LBS11601

China Electronics Technology Group Corporation No.26 Research Institute 116MHz SAW Filter 1MHz Bandwidth Part Number: LBS11601 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±1.5MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 115.95 1.23 1.4 50 Typical 116 20.5 1.34 1.53 2.2 2.34 0.4 3.94 60 0.116 QZ 25 Maximum 116.05 22 2.3 0.7 - -40 -45 0 +85 +105 - 1 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11601 2007-12-17 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 116MHz SAW Filter 1MHz Bandwidth Part Number: LBS11601 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=L2=82nH OUTPUT 50Ω C2 Notes - Component values may change depending on board layout. INPUT 50Ω C1 C1=33pF C2=36pF Source/Load Impedance=50 ohm Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBS11601 07XX Pad Configuration: Input Output 1 5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS11601: Part Number 3) 07XX: Date Code 4.7 4.5 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBS11601 2007-12-17 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 116MHz SAW Filter 1MHz Bandwidth Part Number: LBS11601 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -10.5448 -20.5448 -30.5448 -20.0448 -40.5448 Magnitude(dB) -50.5448 -60.5448 -70.5448 -80.5448 -22.0448 -90.5448 -100.5448 -110.5448 111 -22.5448 -23.0448 114.5 -20.5448 -21.0448 -21.5448 -19.0448 -19.5448 Passband Respond 112 113 114 115 116 117 Frequency(MHz) 118 119 120 121 115 115.5 116 116.5 117 Horizontal: 1MHz/Div Vertical: 10dB/Div Horizontal: 0.5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±0.6MHz) Type Performance 10 4400 Phase Linearity(f0±0.6MHz) Type Performance 8 6 4200 4 Group Delay Time(ns) 4000 X: 115.4 Y: 3936 X: 116 Y: 3972 2 X: 116.6 Y: 3932 X: 116 Y: 0.2309 X: 115.4 Y: 0.445 X: 116.6 Y: 0.7466 Degree(deg) 115 115.5 116 Frequency(MHz) 116.5 117 117.5 0 3800 -2 -4 3600 -6 -8 3400 -10 -12 3200 114.5 114.5 115 115.5 116 Frequency(MHz) 116.5 117 117.5 Horizontal: 0.5MHz/Div Vertical: 200ns/Div Horizontal: 0.5MHz/Div Vertical: 2deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS11601 2007-12-17 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com