SP1086V-L-3-3

Solved by SP1086 TM 1.5A Low Dropout Linear Regulator Features Low Dropout Voltage: Typical 1.3V at 1.5A Current Limiting and Thermal Protection Output Current: 1.5A Current Limit: 2.3A Operating Junction Temperature: 0 to 125oC Line Regulation: 0.015% (Typical) Load Regulation: 0.1% (Typical) Available in RoHS Compliant, Lead Free Packaging TO-220 3 2 1 INPUT OUTPUT ADJ/GND Applications High Efficiency Linear Regulators Battery Charger Post Regulation for Switching Supply Microprocessor Supply Motherboard Power Supply Cable and ADSL Modem DVD-Video Player Telecom Equipment Set Top Boxes and Web Boxes Modules' Supply general Description The SP1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 1.5A of load current. The series features on-chip thermal shutdown. It also includes a bandgap reference and a current limiting circuit. The SP1086 is available in 1.5V, 1.8V, 2.5V, 3V, 3.3V, and 5.0V versions. The fixed versions integrate the adjust resistors. It is also available in an adjustable version, which can set the output voltage with only two external resistors. The SP1086 series is available in standard packages of TO-263-3, TO-220 , and TO-252. TO-263-3 TO-220 TO-252 Figure . Package Types of SP086 Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation  Pin configuration V Package (TO-220) 3 2 1 INPUT OUTPUT ADJ/GND V1 Package (TO-263-3) 3 2 1 INPUT OUTPUT ADJ/GND V2 Package (TO-252) 3 2 INPUT OUTPUT ADJ/GND 1 Figure 2. Pin Configuration of SP086 (Top View) Functional Block Diagram  INPUT Thermal Protection + 2 OUTPUT A B A2 For Adjustable Output, disconnect A and A2, connect B For Fixed Output, connect A and A2, disconnect B  ADJ/ GND Figure . Functional Block Diagram of SP086 Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 2 electrical characteristics (Typical and limits apply for TJ=25oC unless otherwise noted.) Parameter Reference Voltage 0.5% 1% Test Symbol Circuit 4 4 Conditions Min 1.234 1.228 Typ 1.240 1.240 2 3 -0.5 Max 1.246 1.252 10 10 -1.5 Unit V mV mV/V A A A A VREF VKA=VREF, IKA=10mA VREF VKA=VREF IKA=10mA 0oC to 70oC -40oC to 85oC Deviation of Reference Voltage Over-Temperature Ratio of Change in VREF to the Change in Cathode Voltage Reference Input Current Deviation of Reference Current Over Full Temperature Range Minimum Cathode Current for Regulation Off-State Cathode Current Dynamic Impedance 5 5 5 4 6 4 VREF IKA=10mA, VKA VKA:VREF to 16V IREF IREF IKA=10mA, R1=10K , R2= IKA=10mA, R1=10K , R2= TA=-40 to 85oC 0.15 0.1 55 0.04 0.01 0.05 0.4 0.4 80 0.10 0.05 0.15 IKA VKA=VREF (MIN) IKA VREF=0, VKA=18V (OFF) VKA=6, VREF=0 ZKA VKA=VREF, IKA=1 to 100mA f 1.0kHz Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation  1.5A LOW DROPOUT LINEAR REGULATOR electrical characteristics Parameter Reference Voltage Symbol VREF Typicals and limits appearing in normal type apply for TJ = 25oC. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0oC to 125oC. (PD maximum power dissipation, see Note 2.) Conditions SP1086-ADJ, IOUT = 10mA, VIN -VOUT = 2V, TJ = 25oC, 10mA IOUT 1.5A, 1.4V VIN - VOUT 6V SP1086-1.5, IOUT =10mA, VIN = 3.5V, TJ = 25oC, 10mA IOUT 1.5A, 3V VIN 10V SP1086-1.8, IOUT = 10mA, VIN = 3.8V, TJ = 25oC, 10mA IOUT 5A, 3.2V VIN 10V Output Voltage VOUT SP1086-2.5, IOUT = 10mA, VIN = 4.5V, TJ = 25oC, 10mA IOUT 1.5A, 3.9V VIN 10V SP1086-3.0, IOUT = 10mA, VIN = 4.5V, TJ = 25oC, 10mA IOUT 1.5A, 4.9V VIN 10V SP1086-3.3, IOUT = 10mA, VIN = 5V, TJ = 25oC, 10mA IOUT 1.5A, 4.75V VIN 10V SP1086-5.0, IOUT = 10mA, VIN = 7V, TJ = 25oC, 10mA IOUT 1.5A, 6.5V VIN 10V SP1086-ADJ, SP1086-1.5, SP1086-1.8, SP1086-2.5, SP1086-3.0, SP1086-3.3, SP1086-5.0, IOUT = 10mA, 1.5V VIN - VOUT IOUT = 10mA, 1.5V VIN - VOUT IOUT = 10mA, 1.5V VIN - VOUT 10V 10V 10V Min 1.238 1.225 1.485 1.47 1.782 1.746 2.475 2.45 2.97 2.94 3.267 3.235 4.95 4.9 Typ 1.250 1.250 1.5 1.5 1.8 1.8 2.5 2.5 3.0 3.0 3.3 3.3 5 5 0.015 0.035 0.3 0.6 0.3 0.6 0.3 0.6 0.3 0.6 0.5 1 0.5 1 Max 1.262 1.270 1.515 1.53 1.818 1.854 2.525 2.55 3.03 3.06 3.333 3.365 5.05 5.1 0.2 0.2 6 6 6 6 6 6 6 6 10 10 10 10 Unit V V V V V V V % mV mV mV mV mV mV Line Regulation VOUT IOUT = 10mA, 1.5V VIN - VOUT 10V IOUT = 10mA, 1.5V VIN - VOUT 10V IOUT = 10mA, 1.5V VIN - VOUT IOUT = 10mA, 1.5V VIN - VOUT 10V 10V Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation  electrical characteristics (continued) Parameter Symbol Conditions SP1086-ADJ, SP1086-1.5, SP1086-1.8, SP1086-2.5, SP1086-3.0, SP1086-3.3, SP1086-5.0, Dropout Voltage Current Limit Minimum Load Current Quiescent Current Ripple Rejection Adjust Pin Current Adjust Pin Current Change Temperature Stability RMS Noise (% of VOUT) Thermal Shutdown Thermal Shutdown Hysteresis Thermal Resistance Junction-to-Case JC Min 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V 10mA IOUT 1.5A, VIN - VOUT = 2V Typ 0.1 0.2 3 6 3 6 3 6 3 7 3 7 5 10 1.3 Max 0.3 0.4 12 20 12 20 12 20 15 20 15 20 20 35 1.5 Unit % mV mV mV mV mV mV V A mA mA dB Load Regulation VOUT IO = 1.5A, VREF = 1% ILIMIT VIN - VOUT = 2V, 1.4V VIN - VOUT 10V (For ADJ) 1.5 2.3 2 5 5 10 VIN = VOUT + 1.3V fRIPPLE = 120Hz, COUT = 25 F Tantalum, IOUT = 1.5A, VIN - VOUT = 3V 60 75 60 120 5 A A % % o o o 10mA IOUT 5A, 1.4V VIN -VOUT 10V 0.2 0.5 TA = 25oC, 10Hz f 10kHz 0.003 165 30 Junction Temperature C C TO - 252 TO - 263 TO - 220 4 4 4 C/W Note 2: Maximum power dissipation see Figure 5. Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 5 Typical Performance characteristics .0 0.0 .5 Output Voltage (V) 7.5 .0 Power (W) .25 5.0 .20 2.5 .5 .0 0 25 50 75 o 00 25 0.0 25 50 75 00 o 25 Ambient Temperature ( C) Case Temperature ( C) Figure . Output Voltage vs. Temperature Figure 5. Maximum Power Dissipation .260 .255 . .2 Reference Voltage (V) .250 . TA=0 C o Dropout Voltage (V) .25 .20 .25 .20 .225 .220 .0 TA=25 C 0.8 0.7 0.6 0.5 0. 0.2 0. 0. 0.5 0.6 0.7 0.8 0. .0 . .2 . . .5 o 0.  0 25 50 75 o 00 25 Ambient Temperature ( C) Output Current (A) Figure 6. Reference Voltage vs. Temperature Figure 7. Dropout Voltage vs. Output Current Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 6 Typical Performance characteristics (continued) 2.25 00 0 Short Circuit Current (A) Adjust Pin Current (uA) 2.00 80 70 60 50 0 0 20 0 .75 .50 .25 .00 0 25 50 75 o 00 25 0 0 25 50 75 o 00 25 Ambient Temperature ( C) Ambient Temperature ( C) Figure 8. Short Circuit Current vs. Temperature Figure . Adjust Pin Current vs. Temperature 5 80 Minimum Load Current (mA) Ripple Rejection (dB)  70 60  50 2 0  0 0 0 25 50 75 o 00 25 20 0 00 k 0k 00k Ambient Temperature ( C) Frequency (Hz) Figure 0. Minimum Load Current vs. Temperature Figure . Ripple Rejection vs. Frequency Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 7 Typical Performance characteristics (continued) VOUT VOUT iO=0.75A Vin iO=0.1A SP1086V Load transient response Vin=4.8V, VOUT=3.3V, iO=0.1A to 0.75A, cin=cOUT=10 (tan) SP1086V Line transient response Vin=4.8V, VOUT=3.3V, iO=0.1A, cin=1 (tan), cOUT=10 (tan) Figure 2. Load Transient Response Figure  . Line Transient Response Typical Application VIN 10 F Tantalum + SP1086-ADJ VOUT VIN ADJ R1 120 VOUT + 22 F Tantalum VOUT=VREF* (+R2/R) + IADJ * R2 R2 VIN 10 F Tantalum SP1086-5.0 + VIN GND VOUT VOUT + 22 F Tantalum Figure . Typical Applications of SP086 Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 8 PAckAge:3 Pin TO-263 Mechanical Dimensions TO-263-3 Unit: mm(inch) .070(0.60) .820(0.0)  .650(0.80) 0.20(0.05) 8.80(0.8) 70 .270(0.050) .0(0.055) .50(0.05) .0(0.055) 7 7.20(0.22) 8.60(0.0) .650(0.80) 0.020(0.00) 0.250(0.00) .760(0.58) 5.70(0.620) .50(0.05) .0(0.055) 0.50(0.020) 0.0(0.0) 2.50(0.00) 2.50(0.00) 2.0(0.0) 2.60(0.06)  2.60(0.0) 2.700(0.06) 0.60(0.0) 0.00(0.06) 7 2.200(0.087) 2 8 5.600(0.220) 7.80(0.) 0.80(0.05) 0 6 2.50(0.00) 2.50(0.00) Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation  PAckAge: 3 Pin TO-220 Mechanical Dimensions (continued) TO-220 Unit: mm(inch) .660(0.80) 0.660(0.20) .560(0.0) .060(0.60) 2.580(0.02) .80(0.) 0.550(0.022) .50(0.05) .850(0.07) 0.200(0.008) .20(0.560) 6.50(0.650) 7 .500(0.05) 8.520(0.5) .520(0.75) 27.880(.08) 0.280(.2)  .560(0.0) .820(0.0) 2.080(0.082) 2.880(0.) 7 .60(0.06) .760(0.06) 60 0.8(0.02) 0.8(0.05) 8.76(0.5) 60 0.8(0.05) 2.50(0.00) 2.50(0.00) 0.56(0.0) 0.06(0.06) Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 0 PAckAge: 3 Pin TO-252 Mechanical Dimensions (continued) TO-252 Unit: mm(inch) 5.20(0.206) 5.0(0.2) 6.80(0.25) 6.680(0.26) 0.60(0.08) 0.580(0.02) 2.80(0.086) 2.80(0.0) 0.00(0.06) 5 .500(0.7) 0.00(0.8) 0.650(0.026) 0.50(0.07) 0.80(0.0) 0.50(0.02) 0.020(0.00) 0.20(0.005) 5 0.750(0.00) 0.850(0.0) .00(0.055) .760(0.06) 5 0.600(0.02) 2.600(0.02) .000(0.8) 2.20(0.088) 2.0(0.02) 0.60(0.025) 0.780(0.0) 2.20(0.088) 2.0(0.02)  7 0.50(0.020) 2.0 .0 2.0 .0 Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator 5.60(0.2) 5.560(0.2) .080(0.0) .20(0.052) 8 © 2006 Sipex Corporation  ORDeRing inFORMATiOn SP1086 /TR: Tape and Reel Blank: Tube Part Number Package V2: TO-252 V: TO-220 V1: TO-263-3 ADJ: Adjustable Output 1.5: Fixed Output 1.5V 1.8: Fixed Output 1.8V 2.5: Fixed Output 2.5V 3.0: Fixed Output 3.0V 3.3: Fixed Output 3.3V 5.0: Fixed Output 5.0V -L: Lead Free and RoHS Compliant Part number SP086V2-L/TR SP086V2-L--5/TR SP086V2-L--8/TR SP086V2-L-2-5/TR SP086V2-L--0/TR SP086V2-L--/TR SP086V2-L-5-0/TR SP086V-L/TR SP086V-L--5/TR SP086V-L--8/TR SP086V-L-2-5/TR SP086V-L--0/TR SP086V-L--/TR SP086V-L-5-0T/R SP086V-L SP086V-L--5 SP086V-L--8 SP086V-L-2-5 SP086V-L--0 SP086V-L-- SP086V-L-5-0 Solved by Voltage Temperature Pin Package Pack Qty Range Range count Adj .5V .8V 2.5V V .V 5V Adj .5V .8V 2.5V V .V 5V Adj .5V .8V 2.5V V .V 5V 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC 0ºC to +25ºC TO-252 TO-252 TO-252 TO-252 TO-252 TO-252 TO-252 TO-26 TO-26 TO-26 TO-26 TO-26 TO-26 TO-26 TO-220 TO-220 TO-220 TO-220 TO-220 TO-220 TO-220                      2,500/TR 2,500/TR 2,500/TR 2,500/TR 2,500/TR 2,500/TR 2,500/TR 800/TR 800/TR 800/TR 800/TR 800/TR 800/TR 800/TR 50/TUBE 50/TUBE 50/TUBE 50/TUBE 50/TUBE 50/TUBE 50/TUBE Sipex corporation TM Headquarters and Sales Office 2 South Hillview Drive Milpitas, CA 505 TEL: (08) -7500 FAX: (08) 5-7600 Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. Date: 7/25/06 Rev G SP086 .5A Low Dropout Linear Regulator © 2006 Sipex Corporation 2