SKY13323-378LF

DATA SHEET SKY13323-378LF: 0.1 to 3.0 GHz GaAs SPDT Switch Applications  WLAN 802.11 b/g networks  WLAN repeaters  ISM band radios  Low power transmit receive systems INPUT OUTPUT2 OUTPUT1 Features  Positive voltage control (0 and 1.8 V to 0 and 5.0 V)  Broadband frequency range: 0.1-3.0 GHz  Very low insertion loss, 0.35 dB typical @ 3 GHz  High isolation, 27 dB typical @ 3 GHz  Excellent linearity performance, P1dB = +27 dBm  Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. 201080-001 VCTL1 VCTL2 Figure 1. SKY13323-378LF Block Diagram Description The SKY13323-378LF is a pHEMT GaAs FET I/C switch. The switch may be used in transmit/receive applications by connecting the RF common port (INPUT, pin 5) to either the OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 pins). The switch is “reflective short” on the isolated port. The switch is manufactured in a compact, 1 x 1 mm, 6-pin exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. OUTPUT1 1 6 VCTL1 GND 2 5 INPUT OUTPUT2 3 4 VCTL2 201080-002 Figure 2. SKY13323-378LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201080F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 3, 2017 1 DATA SHEET • SKY13323-378LF SPDT SWITCH Table 1. SKY13323-378LF Signal Descriptions Pin 1 Name OUTPUT1 Description Pin RF port. Must be DC blocked. 4 Name VCTL2 Description DC control voltage 2 GND Ground 5 INPUT RF port. Must be DC blocked 3 OUTPUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage Table 2. SKY13323-378LF Absolute Maximum Ratings1 Parameter Symbol Minimum Typical Maximum Units +32 +31 dBm dBm Input power >500 MHz, 5 V >500 MHz, 3 V PIN Storage temperature TSTG –65 +150 C Operating temperature TOP –40 +85 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13323-378LF Recommended Operating Conditions Maximum Units Frequency Parameter f Symbol Minimum 0.1 Typical 3.0 GHz Control voltage: low high VCTL_L VCTL_H 0 1.8 0.2 5.0 V V Operating temperature TOP +25 C Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13323-378LF are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4. Typical performance characteristics of the SKY13323-378LF are illustrated in Figures 3 through 7. The state of the SKY13323-378LF is determined by the logic provided in Table 5. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 August 3, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201080F DATA SHEET • SKY13323-378LF SPDT SWITCH Table 4. SKY13323-378LF Electrical Specifications1 (VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Frequency Symbol Test Condition f Min Typical Max Units 3.0 GHz 0.20 0.25 0.35 0.30 0.35 0.50 dB dB dB 0.1 Insertion loss 0.1-1.0 GHz 1.0-2.0 GHz 2.0-3.0 GHz Isolation 0.1-1.0 GHz 1.0-2.0 GHz 2.0-3.0 GHz 26.0 24.0 25.0 27.0 25.5 27.0 dB dB dB Return loss (insertion loss state) 0.1-1.0 GHz 1.0-2.0 GHz 2.0-3.0 GHz 14 14 14 21 21 21 dB dB dB 10/90% or 90/10% RF 50% VCTL to 90/10% RF 10 100 ns ns 25 mV VCTL = 0 & 1.8 V, 2.45 GHz VCTL = 0 & 2.7 V, 2.45 GHz +19 dBm +27 dBm +37 dBm +50 dBm 2.5 % Switching characteristics: Rise/fall time On/off time Video feedthrough Input power for 1 dB compression Input IP3 IIP3 PIN = +5 dBm/tone: VCTL = 0 & 1.8 V, 2.45 GHz VCTL = 0 & 2.7 V, 2.45 GHz Error vector magnitude EVM Control voltage: Low High VCTL_L VCTL_H Supply current ICC 802.11g, 54 Mbps, PIN =