SPX29152T5

® SPX29150/51/52/53 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response Time FEATURES ■ Adjustable Output Down To 1.25V ■ 1% Output Accuracy ■ Output Current of 1.5A ■ Low Dropout Voltage of 390mV @ 1.5A ■ Extremely Tight Load and Line Regulation ■ Extremely Fast Transient Response ■ Reverse-Battery Protection ■ Zero Current Shutdown (5 pin version) ■ Error Flag Signal Output for Out of Regulation State (5 pin version) ■ Standard TO-220 and TO-263 Packages APPLICATIONS ■ Powering VGA & Sound Card ■ LCD Monitors ■ USB Power Supply ■ Power PC™ Supplies ■ SMPS Post Regulator ■ High Efficiency “Green” Computer Systems ■ High Efficiency Linear Power Supplies ■ Portable Instrumentation ■ Constant Current Regulators ■ Adjustable Power Supplies ■ Battery Charger Now Available in Lead Free Packaging Refer to page 8 for pinouts. DESCRIPTION The SPX29150/51/52/53 are 1.5A, highly accuracy voltage regulators with a low drop out voltage of 390mV dropout (typical) @ 1.5A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response. They are fully fault protected against over-current, reverse battery, and positive and negative voltage transients. On-Chip trimming adjusts the reference voltage to 1% initial accuracy. Other features in the 5 pin versions include Enable, and Error Flag. The SPX29150/51/52/53 is offered in 3 & 5-pin TO-220 & TO-263 packages. For a 3A version, refer to the SPX29300 data sheet. TYPICAL APPLICATION CIRCUIT VIN 6.8 F + 1 SPX29150 3 2 + 10 F VOUT V IN 6.8 F + 1 SPX29152 2 GND 3 5 4 + R1 V OUT 10 F ADJ R2 Figure 1. Fixed Output Linear Regulator Figure 2. Adjustable Output Linear Regulator Date:5/25/04 SP29150/51/52/53 1.5A Low Dropout Voltage Regulator © Copyright 2004 Sipex Corporation 1 ABSOLUTE MAXIMUM RATINGS Lead Temperature (soldering, 5 seconds) ................260°C Storage Temperature Range........................-65°C to +150°C Operating Junction Temperature Range......-40°C to +125°C Input Voltage (Note 7) .................................................... 16V ELECTRICAL CHARACTERISTICS at VIN=VOUT + 1V and IOUT = 10mA, CIN = 6.8µF, COUT = 10µF, TA = 25°C, unless otherwise specified. The Boldface applies over the junction temperature range. Adjustable versions are set to 5.0V. SPX29150/51 MIN MAX PARAMETER Fixed Voltage Options 1.8V Version Output Voltage 2.5V Version Output Voltage 3.3V Version Output Voltage 5.0V Version Output Voltage All Voltage Options Line Regulation Load Regulation ∆V/∆T Dropout Voltage (Note 1, except 1.8V) Ground Current (Note 3) Ground Pin Current at Dropout Current Limit Output Noise Voltage (10Hz to 100kHz) IL=100mA Reference Voltage Reference Voltage Adjust Pin Bias Current Reference Voltage Temp. Coeff. Adjust Pin Bias Current Temp. Coeff. Date:5/25/04 CONDITIONS TYP UNITS IOUT = 10mA 10mA ≤ IOUT ≤ 1.5A, 2.5V ≤ VIN ≤ 16V IOUT = 10mA 10mA ≤ IOUT ≤ 1.5A, 3.5V ≤ VIN ≤ 16V IOUT = 10mA 10mA ≤ IOUT ≤ 1.5A, 4.3V ≤ VIN ≤ 16V IOUT = 10mA 10mA ≤ IOUT ≤ 1.5A, 6.0V ≤ VIN ≤ 16V IOUT=10mA,(VOUT+1V) ≤ VIN ≤ 16V VIN=VOUT+1V, 10mA≤ IOUT ≤ IFULLLOAD VOUT Temp Coefficient IOUT=100mA IOUT=750mA IOUT=1.5A IOUT=750mA, VIN=VOUT+1V IOUT=1.5A VIN=0.1V less than specified VOUT, IOUT=10mA VOUT=0V (Note 2) CL=10µF CL=33µF Adjustable version only Adjustable version only (Note 8) 1.8 1.8 1.782 1.764 1.818 1.836 V 2.5 2.5 2.475 2.450 2.525 2.550 V 3.3 3.3 3.267 3.234 3.333 3.366 V 5.0 5.0 4.950 4.900 5.050 5.100 V SPX29150/51/52/53 0.1 0.2 13 70 230 390 12 45 0.9 2.2 400 260 1.240 1.228 1.215 1.203 40 (Note 4) 13 0.1 1.252 1.265 1.277 80 120 nA ppm/°C nA/°C V 1.7 0.5 1 100 200 600 25 mA mA A µVRMS % % ppm/°C mV SP29150/51/52/53 1.5A Low Dropout Voltage Regulator © Copyright 2004 Sipex Corporation 2 ELECTRICAL CHARACTERISTICS at VIN=VOUT + 1V and IOUT = 10mA, CIN = 6.8µF, COUT = 10µF, TA = 25°C, unless otherwise specified. The Boldface applies over the junction temperature range. Adjustable versions are set to 5.0V. PARAMETER CONDITIONS FLAG OUTPUT (ERROR COMPARATOR) Output Leakage Current Output Low Voltage Upper Threshold Voltage Lower Threshold Voltage Hysteresis ENABLE Input Input Logic Voltage Low (OFF) High (ON) ENABLE Input Pin VIN