DATA SHEET
AAT3113/3114
High Efficiency 1.5X Fractional Charge Pumps for White LED Applications
General Description
Features
The AAT3113 and AAT3114 are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white
LED applications. The devices can be used to produce
current levels up to 20mA for each output from a 2.7V
to 5.5V input. A low external parts count (two 1μF flying
capacitors and two small bypass capacitors at VIN and
OUT) makes these devices ideally suited for small, battery-powered applications.
•
•
•
•
Skyworks' Simple Serial Control (S2Cwire™) interface is
used to enable, disable, and set the LED drive current for
32-level logarithmic scale LED brightness control.
AAT3113 and AAT3114 devices have a thermal management system for protection in the event of a short-circuit
condition on any of the output pins. Built-in soft-start
circuitry prevents excessive inrush current during startup. A high switching frequency enables the use of small
external capacitors. A low-current shutdown feature disconnects the load from VIN and reduces quiescent current
to less than 1μA. The AAT3113 provides four LED current
source outputs, and the AAT3114 provides six. The
AAT3113 is available in a Pb-free 12-pin TSOPJW package, and the AAT3114 is available in a Pb-free 16-pin
QFN package.
•
•
•
•
•
•
•
•
•
•
•
•
•
AAT3113: Four Outputs
AAT3114: Six Outputs
20mA Full-Scale Current
Simple Serial Control (S2Cwire) Interface
▪ 32-Position Logarithmic Scale with Digital Control
Low Noise Constant Frequency Operation
33% Less Input Current Than Doubler Charge Pump
High Accuracy Brightness Matching
Small Application Circuit
Regulated Output Current
Automatic Soft Start
VIN Range: 2.7V to 5.5V
No Inductors
600kHz Switching Frequency
IQ
很抱歉,暂时无法提供与“AAT3114ISN-20-T1”相匹配的价格&库存,您可以联系我们找货
免费人工找货