PD18-73LF

DATA SHEET PD18-73/PD18-73LF: 1.71-1.99 GHz Two-Way 0° Power Splitter/Combiner Applications • Signal distribution/combining • GSM, WCDMA, PCS/DCS Features • Low cost • Low profile • Small SOT-6 package (MSL1, 260 °C per JEDEC J-STD-020) Figure 1. PD18-73/PD18-73LF Block Diagram Description The PD18-73/PD18-73LF are monolithic, two-way in-phase hybrid junction power splitter/combiners for the 1.71 to 1.99 GHz band. Either device offers low loss, high isolation, good input/output matching, and exceptional phase/amplitude balance. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Figure 2. PD18-73/PD18-73LF Pinout – 6-Pin SOT-6 (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200242D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 30, 2011 1 DATA SHEET • PD18-73/PD18-73LF TWO-WAY POWER SPLITTER/COMBINER Table 1. PD18-73/PD18-73LF Signal Descriptions Pin # Name Description Pin # Name Description 1 PORT1 RF port 1 4 IN/SUM RF in or sum port 2 GND RF ground 5 GND RF ground 3 PORT2 RF port 2 6 GND RF ground Table 2. PD18-73/PD18-73LF Absolute Maximum Ratings (Note 1) Parameter Symbol Minimum Maximum Units 1.5 W RF input power, CW (Note 2) PIN RF input power, CW (Note 3) PIN 0.75 W Operating temperature TOP –40 +85 °C Storage temperature TSTG –65 +150 °C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Note 2: When used as a power divider with a 2.0:1 maximum VSWR on all ports. Note 3: When used as a power combiner with a 2.0:1 maximum VSWR on all ports. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. PD18-73/PD18-73LF Electrical Specifications (Note 1) (Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Frequency f Insertion loss less 3 dB split IL Test Condition Min Typical 1.71 PIN @ pin 4 = 0 dBm 0.4 18 Max Units 1.99 GHz 0.6 dB Isolation Iso PIN @ pin 4 = 0 dBm Input VSWR VSWR_IN PIN @ pin 4 = 0 dBm 1.3:1 23 1.5:1 dB – Output VSWR VSWR_OUT PIN @ pin 4 = 0 dBm 1.2:1 1.4:1 – Amplitude balance PIN @ pin 4 = 0 dBm ±0.1 ±0.2 dB Phase balance PIN @ pin 4 = 0 dBm ±1 ±3 deg Note 1: Performance is guaranteed only under the conditions listed in this Table. Electrical and Mechanical Specifications The absolute maximum ratings of the PD18-73/PD18-73LF are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics of the PD18-73/PD18-73LF are illustrated in Figures 3 through 8. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 November 30, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200242D DATA SHEET • PD18-73/PD18-73LF TWO-WAY POWER SPLITTER/COMBINER Typical Performance Characteristics (Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Figure 3. Insertion Loss vs Frequency Figure 4. Output VSWR vs Frequency Figure 5. Isolation vs Frequency Figure 6. Amplitude Balance vs Frequency Figure 7. Input VSWR vs Frequency Figure 8. Phase Balance vs Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200242D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 30, 2011 3 DATA SHEET • PD18-73/PD18-73LF TWO-WAY POWER SPLITTER/COMBINER Recommended Board Layout Package and Handling Information The recommended layout for the PD18-73/PD18-73LF is shown in Figure 9. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions Package dimensions for the 6-pin SOT-6 are shown in Figure 10, and tape and reel dimensions are provided in Figure 11. THE PD18-73/PD18-73LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 °C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Figure 9. PD18-73/PD18-73LF Recommended Board Layout Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 November 30, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200242D DATA SHEET • PD18-73/PD18-73LF TWO-WAY POWER SPLITTER/COMBINER Figure 10. PD18-73/PD18-73LF 6-Pin SOT-6 Package Dimensions Figure 11. PD18-73/PD18-73LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200242D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • November 30, 2011 5 DATA SHEET • PD18-73/PD18-73LF TWO-WAY POWER SPLITTER/COMBINER Ordering Information Model Name PD18-73/PD18-73LF Two-Way Power Splitter/Combiner Manufacturing Part Number PD18-73/PD18-73LF Copyright © 2002-2008, 2011 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 November 30, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200242D