LBT13012

China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT13012 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3dB Bandwidth 30dB Bandwidth 45dB Bandwidth 50dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±7.5MHz) Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 129.85 5.05 - Typical 130 23.3 5.08 5.77 5.92 5.98 Maximum 130.15 26 5.8 6.2 6.8 1.2 4.5 - 50 0.8 3.91 56 -2.34 112°LT 25 -25 -45 0 +85 +105 - 1A DIP3512 (35*12.6*5.2mm3) 10 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT13012 2011-12-12 1.0 Page 1/3 Phone:Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT13012 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration 手动测试座 L1=27nH C1=36 pF L2=27nH C2=36pF Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 12.80 0.50 SIPAT LBT13012 XXYYZZ Pad Configuration: Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT13012: Part Number 3)XXYY: Date Code 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Phone:Tel: +86-23-62808818 +86-23-62920684 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBT13012 2011-12-12 1.0 Page 2/3 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 130MHz SAW Filter 5.1MHz Bandwidth Part Number: LBT13012 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -13.2615 -23.2615 -33.2615 -43.2615 -53.2615 -63.2615 -73.2615 -83.2615 -93.2615 -103.2615 -113.2615 115 Amplitude ripple(dB) -20.7615 -21.2615 -21.7615 -22.2615 -22.7615 -23.2615 -23.7615 -24.2615 -24.7615 -25.2615 -25.7615 Passband Respond Type Performance Magnitude(dB) 120 125 130 135 Frequency(MHz) 140 145 126 127 128 129 130 131 Frequency(MHz) 132 133 134 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation Type Performance 15 Phase Linearity Type Performance 4600 4400 10 Group Delay Time(ns) 4200 Degree(deg) 4000 3800 3600 3400 3200 3000 127 X: 130 Y: 3927 X: 127.4 Y: 3767 X: 132.6 Y: 3890 5 X: 132.6 Y: 4.212 0 X: 130 Y: -1.819 -5 X: 127.4 Y: -8.567 128 129 130 131 Frequency(MHz) 132 133 128 129 130 131 Frequency(MHz) 132 133 Horizontal: 1MHz/Div Vertical: 200ns/Div Horizontal: 1MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Part Number Rev. Date Ver. LBT13012 2011-12-12 1.0 Page 3/3 Phone:Tel: +86-23-62808818 +86-23-62920684 Fax: +86-23-62805284 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com www.sipatsaw.com / sawmkt@sipat.com