SKY65112-84LF

PRELIMINARY DATA SHEET SKY65112-84LF: Linear Power Amplifier Driver, 0.5 W 400–2300 MHz Features ● ● ● ● ● Functional Block Diagram Wideband: 400–2300 MHz High linearity: OIP3 > 39 dBm; P1 dB > 27 dBm @ 940 MHz High gain > 18 dB Single DC supply: 5 V Low-cost SMT, lead (Pb)-free package, RoHS-compliant Applications ● ● ● ● UHF TV broadcast TETRA radio GSM/CDMA/EDGE 450/750/850/900MHz bands DCS, PCS, W-CDMA, UMTS Description Skyworks SKY65112 is a high performance power amplifier with superior linearity and output power. The device is fabricated using Skyworks high-reliability Heterojunction Bipolar Transistor (HBT) technology. The device utilizes low-cost, industry-standard, thermally enhanced SOIC-8 lead (Pb)-free, RoHS-compliant packaging. The SKY65112 incorporates on-chip active bias which achieves excellent gain tracking over temperature and voltage variations. The SKY65112 is designed for ultrahigh linearity and wideband operation, making it a cost effective building block for many transceiver applications. The SKY65112 is rated for operation from -40 to +85 °C. It operates from a 5 V power supply voltage. An evaluation board is available upon request. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 1 PRELIMINARY DATA SHEET • SKY65112-84LF Electrical Specifications TA = 25 °C, VCC = 5 V, ICCQ = 260 mA, ZO = 50 Ω, as measured in the evaluation board, unless otherwise noted Parameter Operational bandwidth Total power-added efficiency Gain Output P1 dB Output IP3 Second harmonic Third harmonic Supply current Reference current Operational bandwidth Total power-added efficiency Gain Output P1 dB Output IP3 Second harmonic Third harmonic Supply current Reference current Operational bandwidth Total power-added efficiency Gain Output P1 dB Output IP3 Second harmonic Third harmonic CDMA (IS95) channel power Supply current Reference current Operational bandwidth Total power-added efficiency Gain Output P1 dB Output IP3 Second harmonic Third harmonic W-CDMA channel power Supply current Reference current ICCQ IREF PAE |S21| OP1 dB OIP3 @ 14 dBm POUT/Tone, 1 MHz Spacing POUT @ 2.14 GHz = 10 dBm POUT @ 2.14 GHz = 10 dBm @ -45 dBc ACLR, 2140 MHz @ P1 dB ICCQ IREF 2110 38 15.5 29 37 -55 -72 20 260 2 PAE |S21| OP1 dB OIP3 @ 14 dBm POUT/Tone, 1 MHz Spacing POUT @ 1.96 GHz = 10 dBm POUT @ 1.96 GHz = 10 dBm @ -50 dBc ACPR, 1960 MHz @ P1 dB ICCQ IREF 1930 38 15.1 30 39 -58 -79 22 260 2 2170 PAE |S21| OP1 dB OIP3 @ 14 dBm POUT/Tone, 1 MHz Spacing POUT @ 940 MHz = 10 dBm POUT @ 940 MHz = 10 dBm @ P1 dB ICCQ IREF 920 22 18 27.2 39 -65 -90 260 2 1990 PAE |S21| OP1 dB OIP3 @ 14 dBm POUT/Tone, 1 MHz Spacing POUT @ 450 MHz = 10 dBm POUT @ 450 MHz = 10 dBm 26.5 34 -40 -86 260 2 960 @ P1 dB Symbol Conditions Min. 440 27 22 dBm dBm dBc dBc mA mA MHz % dB dBm dBm dBc dBc mA mA MHz % dB dBm dBm dBc dBc dBm mA mA MHz % dB dBm dBm dBc dBc dBm mA mA Typ. Max. 460 Unit MHz % dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 December 19, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200453 Rev. B PRELIMINARY DATA SHEET • SKY65112-84LF Recommended Operating Conditions Parameter Supply voltage Reference current Reference voltage Operating frequency Supply current Junction temperature ICCQ TJ Symbol VCC IREF VREF 400 260 150 Min. Typ. 5 2 5 2300 Max. Unit V mA V MHz mA °C Typical Performance Data TA = 25 °C, VCC = 5 V, ICCQ = 260 mA, ZO = 50 Ω, unless otherwise noted 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 lS11l lS21l lS22l 20 15 10 5 lS11l lS21l lS22l lSijl (dB) lSijl (dB) 0.37 0.39 0.41 0.43 0.45 0.47 0.49 0.51 0.53 0 -5 -10 -15 -20 -25 -30 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 Frequency (GHz) Frequency (Hz) SKY65112 Tuned for 450 MHz VCC = 5 V, VREF = 5 V, ICCQ = 260 mA Gain 23 22 21 20 19 18 17 16 15 14 13 12 11 20.1 P1 dB = 26.5 dBm ICC SKY65112 Tuned for 940 MHz VCC = 5 V, VREF = 5 V, ICCQ = 260 mA Gain 19 18 17 16 P1 dB = 27 dBm ICC 900 800 700 600 22.1 23.9 25.6 26.9 28.0 470 450 430 410 390 370 350 330 310 290 270 250 230 29.0 Gain (dB) Gain (dB) ICC (mA) ICC (mA) 15 14 13 12 11 10 18.2 20.2 22.3 24.3 26.0 27.2 28.0 500 400 300 200 100 0 POUT (dBm) POUT (dBm) SKY65112 Gain, ICC vs. POUT VCC = 5 V, VREF = 5 V, ICCQ = 450 mA, F = 450 MHz SKY65112 Gain, ICC vs. POUT VCC = 5 V, VREF = 5.1 V, ICCQ = 260 mA, F = 940 MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 3 PRELIMINARY DATA SHEET • SKY65112-84LF 39 38 37 41 40 OIP3 (dBm) 35 34 33 32 31 30 8 10 12 14 16 18 20 22 OIP3 (dBm) 36 39 38 37 36 35 8 10 12 14 16 18 20 22 POUT/Tone (dBm) POUT/Tone (dBm) SKY65112 OIP3, VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, F = 450 MHz, Tone Spacing = 1 MHz lS11l 20 15 10 5 0 -5 -10 -15 -20 -25 -30 1.90 1.94 1.98 2.02 2.06 2.10 2.14 2.18 lS21l lS22l SKY65112 OIP3, VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, F = 940 MHz, Tone Spacing = 1 MHz Gain 16.0 15.5 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 P1 dB = 30.2 dBm ICC 750 700 650 600 550 500 450 400 350 300 250 200 15.1 17.1 19.1 21.1 23.0 24.9 26.7 28.6 30.2 31.5 32.4 Gain (dB) lSijl (dB) ICC (mA) Frequency (GHz) POUT (dBm) SKY65112 Tuned for 1960–2140 MHz VCC = 5 V, VREF = 5 V, ICCQ = 260 mA P1 dB = 29 dBm Gain ICC 16.0 700 15.5 650 15.0 600 14.5 550 14.0 500 13.5 450 13.0 400 12.5 350 12.0 300 11.5 250 11.0 200 10.5 150 15.5 17.4 19.4 21.6 23.6 25.6 27.4 28.8 29.6 30.1 SKY65112 Gain, ICC vs. POUT VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, F = 1960 MHz 42 41 40 OIP3 (dBm) Gain (dB) 39 38 37 36 35 8 10 12 14 16 18 20 22 ICC (mA) POUT (dBm) POUT/Tone (dBm) SKY65112 Gain, ICC vs. POUT VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, F = 2140 MHz SKY65112 OIP3, VCC = 5 V, ICCQ = 260 mA, VREF = 5 V, F = 1960 MHz, Tone Spacing = 1 MHz Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 4 December 19, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200453 Rev. B PRELIMINARY DATA SHEET • SKY65112-84LF 49 47 45 OIP3 (dBm) 43 41 39 37 35 8 10 12 14 16 18 20 22 POUT/Tone (dBm) SKY65112 OIP3, VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, F = 2140 MHz, Tone Spacing = 1 MHz SKY65112 IS-95, F = 1960 MHz VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, Clock freq 9.8304 MHz SKY65112 3GPP WCDMA, F = 2140 MHz QPSK 45° Offset, Filter Root Cosine, Roll-off Factor 0.22, Symbol Rate 3.84 Msym/s VCC = 5 V, VREF = 5 V, ICCQ = 260 mA, Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 5 PRELIMINARY DATA SHEET • SKY65112-84LF Absolute Maximum Ratings Characteristic RF input power (PIN) Supply voltage (VCC) Reference current (IREF) Total supply current (ICC + IREF) Power dissipation (PDISS) Case operating temperature(1) (TC) Storage temperature (TST) Junction temperature (TJ) Thermal resistance (θJC) Value 22 dBm 8V 10 mA 500 mA 2W -40 to +85 °C -50 to +150 °C -50 to +150 °C 42 °C/W Package and Handling Information Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Please refer to Skyworks solder reflow application note, available at www.skyworksinc.com, for instructions on mounting the SKY65112 to a printed circuit board. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note, “Tape and Reel,” document number 101568. 1. Case temperature is defined as the temperature of the surface of the exposed paddle where it is soldered to the printed circuit board ground. This surface must be connected via the lowest possible thermal impedance to an adequate heatsink. Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. Pin Out 1 2 3 4 Exposed Paddle 8 7 6 5 CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Pin Descriptions Technical Description The SKY65112 is a single stage linear amplifier. The device should be externally matched for optimum gain and linearity using external passive components on the input and on the output ports. These external components allow the amplifier to be optimized for the desired operating frequency. The RF input is internally connected to pins 2, 3 and 4 via different lengths of bond wire. The inductances produced by these bond wires can be utilized in the impedance matching circuit on the amplifier’s input port. The RF output is internally connected to pins 6 and 7 for current sharing. Both of these pins should be connected externally to the same printed circuit board trace. The SKY65112 contains a bias circuit for optimum temperature tracking performance. An external resistor is used to set the bias current level. The value of this resistor can be selected to set the amplifier operational mode to Class A, B, or AB, allowing for optimization of linearity and efficiency. Pin No. 1 2, 3, 4 5 6, 7 8 Backside Name VREF RF_In GND RF_Out VCC GND RF input Ground RF output Supply voltage Exposed paddle package ground Descriptions Reference voltage input Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 6 December 19, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200453 Rev. B PRELIMINARY DATA SHEET • SKY65112-84LF Evaluation Board The SKY65112 Evaluation Board is used to test the performance of the SKY65112 power amplifier driver. Schematic diagrams for evaluation circuits, optimized for output third order intercept (OIP3) are shown below. Evaluation board schematics and bills of materials are shown for GSM operation at 940 MHz and also for DCS/UMTS/CDMA operation near 2 GHz. The mounting footprint for the SKY65112 is shown in the mounting footprint schematic. The evaluation board also contains a probe fixture section which makes it possible to conveniently measure scattering parameters with ground-signal-ground probes and a vector network analyzer, directly at the input and output pins of the package. Scattering parameters measured in this fixture are available upon request. Test Procedure Use the following procedure to set up the SKY65112 Evaluation Board for testing. Refer to the mounting footprint schematic for guidance: 1. Connect a 5 V supply to VCC. If available, enable the current limiting function of the power supply to 520 mA. 2. Connect a positive supply to VREF. 3. Connect a signal generator to the RF signal input port. Set it to the desired RF frequency at a power level of -15 dBm or less to the evaluation board, but do not enable the RF signal. 4. Connect a spectrum analyzer to the RF signal output port. 5. Enable the power supply. 6. Adjust VREF to set supply current (ICCQ) to 260 mA 7. Enable the RF signal. 8. Take measurements. Circuit Design Configurations The following design considerations are general in nature and must be followed regardless of final use or configuration. 1. Paths to ground should be made as short as possible. 2. The exposed paddle ground pad of the SKY65112 power amplifier has special electrical and thermal grounding requirements. This paddle is the main thermal conduit for heat dissipation. Since the circuit board acts as the heat sink, it must shunt as much heat as possible from the amplifier. As such, design the connection to the ground pad to dissipate the maximum power produced to the circuit board. Multiple vias to the grounding layer are required. CAUTION: If any of the input signals exceed the rated maximum values, the SKY65112 Evaluation Board can be permanently damaged. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. NOTE: Junction temperature (TJ) of the device increases with a poor connection to the exposed paddle and ground. This reduces the lifetime of the device. 3. External bypass capacitors are required on the VCC line and on pins 1. 4. Bias resistors R2 and R4 and the voltage applied to VREF determine the reference current, IREF, into pin 1. This current controls the supply current through the amplifier stage. A suggested matching circuit is shown in the evaluation board schematic. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 7 PRELIMINARY DATA SHEET • SKY65112-84LF Evaluation Board Schematic VCC C10 VREF R3 R4 C12 C6 C8 R2 C5 1 I REF RF In 8 L4 C7 C9 C11 M1 M2 M3 M4 2 7 M6 N/C 3 6 M8 RF Out M7 4 Exposed Paddle 5 M5 Evaluation Board Component Values vs. Frequency Component R1 R2 R3 R4 L4 C5 C6 C7 C8 C9 C10 C11 C12 M1 M2 M3 M4 M5 M6 M7 M8 450 MHz NA 51 Ω 51 Ω 1.2 kΩ 82 nH (0805) NA NA 100 pF 2.2 µF 2.2 µF 10 µF 10 µF 10 µF 33 nH 4.7 pF 10 nH 10 Ω 5.6 nH 27 pF 5.6 nH 1000 pF 940 MHz NA 51 Ω 51 Ω 1.2 kΩ 82 nH (0805) NA NA 22 pF 0.1 µF 0.1 µF 2.2 µF 4 µF 4 µF 10 nH 2.2 pF 15 nH 0Ω 1 nH 1.5 nH 10 pF 100 pF 1960 MHz 51 Ω 51 Ω 1.2 kΩ NA 47 nH (0603) NA NA 10 pF 0.1 µF 0.1 µF 2.2 µF 4 µF 4 µF 100 pF 2.2 pF NA NA NA NA 3.9 pF 100 pF 2140 MHz 51 Ω 51 Ω 1.2 kΩ NA 47 nH (0603) NA NA 10 pF 0.1 µF 0.1 µF 2.2 µF 4 µF 4 µF 100 pF 2.2 pF NA NA NA NA 3.9 pF 100 pF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 8 December 19, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200453 Rev. B PRELIMINARY DATA SHEET • SKY65112-84LF Test Board Assembly 450, 940 MHz C11 C12 R4 Test Board Assembly 1960, 2140 MHz C11 C12 R3 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 9 PRELIMINARY DATA SHEET • SKY65112-84LF Evaluation Board Test Configuration Power Supply Mounting Footprint 6.985 0.381 1.800 1.524 Minimum Signal Generator Input SKY65112 Evaluation Board Output Power Meter or Spectrum Analyzer 1.270 SOIC-8 0.050 (1.27 mm) BSC Pin 8 Pin 1 Indicator 0.244 (6.20 mm) 0.228 (5.80 mm) 2.710 0.635 Minimum 0.381 diameter plated-through via (minimum 20 recommended) Pin 1 0.066 (1.65 mm) ± 0.005 (0.12 mm) 0.020 (0.51 mm) Max. 0.060 (1.73 mm) Max. 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 Max. (0.41 mm) x 45° Chamfer Dimensions in mm. Exposed Heat Slug 0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 8° Max. 0.115 (2.65 mm) ± 0.008 (0.12 mm) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 10 December 19, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200453 Rev. B PRELIMINARY DATA SHEET • SKY65112-84LF Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 200453 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 19, 2006 11