GXFIBER-SFP

PRODUCT DATASHEET GxFIBER-SFP iNDUSTRiAL eTHeRNeT GiGABiT fiBeR TRANSCeiVeRS PRODUCT HiGHLiGHTS n SFP 1.25 Gbps fiber transceivers with LC style connectors for quick and easy installation - saves you time n Pluggable n Industry standard Small Form Factor (MSA compliant) - saves you space Multimode and singlemode models available Noise immune fiber runs from 550 m to 80 km Industrial rated for -40 to 85°C operation Vibration resistance latching mechanism Small Form Factor Pluggable MSA compliant F ully compliant with IEEE 802.3z Gigabit E thernet standards Low power consumption Standard duplex LC receptacle Laser Class 1 product - IEC60825-1 compliant ReCOMMeNDeD OPeRATiNG CONDiTiONS Parameter Operating Temperature Storage Temperature Humidity Power Supply Voltage Supply Current (3.3V) Data Rate min. -40 -40 5 3.1 tyP. 3.3 1250 max 85 85 95 3.5 85 Unit o o n n n n n n Lead and Hazardous Substance Free note non-condensing - C C V n n n % mA Mbit/s MeCHANiCAL DiMeNSiONS ( UNiTS iN MM) ORDeRiNG GUiDe Part Number GMFIBER-SFP-500K GMFIBER-SFP-2K GSFIBER-SFP-10K GSFIBER-SFP-30K GSFIBER-SFP-50K GSFIBER-SFP-80K Availability standard special order standard special order special order special order Mode multimode see note singlemode singlemode singlemode singlemode Data Rate (Mbps) 1.25 1.25 1.25 1.25 1.25 1.25 Light Source 850 VCSEL 1310 FP 1310 FP 1550 DFB 1550 DFB 1550 DFB TX (dBm) Min. -9 -9 -9 -4 -4 0 TX (dBm) Max. -3 -3 -3 2 2 5 RX (dBm) Sen -18 -20 -20 -23 -23 -23 Connector Type LC LC LC LC LC LC Nominal Max. Distance 550m 2km* 10km 30km 50km 80km Note: Use this special singlemode transceiver with multimode fiber cable for a nominal maximum link distance of 2 km. This transceiver offsets the transmitted light (so no mode conditioning patch cord is required) and is specifically for use with multimode fiber cable. It is recommended that this transceiver be used on both ends of the cable for best performance. Do not use this transceiver with singlemode fiber cable. solutions for your industrial networking challenges www.sixnet.com iNDUSTRiAL fAST eTHeRNeT fiBeR TRANSCeiVeRS TRANSMiTTeR OPTiCAL CHARACTeRiSTiCS: PARAMeTeR Output Optical Power From Multimode Fiber Output Optical Power From Single Mode Fiber Extinction Ratio Output Center Wavelength 550m 2km2 10km,30km 50km, 80km 550m 2km 10km 30km, 50km, 80km 30km, 50km, 80km Compliant with IEEE802.3z 550m 2km 10km, 30km, 50km, 80km 550m 2km 10km 30km, 50km, 80km 550m 2km 10km, 30km, 50km, 80km 550m 2km 10km 30km,50km, 80km 550m 2km 10km 30km,50km, 80km 0 -3 -3 -18 -20 -20 -23 1610 -18 -20 -20 -23 RATiNG1 550M, 2km2 10km 30km 50km 80km MiN. -9 -9 -4 -4 0 9 830 1270 1280 1500 30 TyP. 850 1310 1310 1550 MAx. -3 -3 2 2 5 860 1355 1355 1580 0.85 4 4 1 260 -117 227 UNiT dBm gxfiber-sfp NOTe For MM fiber dBm dB nm For SM fiber For MM fiber For MM fiber For SM fiber For SM fiber For SM fiber For MM fiber For MM fiber For SM fiber For SM fiber For SM fiber - Spectral Width (RMS) Spectral Width (-20dB) Side Mode Suppression Ratio Rise/Fall time (10%-90%) Relative Intensity Noise Total Jitter Output Eye ReCeiVeR OPTiCAL CHARACTeRiSTiCS: Optical Input Power nm nm dB ps dB/Hz ps 770 1260 1260 -32 -35 -35 -35 -45 - dBm For MM fiber For MM fiber For SM fiber For MM fiber For SM fiber For SM fiber For SM fiber For MM fiber For MM fiber For SM fiber For MM fiber For MM fiber For SM fiber For SM fiber For MM fiber For MM fiber For SM fiber For SM fiber Sensitivity dBm Operating Wavelength nm Loss of Signal - Asserted dBm Loss of Signal - Deasserted dBm Note 1: The distance rating is for reference only. For accurate distance estimations, the power budget should be used. Note 2: The 2 km transmission distance corresponds to using the special GMFIBER-SFP-2K transceiver with multimode fiber cable. This transceiver offsets the transmitted light (so no mode conditioning patch cord is required) and is specifically for use with multimode fiber cable. It is recommended that this transceiver be used on both ends of the cable for best performance. Do not use this transceiver with singlemode fiber cable. All specifications are subject to change. Consult factory for latest info. SIXNET Technology Park 331 Ushers Road • Ballston Lake, NY 12019 • USA 1.518.877.5173 • Fax 1.518.877.8346 • sales@sixnet.com Datasheet GxFIBER-SFP Rev: 15 June, 2009 solutions for your industrial networking challenges www.sixnet.com