LBT13010

China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 15MHz Bandwidth Part Number: LBT13010 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±17MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz dB usec dB KHz/°C °C V dBm - Minimum 129.85 15.15 50 Typical 130 29.3 15 15.19 15.93 16 16.04 0.7 4.4 59 -2.3 112LT 25 0 Maximum 130.15 35 16.05 16.4 17.2 1.5 - - 1A 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT13010 2010-09-26 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 15MHz Bandwidth Part Number: LBT13010 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω L1 L2 OUTPUT 50Ω C1 L1=33nH L2=47nH C1=39pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBT13010 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT13010: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT13010 2010-09-26 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 15MHz Bandwidth Part Number: LBT13010 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -19.2798 -29.2798 -39.2798 -28.7798 -27.7798 Passband Response Type Performance -28.2798 -49.2798 Magnitude(dB) Amplitude ripple(dB) -59.2798 -69.2798 -79.2798 -89.2798 -29.2798 -29.7798 -30.2798 -30.7798 -99.2798 -109.2798 -119.2798 105 -31.2798 110 115 120 125 130 135 Frequency(MHz) 140 145 150 155 -31.7798 110 115 120 125 130 Frequency(MHz) 135 140 145 150 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±7.5MHz) Type Performance 4700 25 Phase Linearity(f0±7.5MHz) Type Performance 20 4600 15 4500 10 X: 137.5 Y: 4.739 Group Delay Time(ns) X: 130 Y: 4396 5 X: 137.5 Y: 4370 X: 122.5 Y: -2.056 X: 130 Y: 0.08263 Degree(deg) 140 4400 X: 122.5 Y: 4340 0 -5 4300 -10 4200 -15 -20 4100 -25 4000 120 125 130 Frequency(MHz) 135 -30 115 120 125 130 Frequency(MHz) 135 140 145 Horizontal: 5MHz/Div Vertical: 100ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT13010 2010-09-26 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com