XRT7296IWTR

XRT7296
         + * APPLICATIONS FEATURES   ./ . =7 
*   7 2; >,    $,++-      ./ .
*   
+ * / -      0,+ 1  /,  ?
? >,     +/ 21  3+- 4,++  %  0@   >,     +/ 21    /  5" 6 5!  $3  = /  +   +/ 21 4 ++/ *78*%%   +/ 21 7   4,+* 49:
4 /  
/      /+  3/; $,/  + &< 02  , +- GENERAL DESCRIPTION 1 "%)   .,++-    0@ 
      .
 '")@3 (   ')!@3 (  +/  / + 3 ,  .  =7  * '&!@3 ( +   /A+ /3+  1       / +   1  "%&
=7  *  "%&       /   1 "%) /   , /+/;  ,+*+ , +   @ ,+  //  6  /1/+ 7     5"  /  3+    +- 1,1 A + /+   1  /   / /   3 + +    /   .+    , ,  1  /   49 '
(  :
4 ' ( / .,/ .   3    1 +   / + -  /  //,  + /+,   1 /1 .  /  /   + .  A + +  /   41 /    /  .,/ / 3 1 "%)  ,./,  , 4@=  /1+-   /;    !*  0
0  =C /;  1  /  >,   + &< 2  , + /,   A, 2  . "8 ' /,  .  D  /  ( =*/1 ,+ 1  //,- +  ++ >,  A + /   . + >,+B    1 /*/ /   +  $ -  +  + ,3+ *1    31 +/+    + *3/;  3+ 21 1 3,+* + *3/; //, ORDERING INFORMATION Part No. Package Operating Temperature Range "%) 0 !   ) @+ 0
0 *
  D !&
 "%) 8 ! C    @+ C
 =C *
  D !&
   
    !" #  $   %&!  '&( ))!*"  $ '&( ))!*"" XRT7296 BLOCK DIAGRAM = 7=
  <  & & 0
 7
 ! # % 49:
4 /  0,+ 1  @0  4/; @? 0
 " 7
 ! # @0 " 49:
4
/  
 *   @ 75 % @ 0 
  @   ==0 ==0 )    ,   AG 1 7  ,+   + 'See Table 3 and Figure 3(  1 4 ++/ *78*%% ,+   +  1 ,+   3- 1 "%)   1    +  Parameter Specification   ")@3  ±    4 + 21 1 * ,3, '49(    "& 
&F  0,+ 1  +  ,+ , . 1   +  Figure 3  Figure 4 1 ,+  +, 3 /+  3-  / ./  . 1   +  1 ,+  +, , 3 3 * 2  )< ;  !&< ;  ,   1 /   . 1 ,+  02    + $  ++      1 2   )! ± @:B , 3 *!  D&"4  1 2   ") ± @:B , 3 *!4  *4  Notes 1 The pulse template proposed by G.703 standards is shown in Figure 4 and specified in Table 4 The proposed G.703 standards further state that the voltage in a time slot containing a 0 must not exceed
5% of the peak pulse amplitude, except for the residue of preceding pulses. 2 The power levels specified by the proposed G.703 standards are identical except that the power is to be measured in 3kHz bands. 3 The all 1s pattern must be a pure all 1s signal, without framing or other control bits. Table 2. DSX•3 Interconnection Specification Lower Curve Time   *) *)   D) & N D Upper Curve Equation Time *  *)!  *)!    D ) N D! OO* * D)   D) Equation D &N  D  N DOOD &D" *!'*)( Table 3. DSX-3 Pulse Template Boundaries for ANSI T1.404 Standards (See Figure 3. ) Lower Curve Time *!&    *) *)    D) D)    D & N D Upper Curve Equation Time * *!&  *)!  *)!   D ) N D !OO * * *)!   ) Equation D &N  D  N DOO D !D" *!'*)( Table 4. DSX-3 Pulse Template Boundaries for Bellcore TR-NWT-000499 Standards (See Figure 4)    ! XRT7296  Normalized Amplitudes Normalized Amplitudes   ! )    * *& *  &   ! )    * * & *&  &  & Time Slots-Normalized to Peak Location Time Slots-Normalized to Peak Location Figure 3. DSX-3 Isolated Pulse Template for ANSI T1.404 Standards Figure 4. DSX-3 Isolated Pulse Template for Bellcore TR-NWT-000499 Parameter Specification STS-1 SIGNAL REQUIREMENTS   &!@3  $ *   1 /*/ /   .    1 * Table 5 + 1 +  >,    1 *   . 1
 +  ,+   +   -  ;   /.  . *   '*I*&( ' Figure 5(   4 + 21 1 * ,3, '49(    "& 
&F 02    +  2 *3 2  +  +  ,    1 *  ./ ,  +2*  .+  21  4 /,.. . >, /.  +  @:B  21 *"4  "4 Table 5. STSX-1 Interconnection Specification Normalized Amplitude    )   Figure 5. STSX-1 Isolated Pulse Template for Bellcore TA-TSY-000253    % ! " !) )& &   ! ! &% ! *   XRT7296 E3 SIGNAL REQUIREMENTS 1 "%)       ,+  1 /.     /  5" Figure 6 12 1  " '&& D &( <  ,+ ;  >,    /    5"  Table 6 12 1 ,+  /./     !)& '&& * &%( 7+ ,+ && &  '&& * &(    & '&& D %%&(    % '&& D &&(  *&! Figure 6. CCITT G.703 Pulse Mark at the 34,368-kbit/s Interface Parameter Value 0,+ 1 '7++-  /,+( ++ ; .  + + , /* . 21 1 ; 'see Figure 6(   / . 1  0'(  /1
 / = /A+      / "&   7+ 0 ;