11-MD123
Version Issue Date File Name Total Pages : A.006 : 2006/02/21 : SP-MD123-A.006.doc
:8
Low-saturation, Low-voltage Bi-directional Motor Driver
SILICON TOUCH TECHNOLOGY INC.
新竹市科學園區展業一路九號四樓之三
9-4F-3 Prosperity Road I Science-Based Industrial Park Hsinchu, Taiwan 300, R.O.C. Tel:886-3-5645656 Fax:886-3-5645626
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
11-MD123 Low-saturation, Low-voltage Bi-directional Motor Driver
General Specifications
The device is a two-channel low-saturation bi-directional motor driver IC. The design is optimal for stepper-motor applications, such as cameras, printers, FDDs, or other portable devices.
Features and Benefits
Low voltage operation ( VDD min = VS1 min = VS2 min = 1.5V ) Low saturation voltage ( Upper transistor + low transistor residual voltage; 0.5V typ. at 400mA) Parallel connection ( two-channel driver: Upper transistor + low transistor residual; 0.6V typ. at 800mA ) Separate control logic power supply and motor driver power supply Brake function High output sinking and driving capability SOP14 / DIP-14 package
Pin Assignment
SOP14
VDD IN1 O1 VS1 O2 IN2 GND 1 2 3 4 5 6 7 14 13 12 GND IN3 O3 VS2 O4 IN4 NC
DIP14
VDD IN1 O1 VS1 O2 IN2 GND 1 2 3 4 5 6 7 14 13 12 GND IN3 O3 VS2 O4 IN4 VR
11-MD123
11 10 9 8
11-MD123
11 10 9 8
SP-MD123-A.006
Version:A.006
-1-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
PIN NO. PIN NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VDD IN1 O1 VS1 O2 IN2 GND NC / VR IN4 O4 VS2 O3 IN3 GND
DESCRIPTION Power supply pin for controller. Input pin that determines driving mode. Output sinking / driving pin. Power supply pin for output driver O1/ O2. Output sinking / driving pin. Input pin that determines driving mode. Ground pin No connection (SOP14) / Voltage Reference Output (DIP14) Input pin that determines driving mode. Output sinking / driving pin. Power supply pin for output driver O3/ O4. Output sinking / driving pin. Input pin that determines driving mode. Ground pin
Absolute Maximum Ratings ( Unless otherwise noted, TA= 25℃ )
Characteristic Supply Voltage Input Voltage IO Peak Current (in parallel connection) IODC Current (in parallel connection) Power Dissipation (SOP14) Power Dissipation (DIP14) Operating Temperature Range Storage Temperature Range Symbol VDD VS VIN IOPeak IODC PD-SOP14 PD-DIP14 TOPR TSTG Rating 6.0 6.0 VDD+0.4 2.5 1 800 1130 -40 ~ 125 -65 ~ 150 Unit V V V A A mW mW °C °C
SP-MD123-A.006
Version:A.006
-2-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
Electrical Characteristic
(Unless otherwise noted, TA= 25℃ & VDD = VS = 3V )
Limit Min. 1.5 1.5 VIN1, IN2, IN3, IN4 = 0V VIN1=3V, VIN2, IN3, IN4=0V VIN1, IN2=3V, VIN3, IN4=0V Typ. 3 3 0.1 0.05 0.05 Max. 5.5 5.5 10 0.5 0.5
Characteristic
Sym. VDD VS IDD0 IDD1 IDD2
Condition
Unit V V μA mA mA
Supply Voltage
Supply Current ( IDD + IS )
VR Terminal (DIP14) ( TJ = 25℃) Output Voltage VVR VDD=3V, No loading 1.05 1.24 1.35 V
IN1 / IN2 / IN3 / IN4 Input Terminal ( TJ = 25℃) Input Voltage “H” Input Voltage “L” Input Current “H” Input Current “L” VIH VIL IIH IIL VIN = VDD VIN = 0 V 0.8*VDD -0.4 VDD+0.4 0.2*VDD ±5 ±5 V V μA μA
O1 / O2 / O3 / O4 Output Terminal ( TJ = 25℃) VOUT1 VOUT2 Output Voltage (upper + lower) VOUT3 VOUT4 Output Sustaining Voltage IOUT = 200 mA IOUT = 400 mA IOUT = 400 mA ( parallel connection ) IOUT = 800 mA ( parallel connection ) 0.2 0.4 0.2 0.5 0.35 0.75 0.45 0.8 VS V V V V V
VO(SUS) IOUT = 400 mA
SP-MD123-A.006
Version:A.006
-3-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
Truth Table
IN1 / IN3 H L H L IN2 / IN4 L H H L O1 / O3 H L H OFF O2 / O4 L H H OFF Mode Forward Reverse Brake Standby
Block Diagram & Application Circuit
System power
RVDD VDD VS2 VS1 1 11 4
10μF
Battery
IN1
2
3
O1 M1
IN2
6
5
O2
Control Logic
IN3 13 12
O3 M2
IN4
9
10
O4
NC (SOP14) VR(DIP14)
8
GND
7
14 GND
SP-MD123-A.006
Version:A.006
-4-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
Application Notes
In multiple power supply application, to get suitable input voltage range from external controller, it is suggestion connecting VDD pin to the same power source with external controller. To increase system stability, it is suggestion to connect a resistor RVDD about 100Ω between battery power and driver's VDD pin as shown on application circuit. The VR pin is a voltage reference output in DIP14 package, let VR pin in floating state in the application. The power dissipated by the IC varies widely with the supply voltage, the output current, and loading. It is important to ensure the application does not exceed the allowable power dissipation of the IC package.
SP-MD123-A.006
Version:A.006
-5-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
Package Specifications
(14-pin SOP )
E
H
C
θ L
D
7°(4X)
SYMBOL A
A2 A
Dimensions in Millimeter MIN 1.35 0.10 - 0.33 0.19 8.55 3.8 - 5.8 0.40 - 0° NOM - - - - - - - 1.27 - - - - MAX 1.75 0.25 - 0.51 0.25 8.75 4.0 - 6.2 1.27 0.10 8°
Dimensions in Inches MIN 0.0532 0.0040 - 0.013 0.0075 0.3367 0.1497 - 0.2264 0.016 - 0° NOM - - - - - - - 0.050 - - - - MAX 0.0688 0.0098 - 0.020 0.0098 0.3444 0.1574 - 0.2440 0.050 0.004 8°
A1 A2 B C D E e H L Y θ
A1 y B e
(14-pin DIP )
E1
E
eB
θ°
D
SYMBOL A A1
A2 A
Dimensions in Millimeter MIN - 0.380 3.17 - - 19.2 - 6.22 - 8.50 2.80 - θ° NOM - - 3.30 1.52 0.46 19.4 7.62 6.35 2.54 9.00 3.30 1.8 - MAX 5.33 - 3.43 - 19.6 - 6.48 - 9.50 3.80 - 15°
Dimensions in Inches MIN - 0.015 0.125 - - 0.756 - 0.245 - 0.335 0.110 - 0° NOM - - 0.130 0.060 0.018 0.764 0.300 0.250 0.100 0.355 0.130 0.074 - MAX 0.21 - 0.135 - - 0.772 - 0.255 - 0.375 0.150 - 15°
A2 b b1 D E E1 e eB L S θ
A1
L
b1
b
e
S
SP-MD123-A.006
Version:A.006
-6-
點晶科技股份有限公司
SILICON TOUCH TECHNOLOGY INC.
11-MD123
The products listed herein are designed for ordinary electronic applications, such as electrical appliances, audio-visual equipment, communications devices and so on. Hence, it is advisable that the devices should not be used in medical instruments, surgical implants, aerospace machinery, nuclear power control systems, disaster/crime-prevention equipment and the like. Misusing those products may directly or indirectly endanger human life, or cause injury and property loss. Silicon Touch Technology, Inc. will not take any responsibilities regarding the misusage of the products mentioned above. Anyone who purchases any products described herein with the above-mentioned intention or with such misused applications should accept full responsibility and indemnify. Silicon Touch Technology, Inc. and its distributors and all their officers and employees shall defend jointly and severally against any and all claims and litigation and all damages, cost and expenses associated with such intention and manipulation.
SP-MD123-A.006
Version:A.006
-7-
很抱歉,暂时无法提供与“11-MD123”相匹配的价格&库存,您可以联系我们找货
免费人工找货