P4KE36C-LF

ELECTRONIC P4KE6.8(C)-LF THRU P4KE540(C)A-LF 400W TRANSIENT VOLTAGE SUPPRESSOR FEATURES PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY FLAMMABILITY CLASSIFICATION 94V-0 400W SURGE CAPABILITY AT 1ms EXCELLENT CLAMPING CAPABILITY LOW ZENER IMPEDANCE FAST RESPONSE TIME:TYPICALLY LESS THAN 1.0 PS FROM 0 VOLTS TO BV MIN TYPICAL IR LESS THAN 1μA ABOVE 10V HIGH TEMPERATURE SOLDERING GUARANTEED:260℃/10S /.375〞(9.5mm) LEAD LENGTH/5LBS., (2.3KG) TENSION LEAD FREE 1.0(25.4) MIN .034(0.9) .028(0.7) .205(5.2) .166(4.2) .107(2.7) .080(2.0) 1.0(25.4) MIN MECHANICAL DATA CASE：MOLDED PLASTIC TERMINALS︰AXIAL LEADS, SOLDERABLE PER MIL-STD-202, METHOD 208 POLARITY：COLOR BAND DENOTED CATHODE EXCEPT BIPOLAR WEIGHT：0.34 GRAMS CASE：DO41 DIMENSIONS IN INCHES AND (MILLIMETERS) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED RATINGS PEAK POWER DISSIPATION AT TA=25℃, TP=1ms(NOTE1) PEAK PULSE CURRENT WITH A 10/1000us WAVEFORM(NOTE 1) STEADY STATE POWER DISSIPATION AT TL=75℃, LEAD LENGTHS 0.375” (9.5mm) (NOTE2) PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD (JEDEC METHOD) (NOTE 3) TYPICAL THERMAL RESISTANCE JUNCTUION-TO-AMBIENT OPERATING AND STORAGE TEMPERATURE RANGE SYMBOL PPK IPPM PM(AV) IFSM VALUE MINIMUM 400 SEE NEXT TABLE 1.0 40.0 UNITS WATTS A WATTS Amps ℃/W ℃ RθJA 100 - 55 TO + 175 TJ,TSTG NOTE︰ 1. NON-REPETITIVE CURRENT PULSE, PER FIG.3 AND DERATED ABOVE TA=25℃PER FIG 2. 2. MOUNTED ON COPPER PAD AREA OF 1.6×1.6” (40×40mm) PER FIG. 5 3. 8.3ms SINGLE HALF SINE-WAVE, DUTY CYCLE=4 PULSES PER MINUTES MAXIMUM 4. FOR BIDIRECTIONAL USE C SUFFIX FOR 10﹪TOLERANCE, CA SUFFIX FOR 5﹪TOLERANCE http:// www.sirectsemi.com DEVICE BREAKDOWN VOLTAGE BBR(VOLTS) @IT (mA) MIN MAX 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.50 110.0 105.0 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 P4KE6.8(C)-LF P4KE6.8(C)A-LF P4KE7.5(C)-LF P4KE7.5(C)A-LF P4KE8.2(C)-LF P4KE8.2(C)A-LF P4KE9.1(C)-LF P4KE9.1(C)A-LF P4KE10(C)-LF P4KE10(C)A-LF P4KE11(C)-LF P4KE11(C)A-LF P4KE12(C)-LF P4KE12(C)A-LF P4KE13(C)-LF P4KE13(C)A-LF P4KE15(C)-LF P4KE15(C)A-LF P4KE16(C)-LF P4KE16(C)A-LF P4KE18(C)-LF P4KE18(C)A-LF P4KE20(C)-LF P4KE20(C)A-LF P4KE22(C)-LF P4KE22(C)A-LF P4KE24(C)-LF P4KE24(C)A-LF P4KE27(C)-LF P4KE27(C)A-LF P4KE30(C)-LF P4KE30(C)A-LF P4KE33(C)-LF P4KE33(C)A-LF P4KE36(C)-LF P4KE36(C)A-LF P4KE39(C)-LF P4KE39(C)A-LF P4KE43(C)-LF P4KE43(C)A-LF P4KE47(C)-LF P4KE47(C)A-LF P4KE51(C)-LF P4KE51(C)A-LF P4KE56(C)-LF P4KE56(C)A-LF P4KE62(C)-LF P4KE62(C)A-LF P4KE68(C)-LF P4KE68(C)A-LF P4KE75(C)-LF P4KE75(C)A-LF P4KE82(C)-LF P4KE82(C)A-LF P4KE91(C)-LF P4KE91(C)A-LF P4KE100(C)-LF P4KE100(C)A-LF WORKING PEAK REVERSE VOLTAGE VRWM(VOLTS) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 MAXIMUM REVERSE LEAKAGE AT VRWM IR(μA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 MAXIMUM REVERSE CURRENT IRSM (AMPS) 38 40 36 37 33 35 30 31 28 29 26 27 24 25 22 23 19 20 18 19 16 17 14 15 13 14 12 13 11 11.2 10 10 9 9 8 8.4 7.4 7.8 6.8 7.1 6.2 6.5 5.7 6.0 5.2 5.5 4.7 5.0 4.3 4.6 3.9 4.1 3.6 3.7 3.2 3.4 2.9 3.1 MAX MAXIMUM CLAMPING TEMPERATURE VOLTAGE COEFICIENT VRWM OF VBR (VOLTS) (%C) 0.057 10.8 0.057 10.5 0.061 11.7 0.061 11.3 0.065 12.5 0.065 12.1 0.068 13.8 0.068 13.4 0.073 15.0 0.073 14.5 0.075 16.2 0.076 15.6 0.078 17.3 0.078 16.7 0.081 19.0 0.081 18.2 0.084 22.0 0.084 21.2 0.086 23.5 0.086 22.5 0.088 26.5 0.088 25.5 0.090 29.1 0.090 27.7 0.092 31.9 0.092 30.6 0.094 34.7 0.094 33.2 0.096 39.1 0.096 37.5 0.097 43.5 0.097 41.4 0.098 47.7 0.098 45.7 0.099 52.0 0.099 49.9 0.100 56.4 0.100 53.9 0.101 61.9 0.101 59.3 0.101 67.8 0.101 64.8 0.102 73.5 0.102 70.1 0.103 80.5 0.103 77.0 0.104 89.0 0.104 85.0 0.104 98.0 0.104 92.0 0.105 108.0 0.105 103.0 0.105 118.0 0.105 113.0 0.106 131.8 0.106 125.0 0.106 144.0 0.106 137.0 http:// www.sirectsemi.com WORKING MAXIMUM MAXIMUM MAX MAXIMUM PEAK REVERSE REVERSE CLAMPING TEMPERATURE DEVICE REVERSE LEAKAGE CURRENT VOLTAGE COEFICIENT VOLTAGE AT VRWM IRSM VRWM OF VRR VRWM(VOLTS) (AMPS) (VOLTS) (%C) IR(μA) 0.107 158.0 2.7 5.0 89.2 1.0 121.0 99.0 P4KE110(C)-LF 0.107 152.0 2.8 5.0 94.0 1.0 116.0 105.0 P4KE110(C)A-LF 0.107 173.0 2.4 5.0 97.2 1.0 132.0 108.0 P4KE120(C)-LF 0.107 165.0 2.5 5.0 102.0 1.0 126.0 114.0 P4KE120(C)A-LF 0.107 187.0 2.2 5.0 105.0 1.0 143.0 117.0 P4KE130(C)-LF 0.107 179.0 2.3 5.0 111.0 1.0 137.0 124.0 P4KE130(C)A-LF 0.108 215.0 2.0 5.0 121.0 1.0 165.0 135.0 P4KE150(C)-LF 0.108 207.0 2.0 5.0 128.0 1.0 158.0 143.0 P4KE150(C)A-LF 0.108 230.0 1.8 5.0 130.0 1.0 176.0 144.0 P4KE160(C)-LF 0.108 219.0 1.9 5.0 136.0 1.0 168.0 152.0 P4KE160(C)A-LF 0.108 244.0 1.7 5.0 138.0 1.0 187.0 153.0 P4KE170(C)-LF 0.108 234.0 1.8 5.0 145.0 1.0 179.0 162.0 P4KE170(C)A-LF 0.108 258.0 1.6 5.0 146.0 1.0 198.0 162.0 P4KE180(C)-LF 0.108 246.0 1.7 5.0 154.0 1.0 189.0 171.0 P4KE180(C)A-LF 0.108 287.0 1.5 5.0 162.0 1.0 220.0 180.0 P4KE200(C)-LF 0.108 274.0 1.53 5.0 171.0 1.0 210.0 190.0 P4KE200(C)A-LF 0.108 344.0 1.16 5.0 175.0 1.0 242.0 198.0 P4KE220(C)-LF 0.108 328.0 1.22 5.0 185.0 1.0 231.0 209.0 P4KE220(C)A-LF 0.110 360.0 1.11 5.0 202.0 1.0 275.0 225.0 P4KE250(C)-LF 0.110 344.0 1.16 5.0 214.0 1.0 263.0 237.0 P4KE250(C)A-LF 0.110 430.0 0.93 5.0 243.0 1.0 330.0 270.0 P4KE300(C)-LF 0.110 414.0 0.97 5.0 256.0 1.0 315.0 285.0 P4KE300(C)A-LF 0.110 504.0 0.79 5.0 284.0 1.0 385.0 315.0 P4KE350(C)-LF 0.110 482.0 0.83 5.0 300.0 1.0 368.0 332.0 P4KE350(C)A-LF 0.110 574.0 0.70 5.0 324.0 1.0 440.0 360.0 P4KE400(C)-LF 0.110 548.0 0.73 5.0 342.0 1.0 420.0 380.0 P4KE400(C)A-LF 0.110 630.0 0.64 5.0 356.0 1.0 484.0 396.0 P4KE440(C)-LF 0.110 600.0 0.67 5.0 376.0 1.0 462.0 418.0 P4KE440(C)A-LF 0.110 686.0 0.58 5.0 389.0 1.0 528.0 432.0 P4KE480(C)-LF 0.110 658.0 0.61 5.0 408.0 1.0 504.0 456.0 P4KE480(C)A-LF 0.110 729.0 0.55 5.0 413.0 1.0 561.0 459.0 P4KE510(C)-LF 0.110 698.0 0.57 5.0 434.0 1.0 535.0 485.0 P4KE510(C)A-LF 0.110 772.0 0.52 5.0 437.0 1.0 594.0 486.0 P4KE540(C)-LF 0.110 740.0 0.54 5.0 459.0 1.0 567.0 513.0 P4KE540(C)A-LF NOTES： 1. VBR MEASURED AFTER IT APPLIED FOR 300 μS,IT=SQUARE WAVE PULSE OR EQUIVALENT 2. SURGE CURRENT WAVEFORM PER FIGURE 3 AND DERATED PER FIGUE 2. 3. VF = 3.5V AT IF=25A (P4KE6.8(C) THRU P4KE200(C)A) VF = 6.5V AT IF=25A (P4KE220(C) THRU P4KE540(C)A) ON 1/2 SQUARE OR EQUIVALENT SINE WAVE. PW = 8.3ms, DUTY CYCLE=4 PULSES PER MINUTE MXIMUM 4. FOR BIPOLAR TYPES HAVING VRWM OF 10 VOLTS AND UNDER, THE IR LIMIT IS DOUBLED BREAKDOWN VOLTAGE BBR(VOLTS) @IT (mA) MIN MAX http:// www.sirectsemi.com RATINGS AND CHARACTERISTIC CURVES P4KE6.8(C)-LF THRU P4KE540(C)A-LF PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE,% FIG. 2 - PULSE DERATING CURVE 100 FIG. 1 - PEAK PULSE POWER RATING CURVE 100 PPPM, PEAK PULSE POWER,KW NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA=25℃ 75 10 50 1.0 25 0.1 0.1US 1.0US 10US 100US 1.0MS 10MS 0 0 25 50 75 100 125 150 175 200 Ta, AMBIENT TEMPERATURE,℃ td, PULSE WIDTH, sec FIG. 3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % 150 tr =10uSec. PEAK VALUE IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP FIG. 4 - TYPICAL JUNCTION CAPACITANCE UNIDRECTIONAL 10,000 TJ=25℃ f=1.0 MHZ Vsig=50mVp-p 100 HALF VALUE Ipp 50 CJ, JUNCTION CAPACITANCE , PF 2 10/1000uSec. WAVEFORM as DEFINED by R.E.A. 1,000 MEASURED at ZERO BIAS 0 0 td 1.0 2.0 t, TIME,ms 3.0 4.0 100 MEASURED at STAND-OFF VOLTAGE, VWM PM(AV), STEADY STATE POWER DISSIPATION, (W) FIG. 5 – STEADY STATE POWER DERATING CURVE 1.00 0.75 0.50 0.25 0 0 25 50 75 100 125 150 TL, LEAD TEMPERATURE (℃) 175 200 1.6×1.6×.040” (40×40×1mm) Copper Heat Sinks L=0.375” (9.5mm) Lead Lengths 60Hz Resistive or Inductive Load 10 1.0 10 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 7 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY IFSM PEAK FORWARD SURGE 50 CURRENT AMPERES 40 30 20 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=Tjmax. FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 100 MEASURED AT DEVICES STAND-OFF VOLTAGE,VWM 10 1 TA=25℃ 10 0 1 10 NUMBER OF CYCLES AT 60HZ 100 0.1 0.01 0 100 200 300 400 500 V(BR), BREAKDOWN VOLTAGE, VOLTS http:// www.sirectsemi.com