maximum 9 1.2 80 0.4 - -40 -45 0 +85 +105 - 1A 25 SMD3.8*3.8 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN16504 2008-04-10 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 165MHz SAW Filter 20MHz Bandwidth Part Number: LBN16504 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=L2=150nH OUTPUT 50Ω INPUT 50Ω C1 C1=12pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 3.80 0.2 Pad Configuration: Input Output 3.80 0.2 6 2 5 1.5MAX Package: SMD3.8*3.8 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 1 SIPAT 16504 XXYYZZ Ground All Others 5 2 3 6 5 1.27 4 4 Marking Configuration: 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) 16504: Part Number 4) XXYY: Batch No.(Year/Month) 5) ZZ: Identifying Code 1 1.90 2 3 0.60 1.80 Unit: mm Part Number Rev. Date Ver. LBN16504 2008-04-10 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 165MHz SAW Filter 20MHz Bandwidth Part Number: LBN16504 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -5.9843 Passband Respond -7.4843 -6.4843 -17.4843 -6.9843 -27.4843 Magnitude(dB) -7.4843 -37.4843 -7.9843 -47.4843 -8.4843 -57.4843 -8.9843 -67.4843 -9.4843 -77.4843 100 120 140 160 Frequency(MHz) 180 200 220 240 -9.9843 145 150 155 160 165 170 175 180 185 Horizontal: 20MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±10MHz) Type Performance 360 20 Phase Linearity(f0±10MHz) Type Performance 340 15 10 320 5 300 Group Delay Time(ns) X: 154.9 Y: 276.8 X: 165 Y: 278.3 X: 154.9 Y: -0.1028 X: 165 Y: -0.7401 X: 175.1 Y: 2.273 0 Degree(deg) 180 185 X: 175.1 Y: 270.1 280 -5 260 -10 240 -15 220 -20 -25 200 -30 180 145 150 155 160 165 Frequency(MHz) 170 175 145 150 155 160 165 Frequency(MHz) 170 175 180 185 Horizontal: 5MHz/Div Vertical: 20ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.2 0.5 1.0 2.0 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN16504 2008-04-10 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com