LBN20010

China Electronics Technology Group Corporation No.26 Research Institute 200MHz SAW Filter 75MHz Bandwidth Part Number: LBN20010 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 45 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±53MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 199 75 45 Typical 200 24.6 77.72 78.88 85.8 0.8 0.97 55 -16.4 128LN 25 0 Maximum 201 28 100 1.5 - - 1A 10 DIP2212 (22.2x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN20010 2009-10-21 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 200MHz SAW Filter 75MHz Bandwidth Part Number: LBN20010 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω L1 Notes - Component values may change depending on board layout. L2 L3 OUTPUT 50Ω L1=39nH L2=22nH L3=47nH Source/Load Impedance=50 ohm Package Dimension 22.20 0.50 Pad Configuration: SIPAT LBN20010 XXYYZZ Input Output 1 5 12.80 0.50 4.70 0.50 4.50 0.50 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN20010: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.20 3 Package: DIP2212 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 6 5 12.70 0.20 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBN20010 2009-10-21 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 200MHz SAW Filter 75MHz Bandwidth Part Number: LBN20010 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -14.6113 -24.6113 -34.6113 -24.1113 -23.1113 Passband Response Type Performance -23.6113 -44.6113 Magnitude(dB) A m plitude ripple(dB ) -54.6113 -64.6113 -74.6113 -84.6113 -24.6113 -25.1113 -25.6113 -26.1113 -94.6113 -104.6113 -114.6113 100 -26.6113 120 140 160 180 200 220 Frequency(MHz) 240 260 280 300 -27.1113 100 120 140 160 180 200 Frequency(MHz) 220 240 260 280 300 Horizontal: 20MHz/Div Vertical: 10dB/Div Horizontal: 20MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±35MHz) Type Performance 60 1040 Phase Linearity(f0±35MHz) Type Performance 1020 40 1000 20 980 G roup Delay T im e(ns ) X: 165 Y: 966.9 X: 200 Y: 968 D egree(deg) X: 235 Y: 960.4 960 0 X: 165 Y: -4.596 X: 200 Y: 0.01065 X: 235 Y: 4.095 940 -20 920 -40 900 880 -60 860 150 160 170 180 190 200 Frequency(MHz) 210 220 230 240 250 150 160 170 180 190 200 Frequency(MHz) 210 220 230 240 250 Horizontal: 10MHz/Div Vertical: 20ns/Div Horizontal: 10MHz/Div Vertical: 20deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN20010 2009-10-21 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com