DATA SHEET
PS088-315: 700-1100 MHz Voltage Controlled Phase Shifter
Applications
• Amplifier linearization
• I/Q modulators/demodulators
• Vector modulators
Features
• Wide operating range: 700 to 1100 MHz
• Phase shift range: 85 to 105 degrees
Figure 1. PS088-315 Block Diagram
• Insertion loss variation: 1.5 dB
• Control voltage range: 0 to 12 V
Description
• IP3: +33 dBm @ 900 MHz
The PS088-315 is a voltage controlled phase shifter. The device
uses a monolithic quadrature hybrid and a pair of selected silicon
varactor diodes to achieve a 100-degree phase shift and low
insertion loss. The diodes are biased using an external control
voltage signal. The phase shifter requires no external components
and operates with a control voltage range of 0 to 12 V and a 1 μA
maximum control current.
• Small, MCM (8-pin, 4.9 x 3.2 mm) package (MSL3, 250 °C per
JEDEC J-STD-020)
The device has been designed to operate over the 700 to
1100 MHz frequency band, but is specifically optimized for use as
a wide dynamic range, low distortion phase shifter, centered at
849 to 869 MHz.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Figure 2. PS088-315 Pinout – 8-Pin MCM
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200247C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 4, 2012
1
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Table 1. PS088-315 Signal Descriptions
Pin #
Name
Description
Pin #
Name
Description
1
GND
Ground. Must be connected to PCB ground
using lowest possible inductance path.
5
GND
Ground. Must be connected to PCB ground
using lowest possible inductance path.
2
V_CONTROL
Control voltage input (voltage applied is
nominally equal to the voltage applied to
pin 4)
6
J1
RF input/output
3
GND
Ground. Must be connected to PCB ground
using lowest possible inductance path.
7
GND
Ground. Must be connected to PCB ground
using lowest possible inductance path.
4
V_CONTROL
Control voltage input (voltage applied is
nominally equal to the voltage applied to
pin 2)
8
J2
RF output/input
Table 2. PS088-315 Absolute Maximum Ratings
Maximum
Units
RF input power
Parameter
PIN
+20
dBm
Control voltage
VCONTROL
15
V
Storage temperature
TSTG
–65
+150
°C
Operating temperature
TOP
–40
+85
°C
Note:
Symbol
Minimum
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The
PS088-315 Phase Shifter is a Class 1B Human Body Model (HBM) ESD device.
Electrical and Mechanical Specifications
The absolute maximum ratings of the PS088-315 are provided in
Table 2. Electrical specifications are provided in Table 3.
Performance characteristics for the PS088-315 are illustrated in
Figures 3 through 8.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
October 4, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200247C
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Table 3. PS088-315 Electrical Specifications (Note 1)
(Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Phase shift
Test Condition
Min
Typical
V_CONTROL = 12 V from
V_CONTROL = 0 V,
f = 849 to 869 MHz
85
100
Control voltage range
V_CONTROL
0
Control current
I_CONTROL
V_CONTROL = 12 V
Insertion loss in bandwidth
IL
Insertion loss deviation in bandwidth
Max
Units
deg
12
V
1
μA
V_CONTROL = 0 to 12 V,
849 to 869 MHz
2.8
dB
IL_DEVIATION
V_CONTROL = 0 to 12 V,
849 to 869 MHz
1.8
dB
Return loss in bandwidth
RL
V_CONTROL = 0 to 12 V,
849 to 869 MHz
3rd Order Intermodulation
IM3
PIN = +8 dBm,
V_CONTROL = 0 V,
@ 900 MHz and 905 MHz
3rd Order Intercept Point
IP3
Derived from IM3
10
dB
–50
+33
dBc
dBm
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics
(Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Figure 3. Insertion Loss vs Frequency Over Control Voltage
Figure 4. Input Return Loss vs Frequency Over Control Voltage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200247C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 4, 2012
3
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Figure 5. Output Return Loss vs Frequency Over Control Voltage
Figure 6. Insertion Phase vs Frequency Over Control Voltage
Figure 7. Insertion Loss vs Frequency Over Temperature
(V_CONTROL = 0 V)
Figure 8. Phase Shift Delta vs Frequency Over Temperature
Evaluation Board Description
Package and Handling Information
The PS088-315 Evaluation Board is used to test the performance
of the PS088-315 voltage controlled phase shifter. An assembly
drawing for the Evaluation Board is shown in Figure 9. The
Evaluation Board layer detail characteristics are shown in
Figure 10.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The phase shift level of the PS088-315 is controlled by applying 0
to 12 V to the V_CONTROL pin.
Package Dimensions
THE PS088-315 is rated to Moisture Sensitivity Level 3 (MSL3) at
250 °C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
PCB Design & SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
The PCB layout footprint for the PS088-315 is shown in Figure 11.
Typical case markings are shown in Figure 12. Package
dimensions for the 8-pin MCM are shown in Figure 13, and tape
and reel dimensions are provided in Figure 14.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
October 4, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200247C
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Figure 9. PS088-315 Evaluation Board Assembly Diagram
Figure 10. Layer Detail Physical Characteristics
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200247C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 4, 2012
5
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Figure 11. PS088-315 PCB Layout Footprint
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
October 4, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200247C
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Figure 12. Typical Part Markings
(Top View)
Figure 13. PS088-315 8-Pin MCM Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200247C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 4, 2012
7
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Figure 14. PS088-315 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
October 4, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200247C
DATA SHEET • PS088-315 VOLTAGE CONTROLLED PHASE SHIFTER
Ordering Information
Model Name
PS088-315 Voltage Controlled Phase Shifter
Manufacturing Part Number
PS088-315
Evaluation Board Part Number
PS088-315-EVB
Copyright © 2002-2006, 2011 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200247C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 4, 2012
9