LBT11567

China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBT11567 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.2 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation Group Delay Variation(f0±4.5MHz) Absolute Delay f0±5.2MHz f0±6MHz Ultimate Rejection f0±10MHz f0±15MHz Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB nsec usec dB dB dB dB KHz/°C °C V dBm - Minimum 114.9 9.2 30 40 40 40 Typical 115 25.7 9.37 9.57 10.36 0.9 110 2.24 31 41 44 45 -2.07 112LT 25 0 Maximum 115.1 28 10.4 1.2 200 2.4 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT11567 2011-03-29 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBT11567 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=68nH OUTPUT 50Ω C1 L2=56nH INPUT 50Ω C1=33pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBT11567 XXYYZZ Input Output 1 5 Ground 2,3,4,6 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT11567: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT11567 2011-03-29 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 115MHz SAW Filter 9MHz Bandwidth Part Number: LBT11567 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -15.6841 -24.1841 Passband Response Type Performance -25.6841 -24.6841 -35.6841 -25.1841 -45.6841 -25.6841 Amplitude ripple(dB) 95 100 105 110 115 Frequency(MHz) 120 125 130 135 140 -55.6841 Magnitude(dB) -65.6841 -26.1841 -75.6841 -26.6841 -85.6841 -27.1841 -95.6841 -27.6841 -105.6841 -115.6841 90 -28.1841 105 110 115 Frequency(MHz) 120 125 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±4.5MHz) Type Performance 20 2800 15 Phase Linearity(f0±4.5MHz) Type Performance 2600 10 Group Delay Time(ns) 2400 X: 119.5 Y: 2240 5 Degree(deg) X: 110.5 Y: 2259 X: 115 Y: 2255 X: 110.5 Y: 2.083 X: 115 Y: 1.312 X: 119.5 Y: 2.808 0 2200 -5 2000 -10 1800 -15 1600 108 110 112 114 116 Frequency(MHz) 118 120 122 -20 108 110 112 114 116 Frequency(MHz) 118 120 122 Horizontal: 2MHz/Div Vertical: 200ns/Div Horizontal: 2MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT11567 2011-03-29 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com