SI32173-C-FM1R

Si3217x-C ProSLIC® Single-Chip FXS Solutions Description - The Si3217x devices are pin-compatible single-channel ProSLIC products that implement a complete foreign exchange station (FXS) telephony interface solution in accordance with all relevant LSSGR, ITU, and ETSI specifications. The Si3217x ProSLIC ICs are available in a 5x7 mm 42-pin QFN package and operate from a 3.3 V supply and support 3.3 V and 1.8 V I/O. The Si32170/1/6/7 devices use a standard PCM/SPI digital interface to connect to SoCs, while the Si32172/3/5 devices use Silicon Labs' proprietary three-wire digital Integrated Serial Interface (ISI) to connect to SoCs with the ISI pre-integrated. The Si3217x integrated dc-dc controller automatically generates the optimal battery voltages required for each line state. The Si3217x ICs are available with voltage ratings of –110 V or –140 V to support a wide range of ringing voltages. See the Ordering Guide for the voltage rating of each Si3217x version. For more information, visit the Si3217x ProSLIC web page. - Features - Complete FXS solution in 5x7 mm - Choice of PCM/SPI Interfaces or 3-wire ISI bus that combines - Tracking dc-dc controller with direct connection to MOSFET Wideband voice support (Si32172/3/6/7) On-hook transmission Loop or ground start operation Smooth polarity reversal A-Law/u-Law companding, linear PCM Software-programmable parameters: - Ringing frequency, amplitude, cadence, and waveshape PCM, SPI, and interrupt data Performs all BORSCHT functions Ideal for short to medium loops Global programmability Internal balanced or unbalanced ringing Patented low power ringing Simplified configuration and diagnostics Supported by ProSLIC API Ultra low power consumption Two-wire ac impedance Transhybrid balance DC current loop feed (10-45 mA) Loop closure and ring trip thresholds Ground key detect threshold DTMF generation DTMF detection (Si32170/1/5) Pulse metering 3.3 V operation Support for 1.8 V I/O Maximum battery up to –140 V Pb-free/RoHS-compliant packaging Applications - Customer Premise Equipment (CPE) VoIP DSL Gateways and Routers Wireless Local Loop (WLL) Integrated Access Devices (IAD) Analog Terminal Adapters (ATA) Small Office/Home Office PBX Ordering Guide Part # Si32170-C-FM1 Si32170-C-GM1 Si32171-C-FM1 Si32171-C-GM1 SoC Interface Max Vbat PCM/SPI DTMF Detection Pulse Metering –140 V 9 9 PCM/SPI –110 V 9 9 ISI –110 V 9 ISI –140 V 9 ISI –110 V PCM/SPI –110 V 9 PCM/SPI –140 V 9 Si32172-C-FM1 Si32172-C-GM1 Si32173-C-FM1 Si32173-C-GM1 Si32175-C-FM1 Si32175-C-GM1 Si32176-C-FM1 Si32176-C-GM1 Si32177-C-FM1 Si32177-C-GM1 Wideband Temperature 0 to 70 °C –40 to 85 °C 0 to 70 °C –40 to 85 °C 0 to 70 °C –40 to 85 °C 0 to 70 °C –40 to 85 °C 9 0 to 70 °C 9 –40 to 85 °C 0 to 70 °C –40 to 85 °C 0 to 70 °C –40 to 85 °C SDO SCLK INT RST PCLK DTMF & Tone Gen Caller ID SPI Control Interface Ringing Generator CODEC SLIC ADC ADC Linefeed Control DAC DAC Linefeed Monitor TIP FXS DTMF & Tone Gen MISO MOSI RING Integrated Serial Interface Interface SPI DSP Line Diagnostics PLL DC-DC DC-DC Controller Controller Si32170/1/6/7 ProSLIC Caller ID Ringing Generator CODEC SLIC ADC ADC Linefeed Control DAC DAC Linefeed Monitor Linefeed CS SDI PCM/ GCI Interface Programmable Programmable AC ACImpedance Impedance and Hybrid DTX Linefeed FSYNC DRX Programmable Programmable AC ACImpedance Impedance and Hybrid Functional Block Diagrams TIP FXS RING DSP Line Diagnostics PSCLK PLL DC-DC DC-DC Controller Controller Si32172/3/5 Copyright © 2013 by Silicon Laboratories 5.10.2013 Si3217x-C ProSLIC® Single-Chip FXS Solutions Selected Electrical Specifications Parameter Ambient Temperature Symbol Test Condition Min Typical Max TA F-Grade 0 25 70 Unit °C G-Grade –40 25 85 °C Supply Voltage VDD 3.13 3.3 3.47 V Battery Voltage, Si32171/2/5/6 VBAT –110 –95 –15 V Battery Voltage, Si32171/3/7 Maximum Loop Resistance (loop + load) DC Differential Output Resistance –140 –130 –15 V RDC,MAX = 430 :, ILOOP = 18 mA, VBAT = –52 V, RPROT = 0 :, — — 2000 : ILOOP < ILIM 160 — 640 : C-Message weighted — 8 12 dBrnC VBAT RLOOP RDO Idle Channel Noise PSRR from VDD, VDDIO @ 3.3 V Longitudinal to Metallic/PCM Balance (forward or reverse) Metallic/PCM to Longitudinal Balance Longitudinal Impedance Longitudinal Current Capability DC Feed Current Psophometric weighted — –82 –78 dBmP RX and TX, 200 Hz to 3.4 kHz — 55 0 dB 200 Hz to 1 kHz 58 60 — dB 1 kHz to 3.4 kHz 53 58 — dB dB 200 Hz to 3.4 kHz 40 – — 200 Hz to 3.4 kHz at TIP or RING — 50 — : Active off-hook 60 Hz Reg 73 = 0x0B — 25 — mA Differential — — 45 mA Common Mode — — 30 mA Differential + Common Mode — — 45 mA dB dB 2-Wire Return Loss 200 Hz to 3.4 kHz 26 30 — Transhybrid Balance 300 Hz to 3.4 kHz 26 — 30 — 53 — ĬJB — 33 — ĬJC — 39 — — 0.75 — Thermal Resistance (QFN-42) Continuous Power Dissipation (QFN-42) Package Information ĬJA PD TA = 85 °C °C/W W 42-Pin QFN/LGA Package Diagram Dimensions  Dimension Min Max A 0.80 0.85 0.90 b 0.20 0.25 0.30 D D2 ProSLIC Nom 5.00 BSC 3.35 3.40 e 0.50 BSC E 7.00 BSC 3.45 E2 5.35 5.40 5.45 E3 1.65 1.70 1.75 E4 3.15 3.20 3.25 L 0.35 0.40 0.45 L1 0.05 0.10 0.15 aaa — — 0.10 bbb — — 0.10 ccc — — 0.08 ddd — — 0.10 Copyright © 2012 by Silicon Laboratories 5.10.2013 Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc. Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.