SE2537L-R

DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Applications Product Description   The SE2537L is a 5GHz power amplifier offering high linear power for wireless LAN applications. It incorporates a power detector for closed loop monitoring and control of the output power. DSSS 5 GHz WLAN (IEEE802.11a) Access Points, PCMCIA, PC cards Features         The SE2537L offers extreme integration for a simplified design, providing quicker time to market and higher application board production yield. The device integrates the input match, the inter-stage match, a partial output match, the power detector with 20dB of dynamic range and a 3.2GHz notch filter. Two external components are required to complete the design. High output power amplifier 19.5dBm Only 1 external component required Integrated power amplifier enable pin (VEN) Buffered, temperature compensated power detector 3% EVM, @19.5dBm, 64 QAM, 54 Mbps 30 dB Gain Lead Free, Halogen Free and RoHS compliant package 16 pin 3 mm x 3 mm x 0.9 mm QFN For wireless LAN applications, the device meets the requirements of IEEE802.11a and delivers approximately 19.5dBm of linear output power. For high performance applications, the SP1,2 ports are available to connect an optional external capacitor to enhance dynamic EVM performance. Ordering Information Part Number Package Remark SE2537L SE2537L-R SE2537L-EK1 16 Pin QFN 16 Pin QFN Evaluation Kit Samples Tape and Reel Standard The SE2537L bias control establishes the reference voltage required for proper operation and allows enabling and disabling of the power amplifier. Functional Block Diagram VEN RFIN Bias Input Match Interstage Match Interstage Match Output Match RFOut Detector VCC1 VCC2 VCC3 Vdet Figure 1: Functional Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 1 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Pin Out Diagram Figure 2: SE2537L Pin-Out Diagram Pin Out Description Pin No. Name Description 1 N/C No Connect 2 RFin Power Amplifier RF input, DC block required 3,4 N/C No Connect 5 VEN Reference Voltage and Power Amplifier Enable 6 SP2 7 SP1 8 Vdet OUT 9,10 N/C 11 RFout 12 N/C 13 VCC3 14 N/C 15 VCC2 Ports for optional capacitor to improve dynamic EVM Analog Power Detector Output No Connect Power Amplifier RF Output, no DC block required No Connect Third Stage Supply Voltage No Connect Second Stage Supply Voltage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 2 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector 16 VCC1 First Stage Supply Voltage Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum ratings for a long period of time may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage on pins VCC1, VCC2, VCC3 -0.3 +6 V VEN Power Amplifier Enable -0.3 +6 V RFIN RF Input Power, RFout into 50Ω match - 10 dBm TSTG Storage Temperature Range -40 150 °C - 150 °C Min. Max. Unit Tj Maximum Junction Temperature Recommended Operating Conditions Symbol Parameter VCC Supply Voltage 3.0 3.6 V VEN Reference Voltage in TX active condition 2.75 2.85 V TA Ambient Temperature -10 85 °C DC Electrical Characteristics Conditions: VCC = 3.3 V, VEN = 2.8V, TA = 25 °C, as measured on Skyworks Solutions’ SE2537L-EV1 evaluation board, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Unit ICC-802.11a Supply Current POUT = 19.5 dBm, 54 Mbps, 64 QAM - 195 - mA IQC Quiescent Current No RF - 150 - mA IOFF Supply Current VEN = 0 V, No RF - 0.5 10 μA IEN Bias Control Current VEN = 2.8V - 16 - mA VENH Logic High Voltage - 1.3 - VCC V VENL Logic Low Voltage - 0 - 0.5 V Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 3 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector AC Electrical Characteristics 802.11a AC Electrical Characteristics Conditions: VCC = 3.3 V, VEN = 2.8V, f = 5.4 GHz, TA = 25 °C, as measured on Skyworks Solutions’ SE2537L-EV1 evaluation board, unless otherwise noted Symbol Parameter Conditions Min. Typ. Max. Unit - 4.9 - 5.9 GHz fL-U Frequency Range P1dB Output 1dB compression point No modulation - 25 - dBm S21 Small Signal Gain PIN = -25 dBm - 28 - dB Gain Variation over band PIN = -25 dBm, fIN= 4900 to 5900 MHz - 1 - dB - -75 - dBc Harmonic POUT = 19.5 dBm - -60 - dBc - 3.0 - % - 0.5 - us ΔS21 2f 3f EVM tr , tf Error Vector Magnitude Rise and Fall Time POUT = 19.5 dBm, 54 Mbps 64 QAM signal - STAB Stability POUT = 19.5 dBm, 54 Mbps, 64 QAM, VSWR = 6:1, all phases VSWR Tolerance to output load mismatching POUT = 19.5 dBm, 54 Mbps 64 QAM, 64 QAM, VSWR = 6:1, all phases All non-harmonically related outputs less than -50 dBc/100 kHz No damage Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 4 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Power Detector Conditions: VCC = 3.3 V, VEN = 2.8V, f = 5.4 GHz, TA = 25 °C, as measured on Skyworks Solutions’ SE2537L-EV1 evaluation board, unless otherwise noted Symbol Parameter Conditions Min. Typ. Max. Unit - 0 - P1dB dBm PDR POUT detect range VDET Detector voltage POUT = 19.5 dBm - 0.63 - V VDET Detector voltage POUT = 17.5 dBm - 0.55 - V VDET Detector voltage POUT = NO RF - 0.35 - V PDZOUT Output Impedance - 250 - 700 Ω PDZLOAD DC load impedance - 10 - - kΩ SE2537L Temp Compensated Vdet vs. Pout at 5450MHz 0.9 0.8 Vdet (V) 0.7 -30C 0C 0.6 25C 70C 0.5 0.4 0.3 6 8 10 12 14 16 18 20 22 Pout(dBm) Figure 3: SE2537L Power Detector Characteristic over Frequency Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 5 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Package Diagram Figure 4: SE2537L Package Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 6 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Recommended Land and Solder Patterns Figure 5: Recommended Land and Solder Patterns Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 7 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Package Handling Information Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SE2597L is capable of withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For details on both attachment techniques, precautions, and handling procedures recommended, please refer to:  “Quad Flat No-Lead Module Solder Reflow & Rework Information”, Document Number QAD-00045  “Handling, Packing, Shipping and Use of Moisture Sensitive QFN”, Document Number QAD-00044  “ESD Control Policy”, Document Number SQ03-0062 Caution! Class 0 ESD sensitive device Branding Figure 6: SE2537L Branding Tape and Reel Information Parameter Devices Per Reel Reel Diameter Tape Width Value 3000 13 inches 12 millimeters Figure 7: SE2537L-R Tape and Reel Information Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 8 DATA SHEET SE2537L: 5 GHz Power Amplifier with Power Detector Document Change History Revision Date Notes 1.0 Jul 24, 2007 Created 1.1 Sep 20, 2007 Updated application schematic Updated detector characteristics 1.2 Sep 22, 2008 Updated for Halogen Free Updated to include Recommended Landing Pattern Updated to include Tape and Reel Information Updated for ESD warning 1.3 May 26, 2009 Amended back page to include ISO label 1.4 Jul 7, 2009 Updated to correct VEN settings in “Conditions” statement 1.5 Mar 22, 2010 Updated Figure 4 Added reference to QAD-00163 to the package handling information 1.6 Mar 28, 2012 Updated with Skyworks logo and disclaimer statement Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202420A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 9