LBT11201

China Electronics Technology Group Corporation No.26 Research Institute 112.3MHz SAW Filter 9MHz Bandwidth Part Number: LBT11201 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±10MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz dB usec dB KHz/°C °C °C V dBm - Minimum 112.2 8.7 50 Typical 112.3 26.4 8.63 8.76 9.44 9.47 9.5 9.54 0.9 4.2 62 -2.0 112LT 25 Maximum 112.4 30 9.55 1.5 4.5 - -25 0 +85 - 1A 10 DIP3512 (35.0x12.8x4.7) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT11201 2011-09-14 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 112.3MHz SAW Filter 9MHz Bandwidth Part Number: LBT11201 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50 L1 OUTPUT 50 L2 Notes - Component values may change depending on board layout. L1=27nH L2=56nH 1 5 Source/Load Impedance=50 ohm Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBT11201 XXYYZZ Pad Configuration: Input Output 1 5 Ground 2,3,4,6 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT11201: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT11201 2011-09-14 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 112.3MHz SAW Filter 9MHz Bandwidth Part Number: LBT11201 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -16.3687 -26.3687 -36.3687 -25.8687 -24.8687 Passband Response Type Performance -25.3687 -46.3687 Magnitude(dB) Amplitude ripple(dB) -56.3687 -66.3687 -76.3687 -86.3687 -26.3687 -26.8687 -27.3687 -27.8687 -96.3687 -106.3687 -116.3687 -28.3687 -28.8687 90 95 100 105 110 115 120 Frequency(MHz) 125 130 135 104 106 108 110 112 114 Frequency(MHz) 116 118 120 122 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4MHz) Type Performance 4600 25 Phase Linearity(f0±4MHz) Type Performance 20 4500 15 4400 10 Group Delay Time(ns) 4300 X: 108.3 Y: 4196 5 X: 112.3 Y: 4230 X: 116.3 Y: 4211 X: 112.3 Y: -0.1043 X: 116.3 Y: 2.84 Degree(deg) 0 4200 X: 108.3 Y: -3.312 -5 4100 -10 -15 4000 -20 3900 -25 3800 108 110 112 Frequency(MHz) 114 116 118 -30 108 110 112 Frequency(MHz) 114 116 118 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT11201 2011-09-14 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com