DATA SHEET
SKY13344-378LF: 2.0-6.0 GHz GaAs SPDT Switch
Applications
WLAN 802.11 a/b/g networks WLAN repeaters ISM band radios Low power transmit receive systems
Output1 INPUT
Output2
Features
Positive voltage control (0 and 1.8 V to 0 and 5.0 V) Broadband frequency range: 2.0-6.0 GHz Very low insertion loss, 0.35 dB typical @ 3 GHz High isolation, 27 dB typical @ 3 GHz Excellent linearity performance, P1dB = +27 dBm Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package (MSL1, 260 C per JEDEC J-STD-020)
VCTL1 VCTL2
S1481
Figure 1. SKY13344-378LF Block Diagram
Description
The SKY13344-378LF is a pHEMT GaAs FET I/C switch. The switch may be used in transmit/receive applications by connecting the RF common port (INPUT, pin 5) to either the OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 pins). The switch is “reflective short” on the isolated port. The switch is manufactured in a compact, 1 x 1 mm, 6-pin exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1.
OUTPUT1
1
6
VCTL1
GND
2
5
INPUT
OUTPUT2
3
4
VCTL2
S1482
Figure 2. SKY13344-378LF Pinout – 6-Pin QFN (Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201095C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 17, 2009 1
DATA SHEET • SKY13344-378LF SPDT SWITCH
Table 1. SKY13344-378LF Signal Descriptions
Pin # 1 2 3 Name OUTPUT1 GND OUTPUT2 Description RF port. Must be DC blocked. Ground RF port. Must be DC blocked. Pin # 4 5 6 VCTL2 INPUT VCTL1 Name Description DC control voltage RF port. Must be DC blocked DC control voltage
Table 2. SKY13344-378LF Absolute Maximum Ratings
Parameter Input power >500 MHz, 5 V >500 MHz, 3 V Storage temperature Operating temperature
Note:
Symbol PIN
Minimum
Typical
Maximum +32 +31
Units dBm dBm C C
TSTG TOP
–65 –40
+150 +85
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY13344-378LF Recommended Operating Conditions
Parameter Frequency Control voltage: low high Operating temperature f VCTL_L VCTL_H TOP Symbol Minimum 2.0 0 1.8 +25 Typical Maximum 6.0 0.2 5.0 Units GHz V V C
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13344-378LF are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4.
Typical performance characteristics of the SKY13344-378LF are illustrated in Figures 3 through 9. The state of the SKY13344-378LF is determined by the logic provided in Table 5.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 December 17, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201095C
DATA SHEET • SKY13344-378LF SPDT SWITCH
Table 4. SKY13344-378LF Electrical Specifications (Note 1) (VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter Frequency Insertion loss Isolation Return loss (insertion loss state) Switching characteristics: Rise/fall time On/off time Video feedthrough Input power for 1 dB compression VCTL = 0 & 1.8 V, 2.45 GHz VCTL = 0 & 2.7 V, 2.45 GHz IIP3 PIN = +5 dBm/tone VCTL = 0 & 1.8 V, 2.45 GHz VCTL = 0 & 2.7 V, 2.45 GHz Error Vector Magnitude EVM 802.11a, 54 Mbps, PIN =
很抱歉,暂时无法提供与“SK40715”相匹配的价格&库存,您可以联系我们找货
免费人工找货