SPX1585AU-1.5

SPX1585AU-1.5

  • 厂商:

    SIPEX(迈凌)

  • 封装:

  • 描述:

    SPX1585AU-1.5 - 5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response - Sipex Co...

  • 详情介绍
  • 数据手册
  • 价格&库存
SPX1585AU-1.5 数据手册
SPX1585 5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response FEATURES • Adjustable Output Down To 1.2V • Fixed Output Voltages 1.5V, 2.5V, 3.3V • Output Current Of 5A • Low Dropout Voltage 1.1V Typ @ 5A. • Extremely Tight Load And Line Regulation • Current & Thermal Limiting • Standard 3-Terminal Low Cost TO-220 & TO-263 • Similar To Industry Standard LT1085/LT1585 APPLICATIONS • Powering VGA & Sound Card • Power PC Supplies • SMPS Post-Regulator • High Efficiency “Green” Computer Systems • High Efficiency Linear Power Supplies • Portable Instrumentation • Constant Current Regulators • Adjustable Power Supplies • Battery charger PRODUCT DESCRIPTION The SPX1585 are low power 5A adjustable and fixed voltage regulators that are very easy to use. It requires only 2 external resistors to set the output voltage for adjustable version. The SPX1585 are designed for low voltage applications that offer lower dropout voltage and faster transient response. This device is an excellent choice for use in powering low voltage microprocessor that require a lower dropout, faster transient response to regulate from +2.5V to 3.8V supplies and as a post regulator for switching supplies applications. The SPX1585 features low dropout of a maximum 1.2 volts. The SPX1585 offers full protection against over-current faults, reversed input polarity, reversed load insertion, and positive and negative transient voltage. On-Chip trimming adjusts the reference voltage to 1%. The IQ of this device flows into the load, which increases efficiency. The SPX1585 are offered in a 3-pin TO-220 and TO-263 package compatible with other 3 terminal regulators. For a 8A low dropout regulator refer to the SPX1584 data sheet. PIN CONNECTIONS TO-263-3 (T) 3 VIN VOUT ADJ/GND Front View TO-220-3 (U) 3 VIN VOUT ADJ/GND SPX1585 2 1 SPX1585 2 1 Top View Date: 04/29/04 SPX1585 ABSOLUTE MAXIMUM RATINGS Lead Temp. (Soldering, 10 Seconds) .............................. 300°C Storage Temperature Range ............................ -65° to +150°C Operating Junction Temperature Range SPX1585 Control Section.......................... -45°C +125°C SPX1585 Power Transistor.........................-45°C +150°C Input Voltage........................................................ 10V Input to Output Voltage Differential .................... 10V ELECTRICAL CHARACTERISTICS (NOTE 1) at IOUT = 10mA, TA=25°C, unless otherwise specified. PARAMETER 1.5V Version Output Voltage (Note 2) SPX1585-1.5V, 0 < IOUT < 5A, 3.3V
SPX1585AU-1.5
物料型号: - SPX1585U, SPX1585U-1.5, SPX1585U-2.5, SPX1585U-3.3 - SPX1585AU, SPX1585AU-1.5, SPX1585AU-2.5, SPX1585AU-3.3 - SPX1585T, SPX1585T-1.5, SPX1585T-2.5, SPX1585T-3.3 - SPX1585AT, SPX1585AT-1.5, SPX1585AT-2.5, SPX1585AT-3.3

器件简介: SPX1585是一款5A低功耗可调及固定输出电压调节器,适用于低电压应用,提供较低的下拉电压和更快的瞬态响应。该器件非常适合用于为需要较低下拉电压和更快瞬态响应的低电压微处理器供电,以及作为开关电源应用的后调节器。

引脚分配: - 3引脚TO-220和TO-263封装兼容其他3端固定电压调节器。

参数特性: - 可调输出低至1.2V - 固定输出电压1.5V、2.5V、3.3V - 输出电流5A - 低下拉电压1.1V(典型值@5A) - 极小的负载和线路调节 - 电流和热限制 - 标准3端低成本TO-220和TO-263封装 - 类似于行业标准的LT1085/LT1585

功能详解: SPX1585提供过流故障、反相输入极性、反相负载插入以及正负瞬态电压的全面保护。内部芯片校准将参考电压调整至1%。该设备提供3引脚TO-220和TO-263封装。

应用信息: - 为VGA和声卡供电 - 电源PC供应 - 开关电源后调节器 - 高效率“绿色”计算机系统 - 高效率线性电源 - 便携式仪表 - 恒流调节器 - 可调电源 - 电池充电器
SPX1585AU-1.5 价格&库存

很抱歉,暂时无法提供与“SPX1585AU-1.5”相匹配的价格&库存,您可以联系我们找货

免费人工找货