LBS14021_09

China Electronics Technology Group Corporation No.26 Research Institute 140MHz SAW Filter 6MHz Bandwidth Part Number: LBS14021 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth 50 dB Bandwidth Passband Variation Phase Linearity(f0±MHz) Group Delay Variation(f0±MHz) Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB deg nsec usec dB KHz/°C °C °C °C V dBm - Minimum 139.8 5.6 6 50 Typical 140 26.3 5.8 6.21 7.8 8.05 0.6 4 30 1.92 51 0.14 Qz 25 Maximum 140.2 28 8.4 9 1 110 - -40 -45 0 +85 +105 - 1A 10 DIP2212 (22.2x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS14021 2009-02-13 1.1 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 140MHz SAW Filter 6MHz Bandwidth Part Number: LBS14021 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=(150+27)nH OUTPUT 50Ω C2 L2=180nH INPUT 50Ω C1 C1=18pF C2=22pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 22.20 0.50 12.80 0.50 SIPAT LBS14021 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.70 4.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS14021: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.20 3 Package: DIP2212 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 6 12.70 0.20 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBS14021 2009-02-13 1.1 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 140MHz SAW Filter 6MHz Bandwidth Part Number: LBS14021 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -16.3308 -26.3308 -36.3308 -25.8308 -24.8308 Passband Respond Type Performance -25.3308 -46.3308 Magnitude(dB) A m plitude ripple(dB ) -56.3308 -66.3308 -76.3308 -86.3308 -26.3308 -26.8308 -27.3308 -27.8308 -96.3308 -106.3308 -116.3308 120 -28.3308 125 130 135 140 145 Frequency(MHz) 150 155 160 -28.8308 130 132 134 136 138 140 Frequency(MHz) 142 144 146 148 150 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±3MHz) Type Performance 2100 Phase Linearity(f0±3MHz) Type Performance 15 2050 10 2000 1950 G roup Delay T im e(ns ) X: 137 Y: 1915 5 X: 140 Y: 1925 X: 143 Y: 1908 X: 140 Y: 0.2956 X: 143 Y: -0.2172 D egree(deg) 1900 0 X: 137 Y: -1.807 1850 -5 1800 -10 1750 -15 1700 135 136 137 138 139 140 Frequency(MHz) 141 142 143 144 145 -20 135 136 137 138 139 140 Frequency(MHz) 141 142 143 144 145 Horizontal: 1MHz/Div Vertical: 50ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS14021 2009-02-13 1.1 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com