LBT10103

China Electronics Technology Group Corporation No.26 Research Institute 101.3MHz IF SAW Filter 5MHz Bandwidth Part Number: LBT10103 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth 55 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±15MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 101.15 5 55 Typical 101.3 24 5.06 5.19 5.78 5.82 5.85 5.88 5.91 1.2 4.66 68 -1.82 112LT 25 Maximum 101.45 25 5.8 6.2 7 15 1.5 4.8 - -40 -45 0 +85 +105 - 1 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT10103 2007-09-17 1.0 Page 1/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 101.3MHz IF SAW Filter 5MHz Bandwidth Part Number: LBT10103 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=L4=47nH INPUT 50Ω L1 L4 OUTPUT 50Ω L2=L3=39nH Source/Load Impedance=50 ohm L2 L3 Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 Pad Configuration: SIPAT LBT10103 07XX Input Output 1 5 12.80 0.5 4.7 4.5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT10103: Part Number 3) 07XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBT10103 2007-09-17 1.0 Page 2/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 101.3MHz IF SAW Filter 5MHz Bandwidth Part Number: LBT10103 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -14.0752 -23.0752 Passband Respond -24.0752 -34.0752 -44.0752 -54.0752 Magnitude(dB) -64.0752 3dB CF = 101.334MHz 1.5dB = 5.0585MHz 3dB = 5.1942MHz 35dB = 5.7787MHz 40dB = 5.8166MHz 45dB = 5.8467MHz 50dB = 5.8767MHz 55dB = 5.9053MHz Insert Loss = -24.0752dB Passband Ripple = 1.2158dB Ultimate Rejection = 54.9661dB Group Delay = 133.8822ns Phase Linearity = 17.3734deg Delay = 4.6565us -23.5752 -24.0752 -24.5752 -25.0752 -74.0752 -84.0752 -25.5752 -94.0752 -26.0752 -104.0752 -114.0752 90 95 100 Frequency(MHz) 105 110 115 97 98 99 100 101 102 103 104 105 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±2.5MHz) Type Performance 5000 40 Phase Linearity(f0±2.5MHz) Type Performance 4900 30 4800 20 X: 103.8 Y: 8.257 4700 Group Delay Time(ns) X: 101.3 Y: 4677 10 X: 98.79 Y: -1.412 X: 101.3 Y: -1.224 0 Degree(deg) 105 106 4600 X: 98.79 Y: 4553 X: 103.8 Y: 4558 -10 4500 -20 4400 -30 4300 -40 4200 -50 4100 97 98 99 100 101 102 Frequency(MHz) 103 104 -60 97 98 99 100 101 102 Frequency(MHz) 103 104 105 106 Horizontal: 1MHz/Div Vertical: 100ns/Div Horizontal: 1MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT10103 2007-09-17 1.0 Page 3/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com