SKY13272-340LF-EVB

PRELIMINARY DATA SHEET SKY13272-340LF: 4 x 2 Switch Matrix 250 MHz–2.15 GHz Features Four inputs, two outputs Any input can be directed to either output ● Only four control lines required ● High interport isolation: 40 dB typ. up to 0.95 GHz ● Miniature QFN-20 4 x 4 mm package ● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 V4 19 V3 20 VDD DBS switching applications, cable modems, cable TV V1 ● V2 Functional Block Diagram and Pin Out Applications 18 17 16 LO 1 15 RO GND 2 14 GND GND 3 13 GND I1 4 12 I3 GND 5 11 GND NEW 8 9 10 I4 7 GND The SKY13272-340LF is a four-input to two-output switch in a low-cost QFN-20 4 x 4 mm package. The SKY13272-340LF enables 16 states, directing any of the four inputs to either of the two outputs. States are selected by four positive voltage control inputs. The switch can operate over the temperature range of -40 °C to +85 °C. 6 GND Description GND ● I2 ● Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications VCTL = 0 V/5V, T = 25 °C, PINPUT = -20 dBm, Z0 = 50 Ω, unless otherwise noted. Typ. Max. Unit Insertion loss Parameter 0.25–0.95 GHz 0.95–2.15 GHz 7.5 8.5 8 9 dB dB Insertion loss flatness 0.25–0.95 GHz 0.95–2.15 GHz 1 1 1.5 1.5 dB dB Isolation 0.25–0.95 GHz 0.95–2.15 GHz 38 28 40 31 dB dB 0.25–2.15 GHz 10 8 15 10 dB dB Return loss Conditions I1, I2, I3, I4 LO, RO Frequency Min. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200179 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006 1 PRELIMINARY DATA SHEET • SKY13272-340LF Operating Characteristics T = 25 °C, Z0 = 50 Ω, unless otherwise noted Parameter Condition Input power for 1 dB compression VCC = 5 V Control voltages VLOW = 0 V to 0.2 V @ 50 µA maximum VHIGH = 2.5 V to VCC @ 50 µA maximum Frequency 0.25–2.15 GHz Min. Typ. Max. 15 Unit dBm Typical Performance Data 0 -10 -20 -30 -40 I -50 -60 -70 Input and Output Return Loss (dB) Insertion Loss, Isolation (above Insertion Loss) (dB) 0 -80 -10 -15 -20 -25 -30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) Frequency (GHz) I1LO and I1RO Paths State 0–15 I1LO and I1RO Paths State 0–15 0 Input and Output Return Loss (dB) 0 Insertion Loss, Isolation (above Insertion Loss) (dB) -5 -10 -20 -30 -40 -50 -60 -70 -80 -5 -10 -15 -20 -25 -30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) Frequency (GHz) I2LO and I2RO Paths State 0–15 I2LO and I2RO Paths State 0–15 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200179 Rev. D PRELIMINARY DATA SHEET • SKY13272-340LF 0 Input and Output Return Loss (dB) Insertion Loss, Isolation (above Insertion Loss) (dB) 0 -10 -20 -30 -40 -50 -60 -70 -80 -10 -15 -20 -25 -30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) Frequency (GHz) I3LO and I3RO Paths State 0–15 I3LO and I3RO Paths State 0–15 0 Input and Output Return Loss (dB) 0 Insertion Loss, Isolation (above Insertion Loss) (dB) -5 -10 -20 -30 -40 -50 -60 -70 -80 -5 -10 -15 -20 -25 -30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Frequency (GHz) Frequency (GHz) I4LO and I4RO Paths State 0–15 I4LO and I4RO Paths State 0–15 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200179 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006 3 PRELIMINARY DATA SHEET • SKY13272-340LF Absolute Maximum Ratings Truth Table(1) Characteristic Value Controls LO (Left Output) RO (Right Output) RF input power 15 dBm Supply voltage 6V Control voltage 0 ≤ VC ≤ 6 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. QFN-20 (4 x 4) 0.008 (0.20 mm) Ref. 0.157 (4.00 mm) BSC Seating Plane Pin 1 Indicator 0.02 +0.03 -0.02 0.157 (4.00 mm) BSC 0.085 (2.15 mm) + 0.004 (0.10 mm) - 0.006 (0.15 mm) Signal Path (Insertion Loss Path)(1) V1 V2 V3 V4 0 I1 → LO, I1 → RO 0 0 0 0 1 I1 → LO, I2 → RO 0 0 0 1 2 I1 → LO, I3 → RO 0 0 1 0 3 I1 → LO, I4 → RO 0 0 1 1 4 I2 → LO, I1 → RO 0 1 0 0 5 I2 → LO, I2 → RO 0 1 0 1 6 I2 → LO, I3 → RO 0 1 1 0 7 I2 → LO, I4 → RO 0 1 1 1 8 I3 → LO, I1 → RO 1 0 0 0 9 I3 → LO, I2 → RO 1 0 0 1 10 I3 → LO, I3 → RO 1 0 1 0 11 I3 → LO, I4 → RO 1 0 1 1 12 I4 → LO, I1 → RO 1 1 0 0 13 I4 → LO, I2 → RO 1 1 0 1 14 I4 → LO, I3 → RO 1 1 1 0 15 I4 → LO, I4 → RO 1 1 1 1 1. All other paths are in isolation state. “1” = 5 V. “0” = 0 V. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. 0.029 (0.75 mm) ± 0.002 (0.05 mm) 0.042 (1.075 mm) Exposed Pad State Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. 0.085 (2.15 mm) + 0.004 (0.10 mm) - 0.006 (0.15 mm) 0.078 (2.0 mm) 0.042 (1.075 mm) 0.078 (2.0 mm) BSC Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 August 15, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200179 Rev. D PRELIMINARY DATA SHEET • SKY13272-340LF Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200179 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 15, 2006 5