LBT10014

China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5MHz Bandwidth Part Number: LBT10014 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±7MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 99.85 5.15 50 Typical 100 23.2 5.05 5.2 5.98 6.06 6.09 0.8 4 54 -1.8 112LT 25 0 Maximum 100.15 30 6.05 6.4 7.2 1.5 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT10014 2010-09-26 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5MHz Bandwidth Part Number: LBT10014 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω L1 L2 OUTPUT 50Ω L1=39nH L2=56nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBT10040 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT10014: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT10014 2010-09-26 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5MHz Bandwidth Part Number: LBT10014 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -13.178 -23.178 -33.178 -22.678 -21.678 Passband Response Type Performance -22.178 -43.178 Magnitude(dB) Amplitude ripple(dB) -53.178 -63.178 -73.178 -83.178 -23.178 -23.678 -24.178 -24.678 -93.178 -103.178 -113.178 85 -25.178 90 95 100 Frequency(MHz) 105 110 115 -25.678 94 96 98 100 Frequency(MHz) 102 104 106 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±2.5MHz) Type Performance 4800 20 4600 15 Phase Linearity(f0±2.5MHz) Type Performance 4400 10 Group Delay Time(ns) 4200 X: 100 Y: 4067 X: 97.49 Y: 3947 X: 102.5 Y: 3978 5 Degree(deg) X: 100 Y: -0.7324 X: 102.5 Y: 2.496 X: 97.49 Y: -1.893 4000 0 -5 3800 -10 3600 -15 3400 -20 3200 95 96 97 98 99 100 Frequency(MHz) 101 102 103 104 105 -25 95 96 97 98 99 100 Frequency(MHz) 101 102 103 104 105 Horizontal: 1MHz/Div Vertical: 200ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT10014 2010-09-26 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com