LBS11406

China Electronics Technology Group Corporation No.26 Research Institute 113.6MHz SAW Filter 3MHz Bandwidth Part Number: LBS11406 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay f0±2.1MHz f0±2.3MHz Ultimate Rejection f0±2.7MHz f0±6.7MHz Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz dB usec dB dB dB dB KHz/°C °C °C °C V dBm - Minimum 113.5 3.4 35 45 50 55 Typical 113.6 23 3.44 4.2 0.7 3.45 39 52 55 58 0.11 Qz 25 Maximum 113.7 28 1.5 4 - -40 -45 0 +85 +105 - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11406 2008-12-12 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 113.6MHz SAW Filter 3MHz Bandwidth Part Number: LBS11406 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=120nH L2=100nH OUTPUT 50Ω C2 Notes - Component values may change depending on board layout. INPUT 50Ω C1 C1=C2=82pF Source/Load Impedance=50 ohm Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBS11406 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS11406: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBS11406 2008-12-12 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 113.6MHz SAW Filter 3MHz Bandwidth Part Number: LBS11406 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -13.0221 -23.0221 -33.0221 -22.5221 -21.5221 Passband Respond Type Performance -22.0221 -43.0221 Magnitude(dB) Amplitude ripple(dB) -53.0221 -63.0221 -73.0221 -83.0221 -23.0221 -23.5221 -24.0221 -24.5221 -93.0221 -103.0221 -113.0221 -25.0221 -25.5221 104 106 108 110 112 114 116 Frequency(MHz) 118 120 122 109 110 111 112 113 114 Frequency(MHz) 115 116 117 118 Horizontal: 2MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±1.6MHz) Type Performance 4400 15 Phase Linearity(f0±1.6MHz) Type Performance 4200 10 4000 5 X: 115.2 Y: 2.162 X: 113.6 Y: 3531 X: 115.2 Y: 3478 X: 113.6 Y: -0.554 3800 Group Delay Time(ns) 3600 3400 Degree(deg) X: 112 Y: 3446 0 X: 112 Y: -1.939 3200 -5 3000 -10 2800 2600 -15 2400 111 112 113 114 Frequency(MHz) 115 116 -20 111 112 113 114 Frequency(MHz) 115 116 Horizontal: 1MHz/Div Vertical: 200ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11406 2008-12-12 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com