LBT10015

China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT10015 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3dB Bandwidth 30dB Bandwidth 45dB Bandwidth 50dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±7.5MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 99.85 5.05 - Typical 100 22.5 5.08 5.75 5.88 5.91 Maximum 100.15 26 5.8 6.2 6.8 1.2 4.5 - 50 0.9 4.2 55 -1.8 112°LT 25 -25 -45 0 +85 +105 - 1A DIP3512 (35*12.6*5.2mm3) 10 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT10015 2011-12-12 1.0 Page 1/3 Phone:Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT10015 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration 手动测试座 L1=47nH L2=47nH C1=C2=47pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBT10015 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT10015: Part Number 3)XXYY: Date Code 4) ZZ: Identified Code 4.70 0.50 4.50 0.50 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Phone:Tel: +86-23-62808818 +86-23-62920684 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT10015 2011-12-12 1.0 Page 2/3 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT10015 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -12.5489 -22.5489 -32.5489 -42.5489 -52.5489 -62.5489 -72.5489 -82.5489 -92.5489 -102.5489 -112.5489 85 Amplitude ripple(dB) -20.0489 -20.5489 -21.0489 -21.5489 -22.0489 -22.5489 -23.0489 -23.5489 -24.0489 -24.5489 -25.0489 Passband Respond Type Performance Magnitude(dB) 90 95 100 105 Frequency(MHz) 110 115 96 97 98 99 100 101 Frequency(MHz) 102 103 104 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation Type Performance 5000 4800 4600 5 10 Phase Linearity Type Performance Group Delay Time(ns) X: 102.7 Y: 7.192 X: 100 Y: -0.4054 4400 4200 4000 3800 X: 97.3 Y: 4089 Degree(deg) X: 100 Y: 4223 X: 102.7 Y: 4186 0 -5 X: 97.3 Y: -7.647 -10 3600 3400 97 98 99 100 Frequency(MHz) 101 102 103 -15 97 98 99 100 101 Frequency(MHz) 102 103 Horizontal: 1MHz/Div Vertical: 200ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT10015 2011-12-12 1.0 Page 3/3 Phone:Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com