SPF-5043Z

Advanced Information SPF-5043Z Product Description The SPF-5043Z is a high performance pHEMT MMIC LNA designed for operation from 400-3000 MHz. The on-chip active bias network provides stable current over temperature and process threshold voltage variations. The SPF-5043Z offers ultra-low noise figure and high linearity performance in a gain block configuration. Its single-supply operation and integrated matching networks make implementation remarkably simple. High maximum input power specification make it ideal for high dynamic range receivers. 400-3000 MHz, GaAs pHEMT Low Noise MMIC Amplifier Pb RoHS Compliant & Green Package Gain and NF vs. Frequency Broadband Application Circuit 30 27 24 21 2.0 1.8 1.6 Gain (dB) Gain 1.4 15 12 9 6 3 0 0 500 1000 1500 2000 2500 1.0 0.8 NF 0.6 0.4 0.2 0.0 3000 NF (dB) 18 1.2 Product Features • Ultra-Low Noise Figure = 0.6 dB @ 900 MHz • Gain = 18.5 dB @ 900 MHz • High Linearity: OIP3 = 35 dBm @ 1900 MHz • P1dB = 22 dBm @ 1900 MHz • Single-supply operation: 5V @ Idq=45mA • Broadband Internal Matching • RoHS/WEEE Compliant SOT-343 package Applications • Cellular, PCS, W-CDMA, ISM, W iMAX Receivers • Low noise, high linearity gain block applications Frequency (MHz) Symbol Parameters Units Frequency Min. Typ. Max. S21 NF OIP3 P1dB S11 S22 S12 VD IDQ Rth, j-l Small Signal Power Gain Noise Figure Output Third Order Intercept Point Output Power at 1dB Compression Input Return Loss Output Return Loss Reverse Isolation Device Operating Voltage Device Operating Current (Quiescent) Thermal Resistance (junction-to-lead) dB dB dBm dBm dB dB dB V mA °C/W 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 0.9 GHz 1.9 GHz 18.3 13.4 0.65 0.70 32.5 34.5 21.0 21.8 -13.5 -14.5 -24.5 -19.5 -24.5 -20.0 5.0 45 125 Test Conditions: VS = 5.0V, IDQ = 45mA, OIP3 Tone Spacing = 1MHz, Pout per tone = 0 dBm ZS = ZL = 50 Ohms, 25C, Broadband Application Circuit The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2006 Sirenza Microdevices, Inc.. All worldwide rights reserved. 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 1 http://www.sirenza.com EDS-105475 Rev B Advanced Information SPF-5043Z GaAs Low Noise MMIC Amplifier Typical RF Performance (with Broadband Application Circuit) Symbol S21 NF OIP3 P1dB S11 S22 S12 Parameter Small Signal gain Noise Figure Output Third Order Intercept Point Output Power at 1dB compression Input Return Loss Output Return Loss Reverse Isolation VS=5.0V IDQ=45mA Unit dB dB dBm dBm dB dB dB 0.4 21.3 0.45 30.5 20.4 -11.0 -18.5 -26.0 0.8 18.9 0.60 31.5 20.7 -13.0 -23.5 -24.5 0.9 18.3 0.65 32.5 21.0 -13.5 -24.5 -24.5 TL = 25°C Frequency (GHz) 1.0 1.9 17.8 13.4 0.70 0.70 32.0 34.5 20.9 21.8 -13.5 -14.5 -24.5 -19.5 -24.5 -20.0 ZS = ZL = 50Ohms 2.2 12.2 0.85 34.5 22.3 -14.5 -18.5 -19.0 2.5 11.1 0.90 36.0 22.4 -14.0 -17.5 -18.0 3.0 9.6 1.05 36.5 22.6 -12.0 -17.0 -17.0 Test Conditions: OIP3 Tone Spacing = 1MHz Pout per tone = 0 dBm Reliability & Qualification Information Parameter Rating ESD Rating - Human Body Model (HBM) Class 1A Moisture Sensitivity (MSL) MSL 1 This product qualification report can be downloaded at: www.sirenza.com Absolute Maximum Ratings Parameter Max Device Current (ID) Max Device Voltage (VD) Max RF Input Power Max Dissipated Power Max Junction Temperature (TJ) Operating Temperature Range (TL) Max Storage Temp. Absolute Limit 60mA 5.5V 25dBm 330mW 150C -40 to +85C -65 to +150C Typical Performance (with Broadband Application Circuit) DCIV Over Temperature 60 50 40 mA 30 20 10 0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 25C -40C 85C Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH, j-l TL=Source lead Temperature Caution: ESD sensitive VD Appropriate precautions in handling, packaging and testing devices must be observed. IM3 vs. Power OIP3 vs. Frequency 44 42 Pout = 0dBm /Tone, 1MHz Spacing 40 38 25C -40C 85C -30 -35 -40 -45 fc = 900MHz, 1MHz Spacing dBc dBm 36 34 32 30 28 0 500 1000 1500 2000 2500 3000 -50 -55 25C -60 -65 -70 0 3 6 9 -40C 85C 12 15 Frequency (MHz) Power Output Per Tone (dBm) 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 2 http://www.sirenza.com EDS-105475 Rev B Advanced Information SPF-5043Z GaAs Low Noise MMIC Amplifier Typical RF Performance (Broadband Application Circuit, 5V, 45mA) |S11| vs. Frequency 0 -5 -10 |S21| vs. Frequency 25 20 15 dB -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 dB 10 -40C 25C 85C 5 -40C 25C 85C 0 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Frequency (MHz) |S12| vs. Frequency 0 -5 -40C |S22| vs. Frequency 0 -5 -40C 25C 85C -10 25C 85C -10 dB -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 dB -15 -20 -25 -30 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Noise Figure vs. Frequency 2.00 1.75 25C Frequency (MHz) P1dB vs. Frequency 25 24 23 22 21 1.50 1.25 1.00 0.75 0.50 0.25 0.00 0 500 85C dBm dB 20 19 18 17 16 15 2 5C -40C 8 5C 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000 Frequency (MHz) Frequency (MHz) 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 3 http://www.sirenza.com EDS-105475 Rev B Advanced Information SPF-5043Z GaAs Low Noise MMIC Amplifier Typical Performance De-embedded S-parameters (5V, 45mA) 30 25 20 Gmax S21 Max Gain vs. Frequency Gain (dB) 15 10 5 0 -5 0 2 4 6 8 10 12 S 21 Gmax Frequency (GHz) S11 vs. Frequency S22 vs. Frequency 6 GHz 4 GHz 3.5 GHz 3 GHz 2.5 GHz 2 GHz 1.5 GHz 1 GHz .5 GHz .05 GHz 8 GHz 8 GHz 10 GHz 12 GHz 10 GHz 6 GHz 1 GHz 2 GHz 3 GHz 4 GHz 12 GHz .05 GHz 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 4 http://www.sirenza.com EDS-105475 Rev B Advanced Information SPF-5043Z GaAs Low Noise MMIC Amplifier Broadband Application Circuit Schematic (400 - 3000MHz) Vs 0.1uF 100pF 100nH 3 RF in 100pF 2,4 SPF-5043Z 1 RF out 100pF Evaluation Board Layout Bill of Materials C1 C2 C3 C4 L1 1x TAJB104KLRH Rohm 0.1uF 1x MCH185A101JK Rohm 100pF 1x MCH185A101JK Rohm 100pF 1x MCH185A101JK Rohm 100pF 1x LL1608-FSR10J Toko 100nH C1 C2 C3 L1 C4 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 5 http://www.sirenza.com EDS-105475 Rev B Advanced Information SPF-5043Z GaAs Low Noise MMIC Amplifier Pad # Function Description 1 2,4 3 RFOUT / Bias GND RFIN RF output and Bias pin. This pin is DC coupled and matched to 50 Ohms. Bias is applied through this pad. Connection to ground RF input pin. This pin is DC coupled and matched to 50 Ohms. An external DC block is required. Part Number Ordering Information Part Number Reel Size Devices/Reel Suggested Pad Layout SPF-5043Z 7" 3000 Part Identification 4 3 50Z 1 2 D e 4 e 3 L SYMBOL E D HE MIN 1.15 1.85 1.80 0.80 0.80 0.00 0.10 MAX 1.35 2.25 2.40 1.10 1.00 0.10 0.40 Nominal Package Dimensions Dimensions in inches [millimeters] Refer to drawing posted at www.sirenza.com for tolerances. HE C L E A A2 A1 1 b C L Q1 b1 2 C Q1 e b b1 c L 0.65 BSC 0.25 0.55 0.10 0.10 0.40 0.70 0.18 0.30 NOTE: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONS ARE INCLUSIVE OF PLATING. 3. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH & METAL BURR. 4. ALL SPECIFICATIONS COMPLY TO EIAJ SC70. 5. DIE IS FACING UP FOR MOLD AND FACING DOWN FOR TRIM/FORM. ie :REVERSE TRIM/FORM. 6. PACKAGE SURFACE TO BE MIRROR FINISH. A2 A A1 303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 6 http://www.sirenza.com EDS-105475 Rev B