SP83701

China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. 1. Package Dimension ( S22 ) 3.00±0.10 1.50 6 Pin No. Function 1. Ground 2. 3. 4. 5. 6. Signal Ground Ground Signal Ground 2. Marking 83701 Part Number (1) Ink Marking or Laser Marking (2) 01: Model code (3) ·: Pin 1 Identifier (4) C5: Date code Phone: +86-23-62808818 1 1 6 3.00±0.13 83701 . 1.6 0.60 5 2 3 2 5 C5 4 3 1.5MAX 4 1.30 0.90±0.08 Unit: mm ·C5 C Month code 5 Last figure of year Month Month code 1 A 2 B 3 C 4 D 5 E 6 F 7 G 8 H 9 I 10 J 11 K 12 L e.g.: “ C5” means May of 2005 SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 1/8 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. 3. Performance 3.1 Application RF SAW filter for cellular telephone. Center frequency: 836.5MHz 3.2 Maximum Rating Operation Temperature Range Storage Temperature Range DC Permissive Voltage Maximum Input Power -30℃ to +80℃ -40℃ to +85℃ 10V DC max. 23 dBm 3.3 Electronic Characteristics Item Center Frequency (fo) Pass-band Width Insertion Loss Pass-band Ripple Return Loss Stop-band Attenuation Frequency (MHz) 836.5 25 824 ~ 849 824 ~ 849 824 ~ 849 DC ~ 800 869 ~ 894 978 ~ 1006 1050 ~ 2600 Specification 2.5 dB max. 1.5 dB max. 10.0 dB min. 20 dB min. 30 dB min. 25 dB min. 20 dB min. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 2/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. 3.4 Frequency Characteristics 3.5 Test Circuit I/O Input from 50 ohm Network Analyzer SIGNAL GROUND all ground pins I/O Output to 50 ohm Network Analyzer SIGNAL GROUND SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 3/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. 4. Reliability 4.1 Mechanical Shock: The components shall remain within the electrical specifications after three one-half sine shock pulses(3000g’s for 0.3 ms) in each direction(for six total) along each of the three mutually perpendicular axes for a total of 18 shocks. 4.2 Vibration Fatigue: The components shall remain within the electrical specifications after loaded vibration at 20~55Hz, amplitude 1.5mm, X,Y,Z, direction, for 2 hours. 4.3 Leak Test 4.3.1 Gross Leak Test: Submerge samples into at +85℃ water for at least 1 minute. Carefully observe the samples. No bubbles should be seen. 4.3.2 Fine Leak Test: Expose samples for testing to 60 PSIG Helium gas for 2 hours. Then transfer the same samples to another chamber and draw a vacuum. Measure the leak rate. Failure is defined if the leak rate exceeds 5×10-8 atm cc/sec Helium. 4.4 High Temperature Storage: The components shall remain within the electrical specifications after being kept at the 85℃±2℃for 960 hours, then kept at room temperature for 2 hours. 4.5 Low Temperature Storage: The components shall remain within the electrical specifications after being kept at the –40℃±2℃for 960 hours, then kept at room temperature for 2 hours. 4.6 Temperature Cycle: The components shall remain within the electrical specification after 32 cycles of high and low temperature testing (one cycle: 80℃ for 30 minutes → 25℃ for 20 seconds → -40℃ for 30 minutes) than kept at room temperature for 2 hours. 4.7 Humidity Test: The components shall remain within the electrical specifications after being kept at the condition of ambient temperature 70℃, and 90~95% RH for 240 hours, then kept at room temperature and normal humidity for 4 hours. 4.8 Solder-heat Resistance: The components shall remain within the electrical specifications after dipped in the solder at 260℃±5℃ for 10 to 11 seconds, then kept at room temperature for 10 minutes. 4.9 Solderability: Solderability of terminal shall be kept at more than 80% after dipped in the solder flux at 230℃±5℃ for 5±1 seconds. 4.10 Storage: The components shall meet the electrical and mechanical specifications after 5 years storage, if stored within the temperature range of -40℃~+85℃ and in the humidity of 20 to 60% r.h. 5. Remarks 5.1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the component. Please avoid static voltage. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 4/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. 5.2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the component. Please avoid ultrasonic cleaning. 5.3 Soldering Only leads of component may be soldered. Please avoid soldering another part of component. 6. Packing 6.1 Dimensions (1) Carrier Tape: Figure 1 (2) Reel: Figure 2 (3) The product shall be packed properly not to be damaged during transportation and storage. 6.2 Reeling Quantity 3,000pcs/reel 6.3 Taping Structure (1) The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE CARRIER TAPE (2)Lable Device Name Type Quantity Lot No. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 5/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. (2) Leader part and vacant position specifications. Vacant Components Contained Vacant Leader Part TAPE RUNNING DIRECTION 7. Tape Specifications 7.1 Tensile Strength of Carrier Tape: 4.4N/mm width 7.2 Top Cover Tape Adhesion (See the below figure) (1) pull off angle: 0~15° (2) speed: 300mm/min. (3) force: 20~70g TOP COVER TAPE Direction of pull off CARRIER TAPE SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 6/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. [Figure 1] Carrier Tape Dimensions Tape Running Direction [Unit: mm] W 12.0 ±0.3 F 5.5 ±0.1 E 1.75 ±0.1 P0 4.0 ±0.2 P1 4.0 ±0.1 P2 2.0 ±0.2 D0 Φ1.5 ±0.1 D1 Φ1.5 ±0.25 t1 0.31 max. t2 1.95 max. A 3.3 max. B 3.3 max. [Figure 2] Reel Dimensions [Unit: mm] SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 7/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 836.5MHz RF SAW Filter 25MHz Bandwidth Part Number: SP83701 www.sipatsaw.com SIPAT Co., Ltd. [Figure 3] Part Direction 83701 83701 . C5 . C5 Tape Running Direction SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. SP83701 2006-8-9 1.0 Page 8/8 Phone: +86-23-62808818 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com