LBS14801

China Electronics Technology Group Corporation No.26 Research Institute 147.7MHz SAW Filter 4MHz Bandwidth Part Number: LBS14801 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Group Delay Variation(f0±MHz) Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB nsec usec dB KHz/°C °C °C °C V dBm - Minimum 147.6 4 4.2 45 Typical 147.7 22.3 4.03 4.32 5.34 0.7 110 2.86 47 0.15 Qz 25 Maximum 147.8 26 5.5 1 200 - -40 -45 0 +85 +105 - 1A 10 DIP2712 (27.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS14801 2008-01-23 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 147.7MHz SAW Filter 4MHz Bandwidth Part Number: LBS14801 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=100nH L2=68nH OUTPUT 50Ω C2 Notes - Component values may change depending on board layout. INPUT 50Ω C1 C1=33pF C2=(55+22)pF Source/Load Impedance=50 ohm Package Dimension 27.00 0.5 Pad Configuration: SIPAT LBS14801 08XX Input Output 1 5 12.80 0.5 4.7 4.5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS14801: Part Number 3) 08XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP2712 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 17.70 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBS14801 2008-01-23 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 147.7MHz SAW Filter 4MHz Bandwidth Part Number: LBS14801 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -12.2941 -22.2941 -32.2941 -21.7941 -20.7941 Passband Respond -21.2941 -42.2941 Magnitude(dB) -52.2941 -62.2941 -72.2941 -82.2941 -23.7941 -22.2941 -22.7941 -23.2941 -92.2941 -102.2941 -112.2941 138 -24.2941 140 142 144 146 148 150 Frequency(MHz) 152 154 156 145 146 147 148 149 150 151 Horizontal: 2MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±2MHz) Type Performance 3100 10 Phase Linearity(f0±2MHz) Type Performance 3000 5 X: 149.7 Y: 1.915 X: 147.7 Y: -0.363 2900 Group Delay Time(ns) X: 145.7 Y: 2846 X: 147.7 Y: 2886 X: 145.7 Y: -0.775 X: 149.7 Y: 2830 0 Degree(deg) -5 -10 2800 2700 2600 2500 144 145 146 147 148 Frequency(MHz) 149 150 151 -15 144 145 146 147 148 Frequency(MHz) 149 150 151 Horizontal: 1MHz/Div Vertical: 100ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS14801 2008-01-23 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com