SKY13335-381LF

DATA SHEET SKY13335-381LF: 0.1 to 6.0 GHz GaAs SPDT Switch Applications  WLAN 802.11 a/b/g networks  WLAN repeaters  ISM band radios  Low power transmit receive systems RFC OUT2 OUT1 Features  Positive voltage control  Control voltage high = 1.8 to 5.0 V  Broadband, 0.1 to 6.0 GHz  Very low insertion loss, 0.40 dB typical @ 2.5 GHz  High isolation, 27 dB typical @ 2.5 GHz  Excellent linearity performance, P1dB = +29 dBm @ 3 V  Ultra-miniature, MLPD (6-pin, 1.5 x 2.0 x 0.5 mm) package (MSL1, 260 C per JEDEC J-STD-020) VCTL1 VCTL2 S1527 Figure 1. SKY13335-381LF Block Diagram Description The SKY13335-381LF is a pHEMT GaAs FET I/C switch. The device features low insertion loss and positive voltage operation with very low DC power consumption. The switch is manufactured in a compact, low-cost 1.5 x 2.0 mm, 6-pin Micro Leadframe Package Dual (MLPD) package. Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. The switch can be used in transmit/receive applications by connecting the RF common port (RFC, pin 5) to either the OUT1 or OUT2 port (pins 1 or 3, respectively) using a low-loss path (i.e., a positive voltage applied to either the VCTL1 or VCTL2 pins). The switch is a reflective short on the isolated port. OUT1 1 6 VCTL1 GND 2 5 RFC OUT2 3 4 VCTL2 A functional block diagram is shown in Figure 1. The 6-pin MLPD package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. S1526 Figure 2. SKY13335-381LF Pinout – 6-Pin MLPD (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201093D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 12, 2014 1 DATA SHEET • SKY13335-381LF: SPDT SWITCH Table 1. SKY13335-381LF Signal Descriptions (Note 1) Pin 1 Name OUT1 Description Pin Name RF port. Must be DC blocked. 4 VCTL2 Description DC control voltage. 2 GND Ground 5 RFC RF port. Must be DC blocked. 3 OUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage. Note 1: Exposed paddle must be connected to ground. Electrical and Mechanical Specifications Typical performance characteristics for the SKY13335-381LF are shown in Figures 3 through 7. The absolute maximum ratings of the SKY13335-381LF are provided in Table 2, and recommended operating conditions are listed in Table 3. Electrical specifications are provided in Table 4. The state of the SKY13335-381LF is determined by the logic provided in Table 5. Table 2. SKY13335-381LF Absolute Maximum Ratings (Note 1) Parameter Symbol RF input power: f >500 MHz @ 5 V f >500 MHz @ 3 V PIN Operating temperature TOP Storage temperature TSTG Minimum Typical Maximum Units +32 +31 dBm dBm –40 +85 °C –65 +150 °C Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY13335-381LF Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units Frequency f 0.1 6.0 GHz Control voltage: Low High VCTL_L VCTL_H 0 1.8 0.2 5.0 V V Operating temperature TOP +25 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 August 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201093D C DATA SHEET • SKY13335-381LF: SPDT SWITCH Table 4. SKY13335-381LF Electrical Specifications (Note 1) (VCTL = 0 and 3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Frequency Symbol Test Condition f 0.1 to 6.0 GHz 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.5 GHz 2.5 to 3.0 GHz Isolation 0.1 to 6.0 GHz 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.5 GHz 2.5 to 3.0 GHz Return loss (insertion loss state) 0.6 0.2 0.3 0.4 0.5 3rd Order Input Intercept Point IP1dB IIP3 Control voltage VCTL_L VCTL_H Supply current VCTL_L VCTL_H Max Units 6.0 GHz 0.7 0.4 0.5 0.6 0.7 dB dB dB dB dB 24 27 27 27 27 dB dB dB dB dB 0.1 to 6.0 GHz 0.1 to 1.0 GHz 1.0 to 2.0 GHz 2.0 to 2.5 GHz 2.5 to 3.0 GHz 17 20 23 25 25 dB dB dB dB dB 10/90% or 90/10% RF 50% VCTL to 90/10% RF 50 50 ns ns 20 26 24 25 26 Video feedthrough Input power for 1 dB compression Typical 0.1 Insertion loss Switching characteristics: Rise/fall On/off Min 40 mV VCTL = 0 and 1.8 V, 0.9 GHz VCTL = 0 and 3 V,0.9 GHz +18 +29 dBm dBm VCTL = 0 and 1.8 V, 2.45 GHz VCTL = 0 and 3 V, 2.45 GHz +18 +29 dBm dBm VCTL = 0 and 1.8 V, 4.9-5.8 GHz VCTL = 0 and 3 V, 4.9-5.8 GHz +15 +26 dBm dBm VCTL = 0 and 1.8 V, 0.9 GHz VCTL = 0 and 3 V,0.9 GHz +46 +48 dBm dBm VCTL = 0 and 1.8 V,2.45 GHz VCTL = 0 and 3 V,2.45 GHz +40 +45 dBm dBm VCTL = 0 and 1.8 V,5.8 GHz VCTL = 0 and 3 V, 5.8 GHz +37 +41 dBm dBm Pin = 0 dBm/tone 0 1.8 0.2 5.0 5 5 V V μA μA Note 1: Performance is guaranteed only under the conditions listed in this table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated temperatures may reduce reliability of the device. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201093D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 12, 2014 3 DATA SHEET • SKY13335-381LF: SPDT SWITCH Typical Performance Characteristics (VCTL = 0 and 3 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) 0 0 –0.1 –5 –0.3 –15 –0.4 –20 –0.5 –0.6 –25 –30 –0.7 –35 –0.8 –40 –0.9 –45 –1.0 –50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 RFC to OUT1 RFC to OUT2 OUT1 to OUT2 OUT2 to OUT1 –10 RFC to OUT1 RFC to OUT2 Isolation (dB) Insertion Loss (dB) –0.2 8.0 0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) Figure 3. Typical Insertion Loss Figure 4. Typical Isolation +0.1 0 –0.1 0 Input to OUT1 (S11) RFC to OUT1 (S22) RFC to OUT2 (S11) RFC to OUT2 (S33) –10 –0.2 –0.3 Compression (dB) –5 Return Loss (dB) –15 –20 –25 –30 1.8 V 1.9 V 2.0 V 2.5 V 2.7 V 3.0 V 5.0 V –0.4 –0.5 –0.6 –0.7 –35 –0.8 –40 –0.9 –45 –1.0 –50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 0 +4 +8 +12 +16 +20 +24 Figure 6. Compression vs Control Voltage (2450 MHz) Figure 5. Typical Return Loss 0 Compression (dB) –0.2 –0.4 1.7 V 1.8 V 2.1 V 2.5 V 2.7 V 3.0 V 3.3 V 4.0 V 5.0 V –0.6 –0.8 –1.0 –1.2 0 +4 +8 +12 +16 +20 +24 +28 +32 Input Power (dBm) Figure 7. Compression v s Control Voltage (5.2 to 5.8 GHz) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 +28 Input Power (dBm) Frequency (GHz) August 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201093D +32 +36 DATA SHEET • SKY13335-381LF: SPDT SWITCH Table 5. Truth Table (VHIGH = 2 to 5 V) Note: VCTL1 (Pin 6) VCTL2 (Pin 4) RFC to OUT1 Path RFC to OUT2 Path 1 0 Insertion loss Isolation 0 1 Isolation Insertion loss 0 = 0 to 0.2 V 1 = 1.8 to 5.0 V Any state other than described in this table places the device in an undefined state. An undefined state does not damage the device. Evaluation Board Description Package and Handling Information The SKY13335-381LF Evaluation Board is used to test the performance of the SKY13335-381LF SPDT switch. An Evaluation Board schematic diagram is provided in Figure 8. An assembly drawing for the Evaluation Board is shown in Figure 9. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY13335-381LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. Package Dimensions The PCB layout footprint for the SKY13335-381LF is provided in Figure 10. Typical case markings are shown in Figure 11. Package dimensions for the 6-pin MLPD are shown in Figure 12, and tape and reel dimensions are provided in Figure 13. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note, Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation, document number 200083. OUT1 VCTL1 C1 RFC C3 OUT2 C2 C1, C2, and C3 are blocking capacitors (47 pF) VCTL2 S1530 Figure 8. SKY13335-381LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201093D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 12, 2014 5 DATA SHEET • SKY13335-381LF: SPDT SWITCH RFC 0 or +3 V DC Source (Pin 6) C3 R1 0 or +3 V DC Source (Pin 4) R2 C1 OUT1 C2 OUT2 C1, C2, and C3 are blocking capacitors (47 pF) R1 and R2 = 0 Ω S1531 Figure 9. SKY13335-381LF Evaluation Board Assembly Drawing 6X 0.75 0.375 X 45o 6X 0.40 0.60 0.50 Pitch 1.20 6X 0.25 0.55 1.10 S1529 Figure 10. SKY13335-381LF PCB Layout Footprint Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 August 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201093D DATA SHEET • SKY13335-381LF: SPDT SWITCH Pin 1 Indicator Skyworks Part # Figure 11. Typical Case Markings (Top View) C 2.0 1.10 +0.10/–0.15 0.02 +0.03/–0.02 B Pin 1 Indicator Pin 1 Ind. Seating Plane A 2X 0.05 1.5 1.20 +0.10/–0.15 Detail B 0.10 C 2X 6X 3 Detail C Exposed Pad 0.08 C 2X 0.10 C 0.41/0.50 0.10 C Top View Side View Bottom View 6X 0.20 Nom. 0.250 ± 0.10 0.5 CL 0.25 +0.05/–0.07 5 0.10 C A B 2X R0.05 Detail C Detail B 6 Places All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the exposed heat sink slug as well as the terminals.. Plating requirement per source control drawing (SCD) 2504. Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. S1528 Figure 12. SKY13335-381LF 6-Pin MLPD Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201093D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 12, 2014 7 DATA SHEET • SKY13335-381LF: SPDT SWITCH 4.00 0.30 ± 0.05 ∅1.50 + 0.1/–0.0 ∅1.00 Min. 2.00 ± 0.05 (See Note 3) 4.00 (See Note 1) 1.75 ± 0.10 3.50 ± 0.05 (See Note 3) Pin #1 8.00 +0.3/–0.1 A R0.20 Max. Bo A R0.3 Typ. Ko Ao A Notes: 1. 10 sprocket hole pitch cumulative tolerance ±0.2. 2. Chambre in compliance with EIA 481. 3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 4. Carrier tape: black conductive polycarbonate or polystyrene. 5. Cover tape material: transparent conductive PSA. 6. Cover tape size: 9.3mm width. 7. All measurements are in millimeters. Ao = 1.70 Bo = 2.20 Ko = 0.55 Figure 13. SKY13335-381LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 August 12, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201093D S1723 DATA SHEET • SKY13335-381LF: SPDT SWITCH Ordering Information Model Name SKY13335-381LF: SPDT Switch Manufacturing Part Number SKY13335-381LF Evaluation Kit Part Number SK41218-2, Rev. 1 Copyright © 2009, 2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201093D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 12, 2014 9