LBN19204

China Electronics Technology Group Corporation No.26 Research Institute 192MHz SAW Filter 32MHz Bandwidth Part Number: LBN19204 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth Passband Variation Absolute Delay 112～128MHz 128～144MHz Ultimate ejection 144～160MHz 224～240MHz 240～1000MHz Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz dB usec dB dB dB dB dB KHz/°C °C V dBm - Minimum 32 50 45 30 30 45 Typical 192 13 33.3 0.8 0.68 58 55 51 54 58 -18 YZ LN 25 0 Maximum 15 1 - - 1A 10 SMD7.0*5.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN19204 2011-01-12 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 192MHz SAW Filter 32MHz Bandwidth Part Number: LBN19204 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=33nH INPUT 50Ω L1 L2 OUTPUT 50Ω L2=56nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 7.00±0.15 8 9 7 6 5.00±0.15 5 Pad Configuration: Input: 9 Output: 4 Ground: All Others 10 SIPAT LBN19204 XXYYZZ 1 2 3 4 1.50±0.15 0.80 Marking Configuration: 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) LBN19204: Part Number 4) XXYY: Date(Year/month) 0.60 1 10 2 3 1.00 4 2.54 5) ZZ: Identified Code 9 8 7 6 5 1.27 Package: SMD7.0*5.0 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN19204 2011-01-12 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 192MHz SAW Filter 32MHz Bandwidth Part Number: LBN19204 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -2.9933 -12.9933 -22.9933 -12.4933 -11.4933 Passband Response Type Performance -11.9933 -32.9933 Magnitude(dB) A m plitude ripple(dB ) -42.9933 -52.9933 -62.9933 -72.9933 -12.9933 -13.4933 -13.9933 -14.4933 -82.9933 -92.9933 -102.9933 -14.9933 100 120 140 160 180 200 220 Frequency(MHz) 240 260 280 -15.4933 160 170 180 190 Frequency(MHz) 200 210 220 Horizontal: 20MHz/Div Vertical: 10dB/Div Horizontal: 10MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±16MHz) Type Performance 850 25 Phase Linearity(f0±16MHz) Type Performance 20 800 15 750 10 5 G roup Delay T im e(ns ) 700 X: 176 Y: 669.4 X: 192 Y: 670.6 X: 208 Y: 683.8 X: 208 Y: 3.225 Degree(deg) 0 X: 176 Y: -2.304 X: 192 Y: -0.0798 -5 650 -10 600 -15 -20 550 -25 500 170 180 190 Frequency(MHz) 200 210 220 -30 170 180 190 Frequency(MHz) 200 210 220 Horizontal: 10MHz/Div Vertical: 50ns/Div Horizontal: 10MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN19204 2011-01-12 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com