LBT16053

China Electronics Technology Group Corporation No.26 Research Institute 160MHz SAW Filter 8MHz Bandwidth Part Number: LBT16053 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 3dB Bandwidth 30 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 159.8 7.7 45 Typical 160 26.2 7.78 8.53 8.63 0.8 3.42 49 -2.88 112LT 25 Maximum 160.2 28 8.8 1 3.5 - -40 -45 0 +85 +105 - 1A 10 DIP2712 (27.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT16053 2008-10-20 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 160MHz SAW Filter 8MHz Bandwidth Part Number: LBT16053 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1 L2 L1=L2=39nH OUTPUT 50Ω C2 Notes - Component values may change depending on board layout. INPUT 50Ω C1 C1=C2=27pF Source/Load Impedance=50 ohm Package Dimension 27.00 0.5 Pad Configuration: SIPAT LBT16053 XXYYZZ Input Output 1 5 12.80 0.5 4.7 4.5 Ground All Others Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT16053: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP2712 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 17.70 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBT16053 2008-10-20 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 160MHz SAW Filter 8MHz Bandwidth Part Number: LBT16053 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -16.2296 -26.2296 -36.2296 -25.7296 -24.7296 Passband Respond Type Performance -25.2296 -46.2296 Magnitude(dB) Amplitude ripple(dB) -56.2296 -66.2296 -76.2296 -86.2296 -26.2296 -26.7296 -27.2296 -27.7296 -96.2296 -106.2296 -116.2296 145 -28.2296 150 155 160 Frequency(MHz) 165 170 175 -28.7296 152 154 156 158 160 Frequency(MHz) 162 164 166 168 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 2MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±3.5MHz) Type Performance 3800 40 Phase Linearity(f0±3.5MHz) Type Performance 3700 30 3600 20 3500 Group Delay Time(ns) X: 156.5 Y: 3414 X: 160 Y: 3450 10 X: 163.5 Y: 3419 X: 156.5 Y: 0.8318 X: 163.5 Y: 2.844 X: 160 Y: -1.721 3300 Degree(deg) 156 158 160 Frequency(MHz) 162 164 166 3400 0 -10 3200 -20 3100 -30 3000 -40 2900 154 -50 154 156 158 160 Frequency(MHz) 162 164 166 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBT16053 2008-10-20 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sawmkt@sipat.com