LBT12043

China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBT12043 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 20 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±12.5MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 119.85 15 50 Typical 120 28.2 15.04 15.19 15.7 15.96 1 3.8 51 -2.16 112LT 25 0 Maximum 120.15 32 15.8 1.5 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT12043 2011-03-24 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBT12043 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω L1 L2 OUTPUT 50Ω L1=39nH L2=33nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBT12043 XXYYZZ Input Output 1 5 Ground 2,3,4,6 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT12043: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT12043 2011-03-24 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 120MHz SAW Filter 15MHz Bandwidth Part Number: LBT12043 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -18.2492 -28.2492 -38.2492 -27.7492 -26.7492 Passband Response Type Performance -27.2492 -48.2492 Magnitude(dB) Amplitude ripple(dB) -58.2492 -68.2492 -78.2492 -88.2492 -28.2492 -28.7492 -29.2492 -29.7492 -98.2492 -108.2492 -118.2492 70 -30.2492 80 90 100 110 120 130 Frequency(MHz) 140 150 160 170 -30.7492 105 110 115 120 Frequency(MHz) 125 130 135 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±7MHz) Type Performance 4000 30 3950 Phase Linearity(f0±7MHz) Type Performance 3900 20 3850 X: 120 Y: 3801 10 X: 127 Y: 3786 X: 127 Y: 3.986 X: 113 Y: 0.2475 Group Delay Time(ns) 3800 X: 113 Y: 3745 Degree(deg) 0 X: 120 Y: -1.548 3750 3700 -10 3650 -20 3600 -30 3550 3500 110 115 120 Frequency(MHz) 125 130 -40 110 115 120 Frequency(MHz) 125 130 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT12043 2011-03-24 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com