SKY65152-11

PRODUCT SUMMARY SKY65152-11: 2.4-2.5 GHz WLAN Power Amplifier Applications Description  IEEE 802.11 b/g WLANs  ISM band transmitters  WCS fixed wireless  Wireless access nodes The SKY65152-11 is a Microwave Monolithic Integrated Circuit (MMIC) Power Amplifier (PA) with superior output power, linearity, and efficiency. These features make the SKY65152-11 ideal for Wireless Local Area Network (WLAN) applications. The high linearity (low EVM) and high efficiency of this device makes it ideal for use in the transmit chain of WLAN access points or modems. Features The SKY65152-11 is fabricated using Skyworks high reliability Heterojunction Bipolar Transistor (HBT) InGaP process, which allows for single supply operation while maintaining high efficiency and good linearity. The device is internally matched and mounted in a 20-pin, 6 x 6 mm Multi-Chip Module (MCM) Surface-Mounted Technology (SMT) package, which allows for a highly manufacturable low cost solution.  EVM < 2.5% for POUT > +27 dBm  High gain = 32 dB  Internal RF match with DC block and active bias circuits  Internal on/off control circuit  Internal, high dynamic range power detector  Single DC supply = +5 V  Operating temperature = –40 °C to +85 °C A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. VREF2 PA_ENB RF_IN GND 17 16 VCC1 2 15 VCC_DET PA_ENB 3 14 V_DET VC_BIAS 4 13 VCC2 InterStage Match VCC2 Output Match VCC3 Figure 1. SKY65152-11 Block Diagram V_DET VREF1 5 12 N/C RF_OUT VREF2 6 11 VCC3 S1503 7 8 9 10 GND VCC1 18 RF_OUT InterStage Match Input Match 19 GND Detector Active Bias RF_IN GND 20 RREF3 RREF2 RREF1 VREF3 VCC_DET 1 VREF3 VREF1 VC_BIAS GND GND Skyworks offers lead (Pb)-free RoHS (Restriction of Hazardous Substances) compliant packaging. GND  Small, MCM (20-pin, 6 x 6 mm) package (MSL3, 260 C per JEDEC J-STD-020) S1504 Figure 2. SKY65152-11 Pinout – 20-Pin MCM (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 201305A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 21, 2010 1 PRODUCT SUMMARY • SKY65152-11 POWER AMPLIFIER Ordering Information Model Name SKY65152-11 WLAN Power Amplifier Manufacturing Part Number SKY65152-11 Evaluation Kit Part Number TW16-D280-031 Copyright © 2010 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 2 May 21, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201305A