LBS11407

China Electronics Technology Group Corporation No.26 Research Institute 114.1MHz SAW Filter 3MHz Bandwidth Part Number: LBS11407 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±15MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 113.95 2.9 53 Typical 114.1 24.5 2.84 2.99 3.74 3.78 3.83 3.87 0.3 3.3 60 0.11 Qz 25 0 Maximum 114.25 27 3.8 4.2 5 1.5 - - 1C 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11407 2010-09-25 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 114.1MHz SAW Filter 3MHz Bandwidth Part Number: LBS11407 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L1=120nH L2=82nH L2 OUTPUT 50Ω C2 INPUT 50Ω C1 C1=47pF C2=22pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBS11407 XXYYZZ Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS11407: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBS11407 2010-09-25 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 114.1MHz SAW Filter 3MHz Bandwidth Part Number: LBS11407 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -14.505 -23.005 Passband Response Type Performance -24.505 -23.505 -34.505 -24.005 -44.505 -24.505 Amplitude ripple(dB) 100 105 110 115 Frequency(MHz) 120 125 -54.505 Magnitude(dB) -64.505 -25.005 -74.505 -25.505 -84.505 -26.005 -94.505 -26.505 -104.505 -114.505 -27.005 111 112 113 114 Frequency(MHz) 115 116 117 118 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±1.4MHz) Type Performance 3800 10 Phase Linearity(f0±1.4MHz) Type Performance 3700 8 3600 6 3500 4 3400 Group Delay Time(ns) X: 112.7 Y: 3257 X: 114.1 Y: 3323 2 X: 115.5 Y: 3272 X: 114.1 Y: -0.3773 X: 115.5 Y: 0.8655 X: 112.7 Y: -1.185 3300 Degree(deg) 116 117 0 3200 -2 3100 -4 3000 -6 2900 -8 2800 -10 2700 112 113 114 Frequency(MHz) 115 -12 112 113 114 Frequency(MHz) 115 116 117 Horizontal: 1MHz/Div Vertical: 100ns/Div Horizontal: 1MHz/Div Vertical: 2deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11407 2010-09-25 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com