PMR8050-E-R005-C-1-B

E L E C T R O N I C PMR SERIES Power Metal Low OHM Chip Resistor □ FEATURES - Rated power from 0.125 up to 2W - Low resistance value - Excellent temperature coefficient - Excellent frequency response - Lead-Free available □ - APPLICATIONS Current detection Linear and switching power supplies Motherboard Digital camera Mobile phone Code Letter L W H Dimensions (mm) 0805 2.05 ± 0.25 1.30 ± 0.25 0.35 ± 0.15 2010 5.10 ± 0.25 2.55 ± 0.25 0.65 ± 0.15 2512 6.35 ± 0.25 3.20 ± 0.25 0.55 ± 0.25 □ TECHNICAL SPECIFICATIONS Characteristics Unit Model Power Ratings W PMR0805 PMR2010 PMR2512 Model PMR0805A PMR0805B Resistance Value mΩ PMR2010C PMR2010D PMR2010E PMR2512D PMR2512E Temperature Coefficient of Resistance Operation Temperature Range Resistance Tolerance Max. Working Voltage ppm/℃ ֯C % V Feature Value 0.125 ~ 0.25 0.5 ~ 2.0 1.0 ~ 2.0 Value 10 ~ 200 10 ~ 200 1 ~ 200 1 ~ 500 1 ~ 500 5 ~ 10 10 ~ 100 Measurement Method JIS Code 3A / JIS Code 3D Refer to JIS C 5202 5.1 75 ~ 275 ﹣60 ~ ﹢170 ± 0.5 ~ 3.0 (P*R) 1/2 Refer to JIS C 5202 5.2 JIS C 5201 4.2.4 - http:// www.sirectsemi.com PMR SERIES □ STANDARD ELECTRICAL SPECIFICATIONS Power Rating (W) Resistance Range (Ω) RTC (ppm/֯C) Model Tolerance (%) Dimensions (mm) ±75 PMR0805 0.125 0.01-0.20 ±100 ±150 ±275 ±75 PMR0805 0.25 0.01-0.20 ±100 ±150 ±275 ±75 PMR2010 0.5 0.001-0.20 ±100 ±150 ±275 ±75 PMR2010 1.0 0.001-0.5 ±100 ±150 ±275 ±75 PMR2010 2.0 0.001-0.5 ±100 ±150 ±275 ±75 PMR2512 1.0 0.005-0.01 ±100 ±150 ±275 ±75 PMR2512 2.0 0.01-0.1 ±100 ±150 ±275 ±0.5 ±1 ±3 L=2.05mm±0.25mm W=1.30mm±0.25mm H=0.35mm±0.15mm ±0.5 ±1 ±3 L=2.05mm±0.25mm W=1.30mm±0.25mm H=0.35mm±0.15mm ±0.5 ±1 ±3 L=5.10mm±0.25mm W=2.55mm±0.25mm H=0.65mm±0.15mm ±0.5 ±1 ±3 L=5.10mm±0.25mm W=2.55mm±0.25mm H=0.65mm±0.15mm ±0.5 ±1 ±3 L=5.10mm±0.25mm W=2.55mm±0.25mm H=0.65mm±0.15mm ±0.5 ±1 ±3 L=6.35mm±0.25mm W=3.20mm±0.25mm H=0.65mm±0.15mm ±0.5 ±1 ±3 L=6.35mm±0.25mm W=3.20mm±0.25mm H=0.65mm±0.15mm http:// www.sirectsemi.com PMR SERIES □ PART NUMBER INFORMATION PMR2512 – A - R005 - a - 1 –A Package Model PMR8050 PMR2010 PMR2512 Resistance Value R005=5mΩ R050=50mΩ Tolerance 1=±0.5% 2=±1% 3=±3% Power Ratings A=0.125W B=0.25W C=0.5W D=1W E=2W Temperature Coefficient a=±75ppm/֯ C b=±100ppm/֯ C c=±150ppm/֯ C d=±275ppm/֯ C Packaging A=500 pcs/reel B=1,000 pcs/reel C=2,000 pcs/reel D=4,000 pcs/reel E=5,000 pcs/reel Rated Power in % http:// www.sirectsemi.com PMR SERIES □ RELIABILITU PERFORMANCE Test Item Condition of Test Requirements Measurement Method Refer to JIS C 5202 7.4 Refer to JIS C 5202 5.5 Refer to JIS C 5202 7.1 Refer to JIS C 5202 7.11 Thermal Shock -60°C to + 150°C, 1000 cycles, 15 minutes at each extreme ± 0.5% Short Time Overload 5 x rated power for 5 seconds ± 0.5% Low Temperature Storage Kept - 60°C for 24 hours ± 0.5% High Temperature Exposure Kept + 170°C for 1000 hours ± 0.5% Bias Humidity + 85°C, 85% RH, 10% Bias, 1000 hours ± 0.5% - Mechanical Shock 100G’s for 6 milliseconds, 5 pulses Frequency varied 10 to 2000Hz ± 0.5% Refer to JIS C 5202 6.2 Vibration in one minute, 3 directions, 12 hours ± 0.5% - Load Life 1000 hours @ rated power, + 70°C, 1.5 hours “ON”, 0.5 hours “OFF” + 260°C Solder,10 - 12 second dwell, 25mm/second emergence MIL-STD-202, Method 106, 0% power, 7a and 7b not required ± 1.0% Refer to JIS C 5202 7.10 Refer to JIS C 5202 6.4 Resistance to Solder Heat ± 0.5% Moisture Resistance ± 0.5% - http:// www.sirectsemi.com PMR SERIES □ PACKING Tape Packaging Dimensions Reel Dimensions Sirectifier Global Corp., Delaware, U.S.A. U.S.A.: sgc@sirectsemi.com France: ss@sirectsemi.com Taiwan: se@sirectsemi.com Hong Kong: hk@sirectsemi.com China: st@sirectsemi.com …Thailand: th@sirectsemi.com Philippines: aiac@sirectsemi.com Belize: belize@sirectsemi.com http:// www.sirectsemi.com 4.5 0.5