LBT08506

China Electronics Technology Group Corporation No.26 Research Institute 84.5MHz SAW Filter 9.2MHz Bandwidth Part Number: LBT08506 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 40dB Bandwidth Amplitude ripple（+/-4.375MHz） Group Delay Variation（+4.375MHz） Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz dB ns usec dB KHz/°C °C °C °C dBm - Minimum 84.35 9.16 - Typical 84.5 21.7 9.27 10.86 0.5 55.6 Maximum 84.65 25 11 1 150 - 40 1.6 42 -1.52 112°LT 25 -40 -45 - 1A +85 +85 10 SMD1365C SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT08506 2011-12-12 1.0 Page 1/3 Phone: Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62808382 Fax: +86-23-62805284 www.sipatsaw.com / sales@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 84.5MHz SAW Filter 9.2MHz Bandwidth Part Number: LBT08506 www.sipatsaw.com SIPAT Co., Ltd. 手动测试座： Matching Configuration L1=120nH L2=120nH C1=56pF C2=36pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 13.3±0.2 Pad Configuration: 7 6.5±0.2 10 11 12 1 9 8 Input Output 6 5 11 5 SIPAT LBT08506 XXYYZZ 2 3 4 Ground All others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT08506: Part Number 3) XXYY: Date(Year/month) 1.61 0.19 0.76 0.4 0.8 4) ZZ: Identified Code 1 1.5 2 3 4 5 6 12 11 10 2.54 9 8 7 Package: SMD1365C Unit: mm Typical Performance SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT08506 2011-12-12 1.0 Page 2/3 Phone: Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62808382 Fax: +86-23-62805284 www.sipatsaw.com / sales@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 84.5MHz SAW Filter 9.2MHz Bandwidth Part Number: LBT08506 Passband Response Type Performance -19.2339 -19.7339 -20.2339 -20.7339 Amplitude ripple(dB) -21.2339 -21.7339 -22.2339 -22.7339 -23.2339 -23.7339 -24.2339 www.sipatsaw.com Frequency Response Type Performance -11.7339 -21.7339 -31.7339 -41.7339 Magnitude(dB) -51.7339 -61.7339 -71.7339 -81.7339 -91.7339 -101.7339 -111.7339 SIPAT Co., Ltd. 60 65 70 75 80 85 90 Frequency(MHz) 95 100 105 78 80 82 84 86 Frequency(MHz) 88 90 92 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±MHz) Type Performance 2100 2000 Phase Linearity(f0±MHz) Type Performance 10 5 1900 Group Delay Time(ns) 1800 1700 1600 1500 1400 1300 X: 80 Y: 1565 X: 84.5 Y: 1629 X: 84.5 Y: 1.451 X: 89 Y: 1.331 0 Degree(deg) X: 80 Y: -4.561 X: 89 Y: 1587 -5 -10 -15 -20 1200 80 82 84 86 Frequency(MHz) 88 90 80 82 84 86 Frequency(MHz) 88 90 Horizontal: 2MHz/Div Vertical:100 ns/Div Horizontal: 2MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT08506 2011-12-12 1.0 Page 3/3 Phone: Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62808382 Fax: +86-23-62805284 www.sipatsaw.com / sales@sipat.com www.sipatsaw.com / sawmkt@sipat.com