SKY13351-378LF

DATA SHEET SKY13351-378LF: 20 MHz to 6.0 GHz GaAs SPDT Switch Applications  WLAN 802.11 a/b/g/n networks  WLAN repeaters  ISM band radios  Low power transmit receive systems INPUT OUTPUT2 OUTPUT1 Features  Positive voltage control (0 and 1.8 V to 0 and 5.0 V)  Broadband frequency range: 20 MHz to 6.0 GHz  Very low insertion loss, 0.35 dB typical @ 2.45 GHz  High isolation, 24 dB typical @ 2.45 GHz  Excellent linearity performance, IP0.5dB = +30 dBm  Ultra-miniature, MLPD (6-pin, 1 x 1 mm) package (MSL1, 260 C per JEDEC J-STD-020) Skyworks GreenTM products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04–0074. 201132-001 VCTL1 VCTL2 Figure 1. SKY13351-378LF Block Diagram Description The SKY13351-378LF is a pHEMT GaAs FET I/C switch. The switch may be used in transmit/receive applications by connecting the RF common port (INPUT, pin 5) to either the OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 pins). The switch is “reflective short” on the isolated port. The switch is manufactured in a compact, 1 x 1 mm, 6-pin exposed pad plastic Micro Leadframe Package Dual (MLPD) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. OUTPUT1 1 6 VCTL1 GND 2 5 INPUT OUTPUT2 3 4 VCTL2 S1482 Figure 2. SKY13351-378LF Pinout (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201132I • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 8, 2017 1 DATA SHEET • SKY13351-378LF: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH Table 1. SKY13351-378LF Signal Descriptions Pin 1 Name OUTPUT1 Description Pin RF port. Must be DC blocked. 4 Name VCTL2 Description DC control voltage 2 GND Ground 5 INPUT RF port. Must be DC blocked 3 OUTPUT2 RF port. Must be DC blocked. 6 VCTL1 DC control voltage Electrical and Mechanical Specifications The absolute maximum ratings of the SKY13351-378LF are provided in Table 2. The recommended operating conditions are specified in Table 3 and electrical specifications are provided in Table 4. Typical performance characteristics of the SKY13351-378LF are illustrated in Figures 3 through 9. The state of the SKY13351-378LF is determined by the logic provided in Table 5. Table 2. SKY13351-378LF Absolute Maximum Ratings1 Parameter Symbol Minimum Maximum Units +32 +31 +26 +25 dBm dBm dBm dBm Input power: >500 MHz, 5 V, CW >500 MHz, 2.7 V, CW 802.11g, 54 Mbps, 64 QAM, 2.4-2.5 GHz 802.11g, 54 Mbps, 64 QAM, 5.2-5.8 GHz PIN Storage temperature TSTG –65 +150 C Operating temperature TOP –40 +85 C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SKY13351-378LF Recommended Operating Conditions Max Units Frequency Parameter f Symbol 0.02 Min Typ 6.0 GHz Control voltage: low high VCTL_L VCTL_H 0 1.8 0.2 5.0 V V Operating temperature TOP +25 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 September 8, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201132I C DATA SHEET • SKY13351-378LF: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH Table 4. SKY13351-378LF Electrical Specifications1 (VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Frequency f Insertion loss IL 0.02 to 3.0 GHz 3.0 to 6.0 GHz Isolation Iso 0.02 to 3.0 GHz 3.0 to 6.0 GHz Return loss (insertion loss state) Switching characteristics: Rise/fall time On/off time Min IP0.5dB 22 22 IIP3 Error vector magnitude EVM Control voltage: Low High VCTL_L VCTL_H Supply current ICC Units 6.0 GHz 0.35 0.50 0.50 0.65 dB dB 24 26 dB dB 0.02 to 3.0 GHz 3.0 to 6.0 GHz 25 15 dB dB 10/90% or 90/10% RF 50% VCTL to 90/10% RF 40 100 ns ns 25 mV VCTL = 0 and 1.8 V @ 2.45 GHz +21 +22 dBm VCTL = 0 and 2.7 V @ 2.45 GHz +29 +30 dBm +26 dBm VCTL = 0 and 2.7 V @ 48 MHz Input IP3 Max 0.02 Video feedthrough 0.5 dB input compression point Typ PIN = +20 dBm/tone VCTL = 0 and 1.8 V @ 2.45 GHz +30 +32 dBm VCTL = 0 and 2.7 V @ 2.45 GHz +46 +50 dBm VCTL = 1.8 V @ 5.8 GHz +30 dBm VCTL = 2.7 V @ 5.8 GHz +46 dBm 802.11a, 54 Mbps, PIN =