SE5510T-R

DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End Applications Product Description    The SE5510T is a complete 802.11n WLAN RF frontend module providing all the functionality of the power amplifiers, LNA, power detector, Antenna switches, filtering and associated matching. The SE5510T provides a complete 2.4 GHz and 5 GHz WLAN RF solution from the output of the transceiver to the antennas in a compact form factor. IEEE802.11b DSSS WLAN IEEE802.11a,g,n OFDM WLAN Embedded applications with Bluetooth (Mobile) Features        All RF ports matched to 50 Ω Integrated 2.4,5 GHz PA, 5 GHz LNA, SP3T, SP2T switches and filtering Integrated Power Detector 19.5 dBm @ 3 % EVM, 802.11g, 54 Mbps 18 dBm @ 3 % EVM, 802.11a, 54 Mbps Lead free, Halogen Free and RoHS compliant Compact package, 3 x 4 x 0.6 mm, MSL 1 Ordering Information Part No. Package Remark SE5510T SE5510T-R SE5510T-EK1 28 pin QFN 28 pin QFN N/A Samples Tape & Reel Evaluation kit The receive path is designed to maximize performance by providing both a 5 GHz Low noise amplifier with bypass mode, for use when high power signals are being received. Designed for ease of use, all RF ports are matched to 50 Ω to simplify PCB layout and the interface to the transceiver RFIC. The SE5510T also includes a transmitter power detector for each band with 20 dB of dynamic range. Functional Block Diagram CRX5 LEN5 BT PEN5 TX5 5.4 GHz PA 5.4 GHz LNA ANT5 RX5 DET pwr det ANT2 RX2 TX2 2.4 GHz PA CRX2 CBT PEN2 Figure 1: Functional Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 1 DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End Pin Out Diagram TX5 GND VCC5 VCC4 PEN2 DET LEN5 GND BT 28 27 26 25 24 23 22 21 20 VCC1 1 19 CBT RX5 2 18 ANT5 3 17 RX2 4 16 ANT2 CSP2 5 15 CRX2 GND 11 12 13 14 VCC3 GND CRX5 10 PEN5 9 CSP5 VCC2 TX2 8 DNC 7 GND 6 GND Figure 2: SE5510T Pin Out (Top View Through Package) Pin Out Description Pin No. Name 1 VCC1 2 3 Description Pin No. Name Description Power Supply 16 ANT2 2.4 GHz Antenna port RX5 5 GHz Receive port 17 GND Ground GND Ground 18 ANT5 5 GHz Antenna port 4 RX2 2.4 GHz Receive port 19 CBT Control for Bluetooth port 5 CSP2 2.4 GHz PA bias speed-up 20 BT 6 TX2 2.4 GHz Transmit port 21 GND 7 VCC2 Power supply 22 LEN5 8 GND Ground 23 DET 9 DNC Do Not Connect 10 CSP5 24 PEN2 11 PEN5 25 VCC4 26 VCC5 Power Supply 12 VCC3 5 GHz PA bias speed-up Enable for 5 GHz PA and Transmit switch Power supply Ground Enable for 5 GHz LNA and Receive Switch Power detector output Enable for 2.4 GHz PA and Transmit Switch Power supply 27 GND Ground 13 GND Ground 28 TX5 5 GHz Transmit port 14 CRX5 Control for 5 GHz Receive 15 CRX2 Control for 2.4 GHz Receive Bluetooth port Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 2 DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End Absolute Maximum Ratings These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected workstations. Symbol Definition Min. Max. Unit VCC Supply Voltage -0.3 5.5 V VIN Control Pin Voltages -0.3 3.6 V - +10 dBm Operating Temperature Range -40 85 °C Storage Temperature Range -40 150 °C TXRFIN TA TSTG ESD HBM TX2/TX5, with ANT2/ANT5 terminated in 50Ω JEDEC JESD22-A114 All pins V 1000 Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit VCC Supply Voltage 2.97 3.3 3.6 V TA Ambient Temperature -40 25 85 °C Control Logic Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Parameter min nom max Units Logic input high : VIH 1.6 3.6 V Logic input low : VIL 0 0.3 V Logic input High current : µA IIH (All except CRX2, CRX5) 1 IIH ( CRX2, CRX5) 50 Logic input Low current : µA IIL (All except CRX2, CRX5) 1 IIL ( CRX2, CRX5) 20 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 3 DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End DC Electrical Characteristics Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted Symbol Parameter Conditions Min. Total 802.11g Transmit Supply Current POUT = 20 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN2 = Hi, TXICQ-G Quiescent current , 802.11g Transmit supply Current No RF applied, PEN2=Hi - TXICC-A Total 802.11a Transmit Supply Current POUT = 18 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi POUT = 16 dBm, 54 Mbps OFDM signal, 64QAM, PEN5= Hi - TXICC-G TXICQ-A Quiescent current , 802.11a Transmit supply Current No RF applied, PEN5- Hi RXICC-A Total 802.11a Receive Supply Current CRX5 = Hi, LEN= Hi CRX5 = Hi, LEN = Lo RXICC-G Total 802.11g Receive Supply Current CRX2 = Hi Total BT Supply Current CBT = Hi Total Supply Current No RF, PEN2=PEN5=CRX2=CRX5=CBT=L EN5=0V ICC-BT ICC_OFF Typ. Max. Unit 215 - mA 185 120 - mA 230 mA 210 - 155 - 10 0.25 mA 0.25 mA - 0.25 mA - 5 μA Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 - mA 4 DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End Operating Modes Mode# Mode Description PEN2 PEN5 LEN5 CRX2 CRX5 CBT 0 All Off 0 0 0 0 0 0 1 BT 0 0 0 0 0 1 2 BT + RX5(Low gain) 0 0 0 0 1 1 3 BT + RX5(High gain) 0 0 1 0 1 1 4 BT + TX5 0 1 0 0 0 1 5 RX2 + RX5(Low gain) 0 0 0 1 1 0 6 RX2 + RX5(High gain) 0 0 1 1 1 0 7 TX2 1 0 0 0 0 0 8 TX5 0 1 0 0 0 0 9 RX2 0 0 0 1 0 0 10 RX5 (Low Gain) 0 0 0 0 1 0 11 RX5 (High Gain) 0 0 1 0 1 0 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 202402A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012 5 DATA SHEET SE5510T: Dual Band 802.11n WLAN/BT Front End AC Electrical Characteristics 2.4 GHz Transmit Characteristics Conditions: VCC = 3.3 V, PEN2= Hi, TA = 25 °C, as measured on Skyworks Solutions’ SE5510T-EK1 evaluation board (de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted. Symbol FIN POUT S21 S21_OOB ∆S21 Parameter Condition Min. Typ. - 2400 - 18.5 19.5 18 dBm 27.5 dB Frequency Range Output Power, 54 Mbps OFDM, 64 QAM EVM=3% EVM=2.5% Gain 2400 – 2500 MHz Out of Band Gain