PS214-315

DATA SHEET PS214-315: 1700 – 2800 MHz Voltage-Controlled Phase Shifter Applications  High power amplifier linearization VCONTROL IN/OUT 10 pF  Point-to-point radio  Radar systems Control Voltage  RF signal cancellation VCONTROL IN/OUT Features 10 pF  Wideband frequency operation: 1700 to 2800 MHz  Phase shift range: 70° to 100° Figure 1. PS214-315 Block Diagram  Insertion loss variation: 1.1 dB  IIP3: +33 dBm Description  LGA (8-pin, 4.9 x 3.2 mm) package (MSL1, 260 C per JEDEC J-STD-020) The PS214-315 is a voltage-controlled phase shifter that uses a monolithic quadrature hybrid varactor diode, and a pair of selected silicon varactor diodes to achieve nominal 100-degree phase shift and low insertion loss. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances) compliant packaging. The device is packaged in a small outline Land Grid Array (LGA) surface mount package with the internal elements affixed to an organic BT substrate. GND IN/OUT 1 2 3 7 6 5 VCONTROL 4 GND 8 VCONTROL GND IN/OUT A block diagram of the PS214-315 is shown in Figure 1. The device package and pinout for the 8-pin LGA are shown in Figure 2. GND S2065 Figure 2. PS214-315 Pinout – 8-Pin LGA (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200248C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 1 DATA SHEET • PS214-315 PHASE SHIFTER Table 1. PS214-315 Signal Descriptions Pin # Name 1 IN/OUT Description Pin # RF signal in/out (if used as input, pin 3 is used for the phase shifted RF output and viceversa) 5 Name Description VCONTROL Control voltage input. Control voltage varies phase shift from pin 1 to pin 3 (voltage applied is nominally equal to the voltage applied to pin 8) 2 GND Ground 6 GND Ground 3 IN/OUT RF signal in/out (if used as input, pin 1 is used for the phase shifted RF output and viceversa) 7 VCONTROL Control voltage input. Control voltage varies phase shift from pin 1 to pin 3 (voltage applied is nominally equal to the voltage applied to pin 6) 4 GND Ground 8 GND Ground Table 2. PS214-315 Absolute Maximum Ratings Parameter RF input power Symbol Minimum PIN Control voltage Maximum Units +20 dBm 15 V Operating temperature TA –40 +85 C Storage temperature TSTG –65 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The PS214-315 is rated Class 1B according to Human Body Model (HBM) testing. Electrical and Mechanical Specifications Package and Handling Information Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the PS214-315 are provided in Table 2. Electrical specifications are provided in Table 3. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Typical performance characteristics of the PS214-315 are illustrated in Figures 3 through 8. Package Dimensions Package dimensions for the PS214-315 are provided in Figure 9. The PS214-315 is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200248C DATA SHEET • PS214-315 PHASE SHIFTER Table 3. PS214-315 Electrical Specifications (Note 1) (Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Phase shift Test Condition Min VCONTROL = 12 V, 2110 to 2170 MHz Control voltage Typical Max 75 VCONTROL Units Deg 12 V Control current VCONTROL = 12 V 1 μA Insertion loss in bandwidth VCONTROL = 0 V, 2110 to 2170 MHz 2.5 dB Insertion loss deviation in bandwidth VCONTROL = 0 to 12 V, 2110 to 2170 MHz 1.2 dB Return loss in bandwidth 1700 to 2800 MHz 10 dB PIN = +8 dBm/tone, F1 = 2.140 GHz, F2 = 2.145 GHz, VCONTROL = 0 V +33 dBm rd 3 Order Input Intercept Point IIP3 0 Note 1: Performance is guaranteed only under the conditions listed in this Table. Typical Performance Characteristics (Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Mag_0 V Mag_3 V Mag_6 V Mag_9 V Mag_12 V Mag_1 V Mag_4 V Mag_7 V Mag_10 V Mag_2 V Mag_5 V Mag_8 V Mag_11 V Mag_0 V Mag_3 V Mag_6 V Mag_9 V Mag_12 V 0 Mag_1 V Mag_4 V Mag_7 V Mag_10 V Mag_2 V Mag_5 V Mag_8 V Mag_11 V –10 –14 |S22| Magnitude (dB) |S21| Magnitude (dB) –1 –2 –3 –4 –18 –22 –26 –30 –34 –38 –42 –46 –5 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Frequency (GHz) Figure 3. S21 Magnitude vs Frequency and Control Voltage –50 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Frequency (GHz) Figure 4. S22 Magnitude vs Frequency and Control Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200248C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 3 DATA SHEET • PS214-315 PHASE SHIFTER Mag_0 V Mag_3 V Mag_6 V Mag_9 V Mag_12 V Mag_1 V Mag_4 V Mag_7 V Mag_10 V Phase_0 V Phase_3 V Phase_6 V Phase_9 V Phase_12 V Mag_2 V Mag_5 V Mag_8 V Mag_11 V –10 +200 –18 Phase (Degrees) |S11| Magnitude (dB) Phase_2 V Phase_5 V Phase_8 V Phase_11 V +240 –14 –22 –26 –30 –34 –38 +160 +120 +80 +40 –42 0 –46 –40 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 –50 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Frequency (GHz) Frequency (GHz) Figure 5. S11 Magnitude vs Frequency and Control Voltage Figure 6. Phase Shift vs Frequency and Control Voltage +50 +2.5 +48 +2.0 +1.5 +46 +1.0 +44 IIP3 (dBm) Flatness (dB) Phase_1 V Phase_4 V Phase_7 V Phase_10 V +0.5 0 –0.5 +42 +40 +38 –1.0 +36 –1.5 +34 –2.0 +32 +30 –2.5 0 2 4 6 8 10 Control Voltage (V) Figure 7. Phase Flatness vs Control Voltage 12 0 2 4 6 8 12 Control Voltage (V) Figure 8. IIP3 vs Control Voltage (RF Frequencies = 2.140 GHz and 2.145 GHz @ PIN = +8 dBm) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 10 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200248C DATA SHEET • PS214-315 PHASE SHIFTER 8X 0.004 (0.100 mm) 0.107 (2.740 mm) ± 0.001 ± 0.004 (0.100 mm) (0.02 mm) 0.193 (4.90 mm) ± 0.004 (0.10 mm) 0.091 (2.32 mm) ± 0.003 (0.091 mm) CL 0.126 (3.20 mm) ± 0.004 (0.10 mm) CL Detail C Detail A 0.063 (1.60 mm) Detail B Pin 1 Indicator Top View Side View 0.030 (0.775 mm) ± 0.002 (0.050 mm) 0.031 (0.800 mm) ± 0.002 (0.050 mm) Detail A 0.031 (0.800 mm) ± 0.002 (0.050 mm) 0.024 (0.600 mm) ± 0.002 (0.050 mm) Bottom View Mold 0.078 (2.00 mm) ± 0.002 (0.05 mm) 0.013 (0.32 mm) ± 0.002 (0.4 mm) Detail B Seating Plane Detail C S2064 Figure 9. PS214-315 4.9 x 3.2 mm LGA Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200248C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2010 5 DATA SHEET • PS214-315 PHASE SHIFTER Ordering Information Model Name PS214-315 1700-2800 MHz Voltage Controlled Phase Shifter Manufacturing Part Number PS214-315 Copyright © 2002-2006, 2010 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 October 12, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200248C