SGA-6386

Product Description The SGA-6386 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring 1 micron emitters provides high F T and excellent thermal perfomance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only 2 DC-blocking capacitors, a bias resistor and an optional RF choke are required for operation. The matte tin finish on Sirenza’s lead-free package utilizes a post annealing process to mitigate tin whisker formation and is RoHS compliant per EU Directive 2002/95. This package is also manufactured with green molding SGA-6386 SGA-6386Z Pb RoHS Compliant & Green Package DC-5000 MHz, Cascadable SiGe HBT MMIC Amplifier Product Features • Now available in Lead Free, RoHS Compliant, & Green Packaging • Broadband Operation: DC-5000 MHz • Cascadable 50 Ohm • Operates From Single Supply • Low Thermal Resistance Package Gain & Return Loss vs. Frequency 20 GAIN VD= 4.9 V, ID= 80 mA (Typ.) 0 -10 Return Loss (dB) 15 Gain (dB) 10 5 0 0 1 2 3 Frequency (GHz) 4 5 ORL IRL Applications • • • • PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite -20 TL=+25ºC -30 -40 Symbol G Parameter Small Signal Gain Units dB Frequency 850 MHz 1950 MHz 2400 MHz 850 MHz 1950 MHz 850 MHz 1950 MHz Min. 14.0 Typ. 15.4 13.5 12.5 21.0 19.0 36.0 34.0 5000 Max. 16.9 P1dB OIP3 Output Pow er at 1dB Compression Output Third Order Intercept Point dBm dBm MHz dB dB dB V mA °C/W Bandw idth Determined by Return Loss (>10dB) IRL ORL NF VD ID RTH, j-l Input Return Loss Output Return Loss Noise Figure Device Operating Voltage Device Operating Current Thermal Resistance (junction to lead) VS = 8v RBIAS = 39 Ohms ID = 80mA Typ. TL = 25ºC 1950 MHz 1950 MHz 1950 MHz 4.6 72 26.7 16.2 4.0 4.9 80 97 5.4 88 Test Conditions: OIP3 Tone Spacing = 1 MHz, Pout per tone = 0 dBm ZS = ZL = 50 Ohms The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 1 http://www.sirenza.com EDS-100614 Rev F SGA-6386 DC-5000 MHz Cascadable MMIC Amplifier Preliminary Typical RF Performance at Key Operating Frequencies Frequency (MHz) Symbol Parameter Unit 100 500 850 1950 2400 3500 G OIP3 P1dB IRL ORL S12 NF Small Signal Gain Output Third Order Intercept Point Output Power at 1dB Compression Input Return Loss Output Return Loss Reverse Isolation Noise Figure dB dBm dBm dB dB dB dB 15.9 37.1 20.2 23.8 13.2 20.0 3.7 15.5 37.1 20.5 23.9 14.5 20.2 3.4 15.4 36.0 21.0 25.6 16.6 20.4 3.6 13.5 34.0 19.0 26.7 16.2 19.9 4.0 12.5 32.2 18.6 20.4 15.1 19.2 4.2 10.7 27.9 16.3 16.0 14.2 17.2 4.6 V = 8v Test Conditions: S RBIAS = 39 Ohms ID = 80mA Typ. TL = 25ºC OIP3 Tone Spacing = 1 MHz, Pout per tone = 0 dBm ZS = ZL = 50 Ohms Absolute Maximum Ratings Noise Figure vs. Frequency VD= 4.9 V, ID= 80 mA 7 Noise Figure (dB) 6 5 4 3 2 0 1 2 Frequency (GHz) 3 4 Parameter Max. D evi ce C urrent (ID) Max. D evi ce Voltage (VD) Max. RF Input Power Absolute Limit 160 mA 7V +18 dBm +150°C -40°C to +85°C +150°C TL=+25ºC Max. Juncti on Temp. (TJ) Operati ng T mp. Range (TL) e Max. Storage Temp. TL=+25ºC Operati on of thi s devi ce beyond any one of these li mi ts may cause permanent damage. For reli able conti nous operati on, the devi ce voltage and current must not exceed the maxi mum operati ng values speci fi ed i n the table on page one. Bi as C ondi ti ons should also sati sfy the followi ng expressi on: IDVD < (TJ - TL) / RTH, j-l T ke i nto account out of band VSWR presented by devi ces a such as SAW fi lters to determi ne maxi mum RF i nput power. Reflected harmoni c levels i n saturati on are si gni fi cant. OIP3 vs. Frequency VD= 4.9 V, ID= 80 mA 40 36 OIP3(dBm) 32 28 +25°C P1dB vs. Frequency VD= 4.9 v, ID= 80 mA 22 20 P1dB(dBm) 18 16 +25°C 24 20 0.0 0.5 TL -40°C +85°C 14 12 TL 0.0 0.5 1.0 -40°C +85°C 1.0 1.5 2.0 2.5 3.0 3.5 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) Frequency (GHz) 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 2 http://www.sirenza.com EDS-100614 Rev F SGA-6386 DC-5000 MHz Cascadable MMIC Amplifier Preliminary |S | vs. Frequency 21 |S | vs. Frequency 11 VD= 4.9 V, ID= 80 mA 20 15 |S21| (dB) 10 5 |S11| (dB) 0 -10 -20 -30 VD= 4.9 V, ID= 80 mA TL 0 0 1 2 3 Frequency (GHz) 4 +25°C -40°C +85°C TL -40 +25°C -40°C +85°C 5 0 1 2 3 Frequency (GHz) 4 5 |S | vs. Frequency 12 |S | vs. Frequency 22 -10 VD= 4.9 V, ID= 80 mA 0 -10 |S22| (dB) -20 -30 VD= 4.9 V, ID= 80 mA -15 |S12| (dB) -20 -25 TL -30 0 1 2 3 Frequency (GHz) 4 +25°C -40°C +85°C TL -40 5 +25°C -40°C +85°C 0 1 2 3 Frequency (GHz) 4 5 95 90 VD vs. ID over Temperature for fixed VS= 8 V, RBIAS= 39 ohms * VD vs. Temperature for Constant ID = 80 mA 5.5 5.3 VD(Volts) 5.1 4.9 4.7 4.5 +85°C 85 ID(mA) 80 75 -40°C +25°C 70 65 4.5 4.7 4.9 VD(Volts) 5.1 5.3 -40 -15 10 35 Temperature(°C) 60 85 * Note: In the applications circuit on page 4, RBIAS compensates for voltage and current variation over temperature. 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 3 http://www.sirenza.com EDS-100614 Rev F SGA-6386 DC-5000 MHz Cascadable MMIC Amplifier Preliminary Basic Application Circuit R BIAS Application Circuit Element Values Frequency (Mhz) Reference Designator 500 850 1950 2400 3500 VS 1 uF 1000 pF CD LC CB CD LC 220 pF 100 pF 68 nH 100 pF 68 pF 33 nH 68 pF 22 pF 22 nH 56 pF 22 pF 18 nH 39 pF 15 pF 15 nH RF in CB 4 1 SGA-6386 3 2 CB RF out Recommended Bias Resistor Values for ID=80mA RBIAS=( VS-VD ) / ID Supply Voltage(VS) RBIAS 6V 13 8V 39 10 V 62 12 V 91 VS RBIAS Note: RBIAS provides DC bias stability over temperature. 1 uF 1000 pF Mounting Instructions 1. Use a large ground pad area under device pins 2 and 4 with many plated through-holes as shown. 3. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper on both sides. CD LC CB A63 CB Pin # 1 Function RF IN Description RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. Connection to ground. For optimum RF performance, use via holes as close to ground leads as possible to reduce lead inductance. Part Identification Marking 3 3 2, 4 GND 4 A63 1 2 4 63Z 1 2 3 RF OUT/ RF output and bias pin. DC voltage is BIAS present on this pin, therefore a DC blocking capacitor is necessary for proper operation. Caution: ESD sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Part Number Ordering Information Part Number Reel Size Devices/Reel See Application Note AN-075 for Package Outline Drawing SGA-6386 SGA-6386Z 13" 13" 3000 3000 303 Technology Court, Broomfield, CO 80021 Phone: (800) SMI-MMIC 4 http://www.sirenza.com EDS-100614 Rev F